Prepare Promptkit v0.12.0 release

AGENTS.md

@@ -1,5 +1,6 @@
-Please review `docs/development.md` for initial orientation in this repository
-and follow its task-specific reading guide.
+Start with `docs/development.md` for orientation and use its policy reading guide
+to select the policies applicable to the task. Do not read the entire suite by
+default.
 
-Review and follow `docs/policy/agents.md` before recommending, planning, or
-implementing any changes to this repository.
+Read and follow `docs/policy/agents.md` before recommending, planning, or
+implementing repository changes.

COPYRIGHT

@@ -16,4 +16,8 @@ but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 GNU Lesser General Public License for more details.
 
-Third-party code and assets are subject to their respective license terms.
+Policy documents copied or adapted from Standard Repository Policies remain licensed
+under CC-BY-SA-4.0. See docs/oss/attribution.md for the affected material,
+upstream credit, and license links.
+
+Third-party code and assets are subject to their respective license terms.

README.md

@@ -8,7 +8,8 @@ gitea.maximumdirect.net/eric/promptkit
 ```
 
 The root `promptkit` package provides the supported public engine. Consumers
-can configure filesystem or in-memory prompt, profile, and schema sources,
+can configure file, embedded, or programmatic backend, profile, and prompt
+definitions alongside filesystem or in-memory schemas,
 prepare requests without generation, run requests with the built-in
 OpenAI-compatible client, or inject their own model client and artifact reader.
 
@@ -20,9 +21,12 @@ Run the maintained offline preparation example from the repository root:
 go run ./examples/go-library/prepare
 ```
 
-It loads a repository-local prompt, supplies an in-memory profile and inline
-input, and prints deterministic preparation metadata without contacting a
-provider or requiring credentials. Read the
+It loads a repository-local prompt, supplies a programmatic profile and inline
+input, inspects the captured configuration, and prints deterministic
+preparation metadata without contacting a provider or requiring credentials.
+The [consumer guide](docs/consumers/pkg-promptkit.md) also shows a local backend,
+ordered file/embedded sources, programmatic mappings, and how to replace an
+engine when source files change. Read the
 [example source](examples/go-library/prepare/main.go), the
 [Go package consumer guide](docs/consumers/pkg-promptkit.md), and the
 [framework format reference](docs/formats.md) to build a consumer workflow.
@@ -33,6 +37,13 @@ boundary and constraints that framework work must preserve.
 
 ## Release Guidance
 
+Consumers upgrading to `v0.12.0` should read the
+[v0.12.0 release notes](docs/releases/v0.12.0.md) for the intentional ConfigKit
+configuration and public construction API migration.
+
+The [v0.11.2 release notes](docs/releases/v0.11.2.md) cover policy alignment
+and copied-policy attribution updates.
+
 The [v0.11.1 release notes](docs/releases/v0.11.1.md) cover the MIT-licensed
 catalog updates and licensing documentation improvements.
 

appended_messages_contract_test.go

@@ -29,15 +29,7 @@ func TestAppendedMessagesComposeFrozenEffectivePrompt(t *testing.T) {
 		{Role: promptkit.RoleUser, Content: "corrective request", CacheControl: cacheControl},
 	}
 	client := &fakeLLMClient{response: &promptkit.GenerateResponse{Content: "output"}}
-	engine, err := promptkit.NewEngine(
-		promptkit.Config{},
-		promptkit.WithPromptFS(contractPromptFS("prompt", "profile", "configured prompt"), "."),
-		promptkit.WithProfiles(promptkit.Profile{ID: "profile", Endpoint: "http://example.test/v1", Model: "model"}),
-		promptkit.WithLLMClient(client),
-	)
-	if err != nil {
-		t.Fatalf("construct engine: %v", err)
-	}
+	engine := newSimpleEngine(t, "configured prompt", promptkit.WithLLMClient(client))
 	request := promptkit.RunRequest{PromptID: "prompt", AppendedMessages: appended}
 
 	plain, err := engine.Prepare(context.Background(), promptkit.RunRequest{PromptID: "prompt"})
@@ -101,14 +93,9 @@ func TestAppendedMessagesComposeFrozenEffectivePrompt(t *testing.T) {
 	}
 }
 
-func TestInvalidAppendedMessagesFailBeforeSourceOrModelWork(t *testing.T) {
-	promptSource := &inspectionCountingFS{}
+func TestInvalidAppendedMessagesFailBeforeModelWork(t *testing.T) {
 	var modelCalls atomic.Int64
-	engine, err := promptkit.NewEngine(
-		promptkit.Config{},
-		promptkit.WithPromptFS(promptSource, "."),
-		promptkit.WithLLMClient(countingLLMClient{calls: &modelCalls}),
-	)
+	engine, err := promptkit.NewEngine(promptkit.Config{}, promptkit.WithLLMClient(countingLLMClient{calls: &modelCalls}))
 	if err != nil {
 		t.Fatalf("construct engine: %v", err)
 	}
@@ -136,9 +123,6 @@ func TestInvalidAppendedMessagesFailBeforeSourceOrModelWork(t *testing.T) {
 			}
 		})
 	}
-	if promptSource.opens.Load() != 0 {
-		t.Fatalf("invalid appended message opened prompt sources %d times", promptSource.opens.Load())
-	}
 	if modelCalls.Load() != 0 {
 		t.Fatalf("invalid appended message invoked the model %d times", modelCalls.Load())
 	}

backends.go

@@ -1,107 +1,69 @@
 package promptkit
 
 import (
+	"gitea.maximumdirect.net/eric/ConfigKit"
 	"gitea.maximumdirect.net/eric/promptkit/internal/backend"
-	"gitea.maximumdirect.net/eric/promptkit/internal/domain"
 )
 
-// BackendOpenRouter is the reserved ID of Promptkit's built-in OpenRouter
-// backend.
+// BackendOpenRouter identifies the maintained OpenRouter backend.
 const BackendOpenRouter = backend.OpenRouterID
 
-// BackendRakestrawHome is the reserved ID of Promptkit's built-in
-// Rakestrawhome backend.
+// BackendRakestrawHome identifies the maintained Rakestrawhome backend.
 const BackendRakestrawHome = backend.RakestrawHomeID
 
-// BackendLocal is the case-sensitive conventional ID used by [LocalBackend].
-// It is not a built-in or reserved backend and must be registered with
-// [WithBackend].
+// BackendLocal is a conventional ID for a caller-configured local backend.
 const BackendLocal = "local"
 
-// Backend configures one engine-scoped OpenAI-compatible backend.
-//
-// Backend has no stable JSON representation. Use keyed literals so additions
-// to this configuration value do not break source compatibility.
-type Backend struct {
-	// ID is the stable, case-sensitive registry key. NewEngine trims it and
-	// requires a non-blank value. Built-in backend IDs are reserved.
-	ID string
-	// Endpoint is the OpenAI-compatible base endpoint. NewEngine trims it and
-	// requires an absolute HTTP or HTTPS URL with a host and without user
-	// information, a query string, or a fragment. Paths are allowed.
-	Endpoint string
-	// APIKeyEnv optionally names an environment lookup source for an API key.
-	// NewEngine trims it and requires the portable form [A-Za-z_][A-Za-z0-9_]*.
-	// A direct RunRequest.APIKey takes precedence. When no usable credential is
-	// available, the built-in client omits Authorization; injected clients own
-	// their own credential-resolution behavior. Store only the name, never a
-	// credential value.
-	APIKeyEnv string
-	// ExtraParams contains backend-wide request defaults. Values must be
-	// JSON-compatible, finite, acyclic, and keyed by non-empty strings. Keys
-	// must not be model, session_id, messages, temperature, max_tokens, top_p,
-	// service_tier, reasoning_effort, or response_format. An empty map supplies
-	// no defaults. NewEngine deeply copies the map and rejects excessively deep
-	// or large values for safety.
-	ExtraParams map[string]any
-	// ConcurrencyLimit is the maximum number of simultaneous model-generation
-	// calls allowed for this backend within one Engine. Zero leaves the backend
-	// unlimited. A negative value makes NewEngine fail with ErrInvalidConfig.
-	ConcurrencyLimit int
-	// QueueCapacity controls how many additional Run or RunPrepared calls may
-	// be admitted beyond ConcurrencyLimit. Nil uses 1024 when ConcurrencyLimit
-	// is positive; a pointer uses its exact value, including zero. The pointed-to
-	// value must be non-negative, and QueueCapacity must be nil when
-	// ConcurrencyLimit is zero. Their sum must fit in an int. WithBackend copies
-	// the value and does not retain the pointer.
+// BackendConfig is a presence-aware convenience value for a keyed backend
+// definition. Nil pointer fields are omitted, while non-nil pointers preserve
+// explicit zero or blank values. A nil ExtraParams map is omitted; a non-nil
+// empty map supplies an empty mapping. Use raw ConfigKit Mapping inputs for
+// explicit null. BackendConfig has no stable JSON representation.
+type BackendConfig struct {
+	// Endpoint is the required absolute HTTP(S) base URL after all layers merge.
+	Endpoint *string
+	// APIKeyEnv optionally names an environment variable, not a credential.
+	APIKeyEnv *string
+	// ConcurrencyLimit is zero for unlimited generation; negative is invalid.
+	ConcurrencyLimit *int
+	// QueueCapacity defaults to 1024 for positive concurrency when omitted.
+	// An explicit value, including zero, requires positive concurrency.
 	QueueCapacity *int
+	// ExtraParams supplies JSON-compatible provider request defaults.
+	ExtraParams map[string]any
 }
 
-// LocalBackend returns a caller-owned Backend for a conventional local
-// OpenAI-compatible endpoint. It sets ID to BackendLocal and copies endpoint
-// and concurrencyLimit into Endpoint and ConcurrencyLimit without
-// normalization or validation. APIKeyEnv, ExtraParams, and QueueCapacity keep
-// their zero values.
-//
-// LocalBackend does not read environment variables, register the value, or
-// mutate engine or package state. Supply the returned value through
-// [WithBackend]; [NewEngine] then applies the ordinary backend validation and
-// concurrency semantics, including default queue capacity for a positive
-// limit, unlimited behavior for zero, and ErrInvalidConfig for a negative
-// limit.
-func LocalBackend(endpoint string, concurrencyLimit int) Backend {
-	return Backend{
-		ID:               BackendLocal,
-		Endpoint:         endpoint,
-		ConcurrencyLimit: concurrencyLimit,
+// BackendSource creates a labeled ConfigKit mapping from keyed backend values.
+// It encodes fields without validating them; NewEngine validates the final
+// effective configuration after all selected source layers are combined.
+// Mapping captures a copy of supported input values at creation; unsupported
+// values fail when the source is loaded.
+func BackendSource(label string, backends map[string]BackendConfig) configkit.Source {
+	definitions := make(map[string]any, len(backends))
+	for id, config := range backends {
+		fields := make(map[string]any)
+		if config.Endpoint != nil {
+			fields["endpoint"] = *config.Endpoint
+		}
+		if config.APIKeyEnv != nil {
+			fields["api_key_env"] = *config.APIKeyEnv
+		}
+		if config.ConcurrencyLimit != nil {
+			fields["concurrency_limit"] = *config.ConcurrencyLimit
+		}
+		if config.QueueCapacity != nil {
+			fields["queue_capacity"] = *config.QueueCapacity
+		}
+		if config.ExtraParams != nil {
+			fields["extra_params"] = providerMapForMapping(config.ExtraParams)
+		}
+		definitions[id] = fields
 	}
+	return configkit.Mapping(label, map[string]any{"backends": definitions})
 }
 
-// WithBackend adds one Backend registration to the constructed Engine.
-//
-// Registrations accumulate in option order. Every normalized ID must be unique
-// across consumer registrations and built-ins; a duplicate or invalid
-// definition makes NewEngine fail with ErrInvalidConfig. Built-in IDs,
-// including [BackendOpenRouter] and [BackendRakestrawHome], cannot be
-// replaced. The immutable registration is scoped to the resulting Engine and
-// cannot be enumerated, replaced, removed, or mutated after construction.
-// WithBackend does not install package-global state.
-func WithBackend(backend Backend) Option {
-	queueCapacity := 0
-	queueCapacitySet := backend.QueueCapacity != nil
-	if queueCapacitySet {
-		queueCapacity = *backend.QueueCapacity
-	}
-	return optionFunc(func(options *engineOptions) error {
-		options.internal.AddBackend(domain.Backend{
-			ID:               backend.ID,
-			Endpoint:         backend.Endpoint,
-			APIKeyEnv:        backend.APIKeyEnv,
-			ExtraParams:      backend.ExtraParams,
-			ConcurrencyLimit: backend.ConcurrencyLimit,
-			QueueCapacity:    queueCapacity,
-			QueueCapacitySet: queueCapacitySet,
-		})
-		return nil
-	})
+// LocalBackend supplies endpoint and concurrency pointers for a caller-chosen
+// backend ID; it does not select an ID or validate either value.
+func LocalBackend(endpoint string, concurrencyLimit int) BackendConfig {
+	return BackendConfig{Endpoint: &endpoint, ConcurrencyLimit: &concurrencyLimit}
 }

capacity_contract_test.go

@@ -7,6 +7,7 @@ import (
 	"testing"
 	"time"
 
+	"gitea.maximumdirect.net/eric/ConfigKit"
 	"gitea.maximumdirect.net/eric/promptkit"
 )
 
@@ -150,17 +151,7 @@ func TestUnlimitedBackendsRetainInjectedClientConcurrency(t *testing.T) {
 		{
 			name: "endpoint-only profile",
 			configure: func(t *testing.T, client promptkit.LLMClient) *promptkit.Engine {
-				engine, err := promptkit.NewEngine(promptkit.Config{},
-					promptkit.WithPromptFS(contractPromptFS("prompt", "profile", "message"), "."),
-					promptkit.WithProfiles(promptkit.Profile{
-						ID: "profile", Endpoint: "http://endpoint.example/v1", Model: "model",
-					}),
-					promptkit.WithLLMClient(client),
-				)
-				if err != nil {
-					t.Fatalf("construct endpoint-only engine: %v", err)
-				}
-				return engine
+				return newSimpleEngine(t, "message", promptkit.WithLLMClient(client))
 			},
 		},
 	}
@@ -250,27 +241,35 @@ func newBackendCapacityEngine(
 	reader promptkit.ArtifactReader,
 ) *promptkit.Engine {
 	t.Helper()
-	promptFS := contractPromptFS("prompt", "profile", "message")
+	promptID, content := "prompt", "message"
+	var inputs []any
 	if reader != nil {
-		promptFS = contractInputPromptFS()
+		promptID, content = "input-prompt", `{{input "input"}}`
+		inputs = []any{map[string]any{"name": "input", "required": true}}
 	}
-	options := []promptkit.Option{
-		promptkit.WithPromptFS(promptFS, "."),
-		promptkit.WithBackend(promptkit.Backend{
-			ID:               "limited",
-			Endpoint:         "http://backend.example/v1",
-			ConcurrencyLimit: limit,
-			QueueCapacity:    queueCapacity,
-		}),
-		promptkit.WithProfiles(promptkit.Profile{
-			ID: "profile", BackendID: "limited", Model: "model",
-		}),
-		promptkit.WithLLMClient(client),
+	backend := map[string]any{"endpoint": "http://backend.example/v1", "concurrency_limit": limit}
+	if queueCapacity != nil {
+		backend["queue_capacity"] = *queueCapacity
 	}
+	definition := map[string]any{
+		"default_profile": "profile",
+		"messages":        []any{map[string]any{"role": "user", "content": content}},
+		"output":          map[string]any{"format": "text", "validation_mode": "none"},
+	}
+	if inputs != nil {
+		definition["inputs"] = inputs
+	}
+	options := []promptkit.Option{promptkit.WithLLMClient(client)}
 	if reader != nil {
 		options = append(options, promptkit.WithArtifactReader(reader))
 	}
-	engine, err := promptkit.NewEngine(promptkit.Config{}, options...)
+	engine, err := promptkit.NewEngine(promptkit.Config{Sources: promptkit.ConfigurationSources{Main: &configkit.Input{
+		Source: configkit.Mapping("capacity fixture", map[string]any{
+			"backends": map[string]any{"limited": backend},
+			"profiles": map[string]any{"profile": map[string]any{"backend": "limited", "model": "model"}},
+			"prompts":  map[string]any{promptID: map[string]any{"1": definition}},
+		}),
+	}}}, options...)
 	if err != nil {
 		t.Fatalf("construct capacity engine: %v", err)
 	}

configuration_inspection.go

@@ -0,0 +1,82 @@
+package promptkit
+
+import (
+	"fmt"
+	"io"
+
+	"gitea.maximumdirect.net/eric/ConfigKit"
+	"gitea.maximumdirect.net/eric/promptkit/internal/configuration"
+)
+
+// ConfigurationInspection is a read-only view of one Engine's captured
+// effective configuration and source history. It does not expose typed
+// configuration values, filesystem contexts, or runtime credentials.
+// Report content may include application prompt and provider data, so callers
+// choose where and to whom to disclose it.
+type ConfigurationInspection struct {
+	source configuration.Inspection
+}
+
+// InspectConfiguration returns the ConfigKit inspection view captured by this
+// Engine. It does not reload sources, resolve credentials, or contact a model.
+// A nil Engine returns ErrInvalidConfig.
+func (e *Engine) InspectConfiguration() (ConfigurationInspection, error) {
+	if e == nil || e.internal == nil {
+		return ConfigurationInspection{}, fmt.Errorf("%w: engine is nil", ErrInvalidConfig)
+	}
+	return ConfigurationInspection{source: e.internal.InspectConfiguration()}, nil
+}
+
+// Metadata returns detached effective presence and history records.
+func (v ConfigurationInspection) Metadata() configkit.Metadata {
+	if v.source == nil {
+		return configkit.Metadata{}
+	}
+	return v.source.Metadata()
+}
+
+// Sources returns a detached list of loaded source descriptions.
+func (v ConfigurationInspection) Sources() []configkit.SourceInfo {
+	if v.source == nil {
+		return nil
+	}
+	return v.source.Sources()
+}
+
+// Diagnostics returns detached nonfatal load diagnostics.
+func (v ConfigurationInspection) Diagnostics() []configkit.Diagnostic {
+	if v.source == nil {
+		return nil
+	}
+	return v.source.Diagnostics()
+}
+
+// Explain returns detached effective and historical values for a known path.
+// Dynamic credential-shaped provider keys are redacted by ConfigKit; ordinary
+// prompt and provider content is not automatically safe to disclose.
+func (v ConfigurationInspection) Explain(path configkit.Path) (configkit.Explanation, bool) {
+	if v.source == nil {
+		return configkit.Explanation{}, false
+	}
+	return v.source.Explain(path)
+}
+
+// WriteEffective writes ConfigKit's redacted effective YAML. Writer errors
+// remain available through errors.Is and errors.As. The zero view returns
+// ErrInvalidConfig.
+func (v ConfigurationInspection) WriteEffective(w io.Writer) error {
+	if v.source == nil {
+		return ErrInvalidConfig
+	}
+	return v.source.WriteEffective(w)
+}
+
+// WriteExplanation writes ConfigKit's redacted history for path. Unknown paths
+// produce no output; writer errors remain inspectable. The zero view returns
+// ErrInvalidConfig.
+func (v ConfigurationInspection) WriteExplanation(w io.Writer, path configkit.Path) error {
+	if v.source == nil {
+		return ErrInvalidConfig
+	}
+	return v.source.WriteExplanation(w, path)
+}

configuration_inspection_contract_test.go

@@ -0,0 +1,200 @@
+package promptkit_test
+
+import (
+	"bytes"
+	"context"
+	"errors"
+	"io"
+	"strings"
+	"sync"
+	"sync/atomic"
+	"testing"
+	"testing/fstest"
+
+	"gitea.maximumdirect.net/eric/ConfigKit"
+	"gitea.maximumdirect.net/eric/promptkit"
+)
+
+func TestConfigurationInspectionReportsLiteralKeysAndRedactedHistory(t *testing.T) {
+	engine, err := promptkit.NewEngine(promptkit.Config{Sources: promptkit.ConfigurationSources{
+		Underlays: []configkit.Underlay{
+			{Inputs: []configkit.Input{{Source: configkit.Mapping("defaults", map[string]any{
+				"backends": map[string]any{"local": map[string]any{
+					"endpoint": "https://example.invalid/v1", "api_key_env": "OPTIONAL_KEY",
+					"extra_params": map[string]any{"token": "private-sentinel", "visible": "public-value"},
+				}},
+				"profiles": map[string]any{
+					"base.v1":    map[string]any{"backend": "local", "model": "default-model"},
+					"literal/id": map[string]any{"extends": "base.v1"},
+				},
+			})}}},
+			{Inputs: []configkit.Input{{Source: configkit.Mapping("operator", map[string]any{
+				"profiles": map[string]any{"base.v1": map[string]any{"model": "operator-model"}},
+			})}}},
+		},
+	}})
+	if err != nil {
+		t.Fatalf("construct layered engine: %v", err)
+	}
+	view, err := engine.InspectConfiguration()
+	if err != nil {
+		t.Fatalf("inspect configuration: %v", err)
+	}
+	modelPath := configkit.Keys("profiles", "base.v1", "model")
+	model, found := view.Explain(modelPath)
+	if !found || !strings.Contains(model.Effective.YAML, "operator-model") || len(model.History) < 2 {
+		t.Fatalf("layered model explanation = (%+v, %t)", model, found)
+	}
+	inheritedPath := configkit.Keys("profiles", "literal/id", "model")
+	inherited, found := view.Explain(inheritedPath)
+	if !found || !strings.Contains(inherited.Effective.YAML, "operator-model") || len(inherited.History) == 0 || !view.Metadata().IsExplicit(inheritedPath) {
+		t.Fatalf("literal-key inheritance explanation = (%+v, %t)", inherited, found)
+	}
+	if inheritedPath.String() != "/profiles/literal~1id/model" {
+		t.Fatalf("literal-key path = %q", inheritedPath)
+	}
+	secretPath := configkit.Keys("backends", "local", "extra_params", "token")
+	secret, found := view.Explain(secretPath)
+	if !found || !secret.Effective.Redacted || strings.Contains(secret.Effective.YAML, "private-sentinel") {
+		t.Fatalf("credential-shaped provider value was not redacted: (%+v, %t)", secret, found)
+	}
+	var effective bytes.Buffer
+	if err := view.WriteEffective(&effective); err != nil {
+		t.Fatalf("write effective configuration: %v", err)
+	}
+	if strings.Contains(effective.String(), "private-sentinel") || !strings.Contains(effective.String(), "OPTIONAL_KEY") || !strings.Contains(effective.String(), "public-value") {
+		t.Fatalf("unexpected effective report: %s", effective.String())
+	}
+	var explanation bytes.Buffer
+	if err := view.WriteExplanation(&explanation, secretPath); err != nil || strings.Contains(explanation.String(), "private-sentinel") {
+		t.Fatalf("secret explanation = (%q, %v)", explanation.String(), err)
+	}
+
+	sources := view.Sources()
+	if len(sources) == 0 {
+		t.Fatal("inspection returned no sources")
+	}
+	originalLabel := sources[0].Label
+	sources[0].Label = "changed"
+	if view.Sources()[0].Label != originalLabel {
+		t.Fatal("source mutation reached retained inspection")
+	}
+	model.History[0].After.YAML = "changed"
+	if again, ok := view.Explain(modelPath); !ok || again.History[0].After.YAML == "changed" {
+		t.Fatal("explanation mutation reached retained inspection")
+	}
+	history := view.Metadata().History(modelPath)
+	if len(history) == 0 {
+		t.Fatal("metadata history is empty")
+	}
+	history[0].Reasons = []string{"changed"}
+	if again := view.Metadata().History(modelPath); len(again) == 0 || (len(again[0].Reasons) > 0 && again[0].Reasons[0] == "changed") {
+		t.Fatal("metadata mutation reached retained inspection")
+	}
+}
+
+type failingInspectionWriter struct{ err error }
+
+func (writer failingInspectionWriter) Write([]byte) (int, error) { return 0, writer.err }
+
+func TestConfigurationInspectionZeroAndWriterErrors(t *testing.T) {
+	var engine *promptkit.Engine
+	if _, err := engine.InspectConfiguration(); !errors.Is(err, promptkit.ErrInvalidConfig) {
+		t.Fatalf("nil engine inspection = %v", err)
+	}
+	var empty promptkit.ConfigurationInspection
+	path := configkit.Keys("profiles", "missing")
+	if _, found := empty.Metadata().Lookup(path); found || len(empty.Sources()) != 0 || len(empty.Diagnostics()) != 0 {
+		t.Fatal("zero inspection reported configuration")
+	}
+	if _, found := empty.Explain(path); found {
+		t.Fatal("zero inspection explained an unknown path")
+	}
+	if err := empty.WriteEffective(io.Discard); !errors.Is(err, promptkit.ErrInvalidConfig) {
+		t.Fatalf("zero effective writer = %v", err)
+	}
+	if err := empty.WriteExplanation(io.Discard, path); !errors.Is(err, promptkit.ErrInvalidConfig) {
+		t.Fatalf("zero explanation writer = %v", err)
+	}
+
+	valid, err := promptkit.NewEngine(promptkit.Config{})
+	if err != nil {
+		t.Fatalf("construct engine: %v", err)
+	}
+	view, err := valid.InspectConfiguration()
+	if err != nil {
+		t.Fatalf("inspect configuration: %v", err)
+	}
+	writeErr := errors.New("report writer failed")
+	writer := failingInspectionWriter{err: writeErr}
+	if err := view.WriteEffective(writer); !errors.Is(err, writeErr) {
+		t.Fatalf("effective writer error = %v", err)
+	}
+	if err := view.WriteExplanation(writer, configkit.Keys("profiles", "mistral-small-3", "model")); !errors.Is(err, writeErr) {
+		t.Fatalf("explanation writer error = %v", err)
+	}
+}
+
+func TestConfigurationInspectionUsesCapturedSourcesWithoutProviderCalls(t *testing.T) {
+	source := &unreadableAfterConstructionFS{FS: fstest.MapFS{
+		"config/prompt.yaml": &fstest.MapFile{Data: []byte(capturedPromptDocument)},
+		"config/body.tmpl":   &fstest.MapFile{Data: []byte("hello")},
+	}}
+	inputs, err := promptkit.FilesystemInputs("inspection source", source, "config")
+	if err != nil {
+		t.Fatalf("select inputs: %v", err)
+	}
+	var modelCalls atomic.Int64
+	client := countingLLMClient{calls: &modelCalls}
+	endpoint, model := "https://example.invalid/v1", "offline-model"
+	engine, err := promptkit.NewEngine(promptkit.Config{Sources: promptkit.ConfigurationSources{
+		Underlays: []configkit.Underlay{{Inputs: inputs}, {Inputs: []configkit.Input{{Source: promptkit.ProfileSource("offline profile", map[string]promptkit.ProfileConfig{
+			"offline": {Endpoint: &endpoint, Model: &model},
+		})}}}},
+	}}, promptkit.WithLLMClient(client))
+	if err != nil {
+		t.Fatalf("construct engine: %v", err)
+	}
+	source.closed.Store(true)
+	view, err := engine.InspectConfiguration()
+	if err != nil {
+		t.Fatalf("inspect configuration: %v", err)
+	}
+	if _, found := view.Explain(configkit.Keys("prompts", "captured", "1", "messages").Index(0).Key("content_file")); !found {
+		t.Fatal("captured prompt content path was not inspectable")
+	}
+	var report bytes.Buffer
+	if err := view.WriteEffective(&report); err != nil || !strings.Contains(report.String(), "captured") {
+		t.Fatalf("write captured report = (%q, %v)", report.String(), err)
+	}
+	if source.reads.Load() != 0 || modelCalls.Load() != 0 {
+		t.Fatalf("inspection touched source or provider: reads=%d requests=%d", source.reads.Load(), modelCalls.Load())
+	}
+
+	const calls = 16
+	var wait sync.WaitGroup
+	errs := make(chan error, calls)
+	for index := 0; index < calls; index++ {
+		wait.Add(1)
+		go func(index int) {
+			defer wait.Done()
+			if index%2 == 0 {
+				_, err := engine.InspectConfiguration()
+				errs <- err
+				return
+			}
+			_, err := engine.Run(context.Background(), promptkit.RunRequest{PromptID: "captured", SessionID: "direct"})
+			errs <- err
+		}(index)
+	}
+	wait.Wait()
+	close(errs)
+	for err := range errs {
+		if err != nil {
+			t.Fatal(err)
+		}
+	}
+	if source.reads.Load() != 0 || modelCalls.Load() != calls/2 {
+		t.Fatalf("concurrent inspection/execution = source reads %d, model calls %d", source.reads.Load(), modelCalls.Load())
+	}
+}

configuration_sources.go

@@ -0,0 +1,83 @@
+package promptkit
+
+import (
+	"context"
+	"fmt"
+	"io/fs"
+	"os"
+	"path/filepath"
+
+	"gitea.maximumdirect.net/eric/ConfigKit"
+	"gitea.maximumdirect.net/eric/promptkit/internal/filecatalog"
+)
+
+// DirectoryInputs selects the YAML files beneath an explicitly chosen host
+// directory as one strict-composition group. The returned order is deterministic;
+// it does not assign precedence among those files. Discovery is recursive over
+// .yaml and .yml files. An unavailable root fails; an empty directory yields
+// no inputs. Imports are disabled unless callers enable them on the inputs.
+func DirectoryInputs(directory string) ([]configkit.Input, error) {
+	root, err := filepath.Abs(directory)
+	if err != nil {
+		return nil, fmt.Errorf("resolve configuration directory: %w", err)
+	}
+	info, err := os.Stat(root)
+	if err != nil {
+		return nil, fmt.Errorf("inspect configuration directory: %w", err)
+	}
+	if !info.IsDir() {
+		return nil, fmt.Errorf("configuration root is not a directory: %s", root)
+	}
+	root, err = filepath.EvalSymlinks(root)
+	if err != nil {
+		return nil, fmt.Errorf("resolve configuration directory: %w", err)
+	}
+	files, err := filecatalog.FindYAMLFiles(context.Background(), root)
+	if err != nil {
+		return nil, fmt.Errorf("discover configuration files: %w", err)
+	}
+	inputs := make([]configkit.Input, 0, len(files))
+	for _, file := range files {
+		inputs = append(inputs, configkit.Input{
+			Source:     configkit.File(file),
+			Filesystem: &configkit.FilesystemContext{Root: root},
+		})
+	}
+	return inputs, nil
+}
+
+// FilesystemInputs selects the YAML files beneath root in a caller-owned
+// filesystem as one strict-composition group. Discovery is recursive over
+// .yaml and .yml files, with deterministic ordering and no precedence among
+// files. The caller retains ownership of the filesystem; an unavailable root
+// fails and an empty directory yields no inputs. Imports remain disabled unless
+// callers enable them on inputs.
+func FilesystemInputs(label string, filesystem fs.FS, root string) ([]configkit.Input, error) {
+	if filesystem == nil {
+		return nil, fmt.Errorf("configuration filesystem is nil")
+	}
+	root = filecatalog.CleanFSRoot(root)
+	if !fs.ValidPath(root) {
+		return nil, fmt.Errorf("configuration root is not a valid filesystem path: %s", root)
+	}
+	info, err := fs.Stat(filesystem, root)
+	if err != nil {
+		return nil, fmt.Errorf("inspect configuration root: %w", err)
+	}
+	if !info.IsDir() {
+		return nil, fmt.Errorf("configuration root is not a directory: %s", root)
+	}
+	files, err := filecatalog.FindFSYAMLFiles(context.Background(), filesystem, root)
+	if err != nil {
+		return nil, fmt.Errorf("discover configuration files: %w", err)
+	}
+	namespace := configkit.NewFilesystem(label, filesystem)
+	inputs := make([]configkit.Input, 0, len(files))
+	for _, file := range files {
+		inputs = append(inputs, configkit.Input{
+			Source:     namespace.File(file),
+			Filesystem: &configkit.FilesystemContext{FS: &namespace, Root: root},
+		})
+	}
+	return inputs, nil
+}

configuration_sources_test.go

@@ -0,0 +1,83 @@
+package promptkit_test
+
+import (
+	"io/fs"
+	"os"
+	"path/filepath"
+	"testing"
+	"testing/fstest"
+
+	"gitea.maximumdirect.net/eric/ConfigKit"
+	"gitea.maximumdirect.net/eric/promptkit"
+)
+
+type sourceDocument struct {
+	First  string `yaml:"first"`
+	Second string `yaml:"second"`
+}
+
+func TestDirectoryInputsSelectsSortedFilesWithRootContext(t *testing.T) {
+	root := t.TempDir()
+	if err := os.Mkdir(filepath.Join(root, "nested"), 0o755); err != nil {
+		t.Fatal(err)
+	}
+	for name, data := range map[string]string{
+		"a.yaml": "first: one\n", "nested/b.yml": "second: two\n", "nested/body.md": "message",
+	} {
+		if err := os.WriteFile(filepath.Join(root, name), []byte(data), 0o600); err != nil {
+			t.Fatal(err)
+		}
+	}
+	inputs, err := promptkit.DirectoryInputs(root)
+	if err != nil || len(inputs) != 2 || inputs[0].Imports || inputs[1].Imports {
+		t.Fatalf("directory inputs: %+v, %v", inputs, err)
+	}
+	assertSourceInputs(t, inputs, "message")
+	if _, err := promptkit.DirectoryInputs(filepath.Join(root, "missing")); err == nil {
+		t.Fatal("missing selected directory succeeded")
+	}
+	if empty, err := promptkit.DirectoryInputs(t.TempDir()); err != nil || len(empty) != 0 {
+		t.Fatalf("empty directory: %+v, %v", empty, err)
+	}
+}
+
+func TestFilesystemInputsSelectsEmbeddedFilesWithRootContext(t *testing.T) {
+	files := fstest.MapFS{
+		"settings/a.yaml":         {Data: []byte("first: one\n")},
+		"settings/nested/b.yml":   {Data: []byte("second: two\n")},
+		"settings/nested/body.md": {Data: []byte("message")},
+	}
+	inputs, err := promptkit.FilesystemInputs("embedded", files, "settings")
+	if err != nil || len(inputs) != 2 || inputs[0].Imports || inputs[1].Imports {
+		t.Fatalf("filesystem inputs: %+v, %v", inputs, err)
+	}
+	assertSourceInputs(t, inputs, "message")
+	if _, err := promptkit.FilesystemInputs("embedded", files, "missing"); err == nil {
+		t.Fatal("missing selected root succeeded")
+	}
+}
+
+func assertSourceInputs(t *testing.T, inputs []configkit.Input, expected string) {
+	t.Helper()
+	result, err := configkit.LoadLayered(configkit.Input{Source: configkit.NoSource()}, configkit.LayeredOptions[sourceDocument]{
+		Underlays: []configkit.Underlay{{Inputs: inputs}},
+	})
+	if err != nil {
+		t.Fatal(err)
+	}
+	if result.Config.First != "one" || result.Config.Second != "two" {
+		t.Fatalf("configuration files did not compose: %+v", result.Config)
+	}
+	field, found := result.Metadata().Lookup(configkit.Keys("second"))
+	if !found || len(field.Origin.Locations) != 1 {
+		t.Fatalf("missing second-field origin: %+v", field)
+	}
+	context, found := result.SourceContext(field.Origin.Locations[0].SourceID)
+	if !found || context.BaseDir != "nested" {
+		t.Fatalf("unexpected rooted source context: %+v", context)
+	}
+	data, err := fs.ReadFile(context.FS, "nested/body.md")
+	if err != nil || string(data) != expected {
+		t.Fatalf("rooted resource read: %q, %v", data, err)
+	}
+}

construction_contract_test.go

@@ -0,0 +1,231 @@
+package promptkit_test
+
+import (
+	"context"
+	"errors"
+	"io"
+	"net/http"
+	"os"
+	"path/filepath"
+	"strings"
+	"testing"
+	"testing/fstest"
+
+	"gitea.maximumdirect.net/eric/ConfigKit"
+	"gitea.maximumdirect.net/eric/promptkit"
+)
+
+func TestProfileEnvironmentLookupAcceptsNonShellNames(t *testing.T) {
+	const name = "promptkit.test-api-key"
+	for _, test := range []struct {
+		name, value, direct, want string
+		unset, clear              bool
+	}{
+		{name: "set", value: " synthetic-key ", want: "Bearer synthetic-key"},
+		{name: "empty"},
+		{name: "whitespace", value: "  "},
+		{name: "unset", unset: true},
+		{name: "direct precedence", value: "synthetic-key", direct: "direct-key", want: "Bearer direct-key"},
+		{name: "explicit clear", value: "synthetic-key", clear: true},
+	} {
+		t.Run(test.name, func(t *testing.T) {
+			t.Setenv(name, test.value)
+			if test.unset {
+				if err := os.Unsetenv(name); err != nil {
+					t.Fatal(err)
+				}
+			}
+			cfg := simpleConfig("hello")
+			cfg.Sources.Underlays = []configkit.Underlay{{Inputs: []configkit.Input{*cfg.Sources.Main}}}
+			lowerName := name
+			cfg.Sources.Underlays = append(cfg.Sources.Underlays, configkit.Underlay{Inputs: []configkit.Input{{
+				Source: promptkit.ProfileSource("default credentials", map[string]promptkit.ProfileConfig{
+					"profile": {APIKeyEnv: &lowerName},
+				}),
+			}}})
+			env := " " + name + " "
+			if test.clear {
+				env = ""
+			}
+			cfg.Sources.Main = &configkit.Input{Source: promptkit.ProfileSource("credentials", map[string]promptkit.ProfileConfig{
+				"profile": {APIKeyEnv: &env},
+			})}
+			var calls int
+			var auth string
+			cfg.HTTPClient = &http.Client{Transport: roundTripFunc(func(request *http.Request) (*http.Response, error) {
+				calls++
+				auth = request.Header.Get("Authorization")
+				return &http.Response{StatusCode: http.StatusOK, Header: make(http.Header), Body: io.NopCloser(strings.NewReader(`{"choices":[{"message":{"content":"ok"}}]}`))}, nil
+			})}
+			engine, err := promptkit.NewEngine(cfg)
+			if err != nil {
+				t.Fatal(err)
+			}
+			_, err = engine.Run(context.Background(), promptkit.RunRequest{PromptID: "prompt", APIKey: test.direct})
+			if err != nil || calls != 1 || auth != test.want {
+				t.Fatalf("run: err=%v calls=%d authorization=%q, want %q", err, calls, auth, test.want)
+			}
+		})
+	}
+}
+
+func TestPublicConstructionWithLocalBackendAndProgrammaticProfile(t *testing.T) {
+	backendID, model := "workstation", "offline-model"
+	prompt := configkit.Input{Source: configkit.Mapping("prompt", map[string]any{
+		"prompts": map[string]any{"hello": map[string]any{"1": map[string]any{
+			"default_profile": "offline",
+			"messages":        []any{map[string]any{"role": "user", "content": "Hello"}},
+			"output":          map[string]any{"format": "text", "validation_mode": "none"},
+		}}},
+	})}
+	client := &fakeLLMClient{response: &promptkit.GenerateResponse{Content: "reply"}}
+	engine, err := promptkit.NewEngine(promptkit.Config{Sources: promptkit.ConfigurationSources{
+		Underlays: []configkit.Underlay{{Inputs: []configkit.Input{
+			{Source: promptkit.BackendSource("local backend", map[string]promptkit.BackendConfig{
+				backendID: promptkit.LocalBackend("http://localhost:8000/v1", 2),
+			})},
+			{Source: promptkit.ProfileSource("profile", map[string]promptkit.ProfileConfig{
+				"offline": {Backend: &backendID, Model: &model},
+			})},
+		}}},
+		Main: &prompt,
+	}}, promptkit.WithLLMClient(client))
+	if err != nil {
+		t.Fatalf("construct engine: %v", err)
+	}
+	result, err := engine.Run(context.Background(), promptkit.RunRequest{PromptID: "hello"})
+	if err != nil {
+		t.Fatalf("run prompt: %v", err)
+	}
+	if result.RawOutput != "reply" || result.SelectedBackendID != backendID || result.EffectiveModelParams.Model != model {
+		t.Fatalf("unexpected result: %+v", result)
+	}
+	if len(client.requests) != 1 || client.requests[0].Target.Endpoint != "http://localhost:8000/v1" {
+		t.Fatalf("unexpected model request: %+v", client.requests)
+	}
+}
+
+func TestPublicConstructionCombinesEmbeddedOperatorAndProgrammaticInputs(t *testing.T) {
+	embedded, err := promptkit.FilesystemInputs("embedded defaults", fstest.MapFS{
+		"config/default.yaml": &fstest.MapFile{Data: []byte(`
+profiles:
+  application:
+    endpoint: https://example.invalid/v1
+    model: default-model
+prompts:
+  hello:
+    "1":
+      default_profile: application
+      messages:
+        - role: user
+          content: Hello
+      output:
+        format: text
+        validation_mode: none
+`)},
+	}, "config")
+	if err != nil {
+		t.Fatalf("select embedded defaults: %v", err)
+	}
+	operatorDirectory := t.TempDir()
+	if err := os.WriteFile(filepath.Join(operatorDirectory, "override.yaml"), []byte("profiles:\n  application:\n    model: operator-model\n"), 0o644); err != nil {
+		t.Fatalf("write operator input: %v", err)
+	}
+	operator, err := promptkit.DirectoryInputs(operatorDirectory)
+	if err != nil {
+		t.Fatalf("select operator inputs: %v", err)
+	}
+	programmaticModel := "programmatic-model"
+	programmatic := configkit.Input{Source: promptkit.ProfileSource("programmatic settings", map[string]promptkit.ProfileConfig{
+		"application": {Model: &programmaticModel},
+	})}
+	for _, test := range []struct {
+		name  string
+		apply bool
+		want  string
+	}{
+		{name: "embedded", want: "default-model"},
+		{name: "operator", apply: true, want: "operator-model"},
+		{name: "programmatic", apply: true, want: "programmatic-model"},
+	} {
+		t.Run(test.name, func(t *testing.T) {
+			underlays := []configkit.Underlay{{Inputs: embedded}}
+			if test.apply {
+				underlays = append(underlays, configkit.Underlay{Inputs: operator})
+			}
+			if test.name == "programmatic" {
+				underlays = append(underlays, configkit.Underlay{Inputs: []configkit.Input{programmatic}})
+			}
+			engine, err := promptkit.NewEngine(promptkit.Config{Sources: promptkit.ConfigurationSources{Underlays: underlays}})
+			if err != nil {
+				t.Fatalf("construct engine: %v", err)
+			}
+			prepared, err := engine.Prepare(context.Background(), promptkit.RunRequest{PromptID: "hello"})
+			if err != nil {
+				t.Fatalf("prepare prompt: %v", err)
+			}
+			if prepared.EffectiveModelParams.Model != test.want {
+				t.Fatalf("model = %q, want %q", prepared.EffectiveModelParams.Model, test.want)
+			}
+		})
+	}
+}
+
+func TestPublicConstructionPreservesConfigKitLoadError(t *testing.T) {
+	engine, err := promptkit.NewEngine(promptkit.Config{Sources: promptkit.ConfigurationSources{Main: &configkit.Input{
+		Source: configkit.Mapping("invalid", map[string]any{"profiles": map[string]any{"broken": map[string]any{"unknown": true}}}),
+	}}})
+	var loadErr *configkit.LoadError
+	if engine != nil || !errors.Is(err, promptkit.ErrInvalidConfig) || !errors.As(err, &loadErr) {
+		t.Fatalf("construction = (%#v, %v), want invalid config preserving LoadError", engine, err)
+	}
+}
+
+func TestPublicConstructionRejectsSuppliedInvalidMainInput(t *testing.T) {
+	main := configkit.Input{}
+	engine, err := promptkit.NewEngine(promptkit.Config{Sources: promptkit.ConfigurationSources{Main: &main}})
+	if engine != nil || !errors.Is(err, promptkit.ErrInvalidConfig) {
+		t.Fatalf("construction = (%#v, %v), want invalid supplied main input", engine, err)
+	}
+}
+
+func TestPublicConstructionCanOverlayMaintainedBackend(t *testing.T) {
+	endpoint := "http://local-openrouter.example/v1"
+	engine, err := promptkit.NewEngine(promptkit.Config{Sources: promptkit.ConfigurationSources{
+		Underlays: []configkit.Underlay{{Inputs: []configkit.Input{{Source: promptkit.BackendSource("operator backend", map[string]promptkit.BackendConfig{
+			promptkit.BackendOpenRouter: {Endpoint: &endpoint},
+		})}}}},
+	}})
+	if err != nil {
+		t.Fatalf("construct engine with backend overlay: %v", err)
+	}
+	inspection, err := engine.InspectProfile(context.Background(), "mistral-small-3")
+	if err != nil {
+		t.Fatalf("inspect catalog profile: %v", err)
+	}
+	if inspection.EffectiveModelParams.Endpoint != endpoint {
+		t.Fatalf("effective endpoint = %q, want %q", inspection.EffectiveModelParams.Endpoint, endpoint)
+	}
+}
+
+func TestPreparationRejectsAmbiguousPromptVersion(t *testing.T) {
+	definition := func(content string) map[string]any {
+		return map[string]any{
+			"messages": []any{map[string]any{"role": "user", "content": content}},
+			"output":   map[string]any{"format": "text", "validation_mode": "none"},
+		}
+	}
+	engine, err := promptkit.NewEngine(promptkit.Config{Sources: promptkit.ConfigurationSources{
+		Main: &configkit.Input{Source: configkit.Mapping("versions", map[string]any{
+			"prompts": map[string]any{"hello": map[string]any{
+				"1": definition("first"), "2": definition("second"),
+			}},
+		})},
+	}})
+	if err != nil {
+		t.Fatalf("construct engine: %v", err)
+	}
+	if result, err := engine.Prepare(context.Background(), promptkit.RunRequest{PromptID: "hello"}); result != nil || !errors.Is(err, promptkit.ErrPromptLoad) {
+		t.Fatalf("ambiguous preparation = (%#v, %v), want ErrPromptLoad", result, err)
+	}
+}

consumer_test_helpers_test.go

@@ -0,0 +1,73 @@
+package promptkit_test
+
+import (
+	"context"
+	"fmt"
+	"net/http"
+	"sync/atomic"
+	"testing"
+
+	"gitea.maximumdirect.net/eric/ConfigKit"
+	"gitea.maximumdirect.net/eric/promptkit"
+)
+
+type fakeLLMClient struct {
+	response  *promptkit.GenerateResponse
+	responses []*promptkit.GenerateResponse
+	err       error
+	requests  []promptkit.GenerateRequest
+}
+
+func (f *fakeLLMClient) Generate(_ context.Context, request promptkit.GenerateRequest) (*promptkit.GenerateResponse, error) {
+	f.requests = append(f.requests, request)
+	if f.err != nil {
+		return nil, f.err
+	}
+	if len(f.responses) > 0 {
+		index := len(f.requests) - 1
+		if index >= len(f.responses) {
+			return nil, fmt.Errorf("no response configured for generation %d", index+1)
+		}
+		return f.responses[index], nil
+	}
+	return f.response, nil
+}
+
+type countingLLMClient struct{ calls *atomic.Int64 }
+
+func (client countingLLMClient) Generate(context.Context, promptkit.GenerateRequest) (*promptkit.GenerateResponse, error) {
+	if client.calls != nil {
+		client.calls.Add(1)
+	}
+	return &promptkit.GenerateResponse{Content: "ok"}, nil
+}
+
+type roundTripFunc func(*http.Request) (*http.Response, error)
+
+func (f roundTripFunc) RoundTrip(request *http.Request) (*http.Response, error) { return f(request) }
+
+// newSimpleEngine exercises the public constructor with a complete keyed
+// document. Tests that need layering or resources select their own inputs.
+func newSimpleEngine(t *testing.T, content string, options ...promptkit.Option) *promptkit.Engine {
+	t.Helper()
+	engine, err := promptkit.NewEngine(simpleConfig(content), options...)
+	if err != nil {
+		t.Fatalf("construct consumer test engine: %v", err)
+	}
+	return engine
+}
+
+func simpleConfig(content string) promptkit.Config {
+	return promptkit.Config{Sources: promptkit.ConfigurationSources{
+		Main: &configkit.Input{Source: configkit.Mapping("consumer test", map[string]any{
+			"profiles": map[string]any{"profile": map[string]any{
+				"endpoint": "http://example.test/v1", "model": "model",
+			}},
+			"prompts": map[string]any{"prompt": map[string]any{"1": map[string]any{
+				"default_profile": "profile",
+				"messages":        []any{map[string]any{"role": "user", "content": content}},
+				"output":          map[string]any{"format": "text", "validation_mode": "none"},
+			}}},
+		})},
+	}}
+}

doc.go

@@ -1,23 +1,26 @@
 // Package promptkit provides an embeddable engine for preparing and executing
 // prompt-defined LLM workflows.
 //
-// Applications construct an [Engine] with [NewEngine], select filesystem or
-// in-memory sources and optional engine-scoped [Backend] registrations, and
-// call [Engine.InspectPrompt], [Engine.InspectProfile], [Engine.Prepare],
+// Applications construct an [Engine] with [NewEngine], select ConfigKit
+// sources for prompts, profiles, and backends, and
+// call [Engine.InspectConfiguration], [Engine.InspectPrompt],
+// [Engine.InspectProfile], [Engine.Prepare],
 // [Engine.PrepareExecution], [Engine.Run], or [Engine.RunPrepared]. Concrete
 // registries, repositories, validators, and the built-in OpenAI-compatible
 // client remain internal implementation details.
 //
 // # Concurrency and ownership
 //
-// An Engine supports concurrent InspectPrompt, InspectProfile, Prepare,
+// An Engine supports concurrent InspectConfiguration, InspectPrompt,
+// InspectProfile, Prepare,
 // PrepareExecution, Run, and RunPrepared calls. Engine-local backend policies
 // bound admitted Run and RunPrepared calls and model generations where
 // configured, while different backend pools and unlimited backends continue
 // independently. An injected [LLMClient] or [ArtifactReader] can therefore
 // still receive concurrent calls and must be safe for that use.
 //
-// NewEngine copies in-memory profiles and backend definitions. Prepare,
+// ConfigKit captures the selected configuration when NewEngine constructs an
+// Engine. Prepare,
 // PrepareExecution, and Run copy request maps, slices, pointer values, and
 // JSON-compatible extra parameters before using them. InspectPrompt and
 // InspectProfile return copied inspection values. Returned values and values
@@ -52,8 +55,9 @@
 // used by those values.
 //
 // Construction, inspection, handle, and error values, including [Config],
-// [Backend], [RunRequest], [ArtifactRef], [ExecutionTargetOverride], [Profile],
-// [OpenAICompatibleProfileConfig], [ProfileInspection],
+// [ConfigurationSources], [ConfigurationInspection], [BackendConfig],
+// [ProfileConfig], [RunRequest],
+// [ArtifactRef], [ExecutionTargetOverride], [ProfileInspection],
 // [PromptInputDefinition], [PromptInspection], [PreparedExecution],
 // [CapacityError], [GenerationError], [RetryExhaustedError], and
 // [ExecutionEvent], do not have stable JSON

docs/adr/0001-configuration-boundary.md

@@ -0,0 +1,60 @@
+# 0001: Configuration Ownership At The ConfigKit Handoff
+
+## Status
+
+Accepted.
+
+## Date
+
+2026-09-30
+
+## Context
+
+PromptKit is adopting ConfigKit to standardize configuration semantics and
+simplify its loading machinery. Configuration includes prompts, profiles, and
+backend definitions contributed by maintained catalogs and consuming applications.
+ConfigKit supplies loading, composition, precedence, inheritance, and inspection
+capabilities. PromptKit supplies LLM-specific interpretation and execution.
+
+A clear handoff assigns each library responsibility for the configuration it
+owns and keeps validation aligned with the values an application actually uses.
+
+## Decision
+
+ConfigKit owns configuration processing up to the handoff of the final effective
+configuration. PromptKit takes ownership at that handoff and applies its domain
+interpretation and validation to the final configuration.
+
+The handoff includes effective presence/null information and resource context
+supplied by ConfigKit. PromptKit uses this information to interpret effective
+settings and resolve referenced resources.
+
+PromptKit passes through ConfigKit's inspection capabilities for explicit
+operator use. Configuration history and source explanations serve that
+inspection purpose; domain validation operates on the final effective values.
+
+This boundary applies uniformly to application configuration and maintained
+catalog configuration, including backend definitions.
+
+## Alternatives Considered
+
+- **Independent source or catalog preflight validation:** preserves checks on
+  individual contributions, but duplicates configuration processing and evaluates
+  values that may be replaced before handoff. Raw-source and intermediate-state
+  validation are outside PromptKit's scope, including equivalent test-only checks.
+- **History-based source auditing:** can identify overwritten contributions, but
+  couples domain enforcement to configuration history. Historical inspection is
+  an operator capability rather than a validation mechanism.
+
+## Consequences
+
+PromptKit's configuration logic and tests focus on the final effective values,
+their domain meaning, and resulting execution behavior. ConfigKit owns failures
+arising during its processing, which PromptKit preserves through its error
+boundary. Catalog maintainers own their repositories' publishing checks.
+
+The adoption work routes backend configuration through the same handoff and
+retires PromptKit's source-level and intermediate-configuration validation.
+Effective resource interpretation and explicit operator inspection remain
+supported. This concentrates configuration semantics in ConfigKit and reduces
+duplicated machinery and maintenance in PromptKit.

docs/consumers/pkg-promptkit.md

@@ -21,54 +21,114 @@ programs.
 
 ## Construct An Engine
 
-Create an engine with
-[`NewEngine`](../../engine.go). A directory-backed setup supplies a prompt
-directory and may supply profile and schema directories:
+Create an engine with [`NewEngine`](../../engine.go). Select each directory
+explicitly and place its inputs in an ordered ConfigKit underlay. A group
+strictly composes its files; later groups can overlay earlier ones:
 
 ```go
+promptInputs, err := promptkit.DirectoryInputs("prompts")
+if err != nil { return err }
+profileInputs, err := promptkit.DirectoryInputs("profiles")
+if err != nil { return err }
 engine, err := promptkit.NewEngine(promptkit.Config{
-	PromptDir:  "prompts",
-	ProfileDir: "profiles",
-	SchemaDir:  "schemas",
+	Sources: promptkit.ConfigurationSources{Underlays: []configkit.Underlay{
+		{Inputs: promptInputs},
+		{Inputs: profileInputs},
+	}},
+	SchemaDir: "schemas",
 })
 ```
 
-Options support single-file or `fs.FS` sources, in-memory profiles,
-engine-scoped backends, and injected artifact or model clients. Consult the
-[constructor and option GoDoc](../../engine.go) for composition, precedence,
-validation, and default transport behavior. Source discovery, format
-validation, and profile precedence are defined by the
-[framework format reference](../formats.md).
+For a single highest-priority document, set `Sources.Main` to a
+`*configkit.Input`; omit it for ordinary layered construction. A single file
+can use `configkit.File` directly. `ProfileSource`, `BackendSource`, and raw
+`configkit.Mapping` supply programmatic definitions. Schema and runtime
+collaborator options remain available. Construction validates the final
+effective configuration and captures referenced prompt content; construct a
+new engine to observe configuration edits. See the [constructor GoDoc](../../engine.go)
+for the exact public contract and the [framework format reference](../formats.md)
+for definition fields.
 
 ## Supply Embedded Application Defaults
 
-Use `WithFallbackProfileFS` when an application packages profile definitions
-that should apply unless an operator provides an ordinary configured profile
-with the same ID. For example, an application can embed its defaults while
-continuing to use `ProfileDir` for operator overrides:
+Use `FilesystemInputs` for embedded defaults and `DirectoryInputs` for an
+explicitly chosen operator directory. A later programmatic group can override
+both. No directory name has built-in precedence:
 
 ```go
-//go:embed profiles/*.yaml
-var applicationProfiles embed.FS
-
-engine, err := promptkit.NewEngine(promptkit.Config{
-	PromptDir:  "prompts",
-	ProfileDir: operatorProfileDir,
-},
-	promptkit.WithFallbackProfileFS(applicationProfiles, "profiles"),
-)
+defaults, err := promptkit.FilesystemInputs("embedded defaults", applicationFS, "config")
+if err != nil { return err }
+operator, err := promptkit.DirectoryInputs(operatorDirectory)
+if err != nil { return err }
+profile := promptkit.ProfileSource("application choices", map[string]promptkit.ProfileConfig{
+	"summary": {Model: &selectedModel},
+})
+engine, err := promptkit.NewEngine(promptkit.Config{Sources: promptkit.ConfigurationSources{
+	Underlays: []configkit.Underlay{
+		{Inputs: defaults},
+		{Inputs: operator},
+		{Inputs: []configkit.Input{{Source: profile}}},
+	},
+}})
 ```
 
-Keep application-owned profile IDs and definitions in the embedded source.
-Use the ordinary configured profile source for operator overrides. Leave
-`operatorProfileDir` empty when the operator did not configure an override
-directory; a non-empty path names an authoritative higher-precedence source,
-so an unavailable or unreadable directory is an error rather than a reason to
-fall back. The
-[framework format reference](../formats.md#source-and-profile-precedence)
-owns the exact profile format and lookup order; the
-[`WithFallbackProfileFS` GoDoc](../../engine.go) owns its option contract and
-validation rules.
+Only add the operator group when the application selects that directory; an
+explicitly selected missing or unreadable root is an error. Each helper finds
+`.yaml` and `.yml` files recursively and disables imports by default. The
+caller may enable imports on individual inputs. A nil `Sources.Main` is an
+empty main source, not another directory lookup.
+
+For a programmatic document with explicit null or a prompt definition, use a
+labeled mapping as an input. A mapping owns a snapshot of supported values:
+
+```go
+document := configkit.Mapping("application configuration", map[string]any{
+	"profiles": map[string]any{
+		"local-summary": map[string]any{
+			"backend": "local", "model": "example-model",
+			"temperature": nil, // Suppress an inherited provider control.
+		},
+	},
+})
+input := configkit.Input{Source: document}
+// Add input to a later underlay, or set Sources.Main = &input.
+```
+
+`ProfileSource` and `BackendSource` are smaller typed conveniences when null
+is not needed. A caller underlay can overlay catalog backend fields just as it
+can overlay profiles; there is no registration-only backend namespace.
+
+When configuration or message files change, build and validate a new engine,
+then switch the application to that engine for subsequent work. Existing
+engines and prepared handles retain their captured definitions; schema and
+request artifact resources still follow their runtime lifecycle. Inspection
+does not watch or reload sources automatically.
+
+## Inspect The Captured Configuration
+
+Use [`Engine.InspectConfiguration`](../../configuration_inspection.go) for an
+operator-selected report of effective configuration, source descriptions,
+diagnostics, and path history. For a literal ID containing a slash, construct
+the semantic path with `configkit.Keys`:
+
+```go
+view, err := engine.InspectConfiguration()
+if err != nil { return err }
+path := configkit.Keys("profiles", "team/summary", "model")
+explanation, found := view.Explain(path)
+if found && explanation.Effective.Redacted {
+	// Apply the application's disclosure policy before sharing the report.
+}
+```
+
+`WriteEffective` and `WriteExplanation` produce ConfigKit-redacted reports;
+the application decides whether those reports may be disclosed. Credential-
+shaped provider keys are redacted, but arbitrary prompt and provider content
+is not necessarily safe to share. Inspection uses the engine's captured result
+and does not reopen sources or resolve credentials. `InspectProfile` instead
+shows backend-completed execution settings for one profile, and `Prepare` or
+`PreparedExecution.Details` shows request-specific rendered messages, inputs,
+and validation resources. None of those views is a substitute for the others.
 
 ## Inspect A Prompt Before Preparation
 
@@ -268,8 +328,8 @@ result, err := engine.Run(ctx, request)
 
 These messages are already rendered: Promptkit does not template or resolve
 files in them, and they can contain sensitive model output or application
-feedback. Promptkit remains stateless; every `Run` call re-resolves its current
-sources and the application owns any semantic retry budget. When a
+feedback. Every `Run` call uses the engine's captured configuration; the
+application owns any semantic retry budget. When a
 pre-execution equality check is required, use `PrepareExecution` and compare
 its opaque rendered-prompt hash before invoking `RunPrepared`.
 
@@ -282,12 +342,44 @@ replace execution settings or the complete output contract.
 The [public value GoDoc](../../types.go) defines nil, empty, zero, replacement,
 copy, and credential behavior. The
 [framework format reference](../formats.md) defines how those request values
-interact with prompt definitions, file-backed and application fallback
-profiles, built-ins, schemas, and framework defaults.
+interact with prompt definitions, layered profiles, built-ins, schemas, and
+framework defaults.
 
-For programmatic profiles,
-[`OpenAICompatibleProfile`](../../profiles.go) converts ordinary
-OpenAI-compatible settings into a value accepted by `WithProfiles`.
+For programmatic profiles, use [`ProfileSource`](../../profiles.go) with keyed
+`ProfileConfig` values. Nil fields are omitted; pointers preserve explicit
+zero, false, and blank values. Raw `configkit.Mapping` expresses explicit null.
+
+### Migrate From The Previous Configuration API
+
+Replace `Config.PromptDir` and `Config.ProfileDir` with selected ConfigKit
+inputs in `Config.Sources`. The removed `WithPromptFS`, `WithPromptFile`,
+`WithProfileFS`, `WithProfileFile`, `WithFallbackProfileFS`, `WithProfiles`,
+and `WithBackend` options have no compatibility wrappers. Use
+`DirectoryInputs` or `FilesystemInputs` for a strict-composition file group,
+ConfigKit file inputs for individual files, and `ProfileSource`,
+`BackendSource`, or `configkit.Mapping` for programmatic values. Backend IDs
+are keys in configuration, not registrations. Choose caller underlays in
+fallback-to-operator-to-programmatic order; use `Sources.Main` for one final
+highest-priority input.
+
+Move embedded `id` and `version` fields into keyed `profiles` and `prompts`
+maps; convert `base_profile` to ConfigKit `extends`. IDs and references are
+exact literal keys, without trimming. A supplied zero, false, or empty string
+is now distinguishable from omission; null can clear or suppress an inherited
+field according to the [field table](../formats.md#defaults-and-overrides).
+Maps merge recursively across inheritance and layers. `{}` does not clear an
+inherited map: use null to clear the whole map. At request time, a literal
+`extra_params["extends"]` is ordinary provider data, not an inheritance
+instruction; a nonempty request ExtraParams map replaces configured params.
+Changing a model or backend does not clear unrelated explicit fields, though
+backend-derived defaults are applied after inheritance to the final backend.
+
+Invalid final definitions, including unused ones, now fail `NewEngine`; only
+request-dependent failures remain at preparation or execution. Prompt text
+and static templates are captured at construction, not automatically reloaded
+between runs. Replace the engine to pick up changed definitions or message
+files. The [format reference](../formats.md) owns exact field and presence
+rules; the maintained examples show complete runnable workflows.
 
 ### Choose A Profile Ownership Model
 
@@ -319,18 +411,19 @@ the application ID while inheriting the built-in target. The child can override
 only the setting it owns:
 
 ```go
-promptkit.WithProfiles(promptkit.Profile{
-	ID:              "weather-light",
-	BaseProfileID:   "promptkit-openrouter-standard",
-	ReasoningEffort: "high",
+profile := promptkit.ProfileSource("application profiles", map[string]promptkit.ProfileConfig{
+	"weather-light": {
+		Extends: &standardID,
+		ReasoningEffort: &high,
+	},
 })
 ```
 
-Select `weather-light` in a prompt or `RunRequest.ProfileID`; it remains the
-reported selected profile. See the [profile inheritance format
-reference](../formats.md#profile-inheritance) and the
-[`Profile` GoDoc](../../types.go) for exact lookup, merging, and validation
-behavior. If the base is an external profile, apply the volatility guidance
+Place `profile` in a ConfigKit underlay, with `standardID` set to
+`"promptkit-openrouter-standard"` and `high` to `"high"`. Select
+`weather-light` in a prompt or `RunRequest.ProfileID`; it remains the
+reported selected profile. Definition IDs and inheritance references are exact
+keys. If the base is an external profile, apply the volatility guidance
 above when deciding whether to use an application-owned complete definition
 instead.
 
@@ -355,9 +448,8 @@ if prepared.SelectedBackendID != promptkit.BackendRakestrawHome {
 }
 ```
 
-Do not register `rakestrawhome` manually. When adopting this built-in, remove
-an existing `WithBackend` registration with that exact ID; retaining it causes
-the intentional duplicate-ID configuration error. Direct request credentials
+The maintained catalog supplies this backend, and callers may overlay its
+effective configuration through a later ConfigKit source. Direct request credentials
 and runtime endpoint overrides remain supported under their ordinary GoDoc and
 format contracts.
 
@@ -424,19 +516,15 @@ Choose the smallest configuration that fits how the endpoint will be reused.
 
 #### Use An Endpoint-Only Profile
 
-Put the endpoint directly on an in-memory profile when only that profile needs
+Put the endpoint directly on a programmatic profile when only that profile needs
 it and shared backend identity or capacity policy is unnecessary:
 
 ```go
-engine, err := promptkit.NewEngine(promptkit.Config{
-	PromptDir: "prompts",
-},
-	promptkit.WithProfiles(promptkit.Profile{
-		ID:       "local-summary",
-		Endpoint: "http://localhost:8000/v1",
-		Model:    "example-model",
-	}),
-)
+endpoint, model := "http://localhost:8000/v1", "example-model"
+profile := promptkit.ProfileSource("local profile", map[string]promptkit.ProfileConfig{
+	"local-summary": {Endpoint: &endpoint, Model: &model},
+})
+// Add configkit.Input{Source: profile} to a caller underlay.
 ```
 
 Endpoint-only profiles have an empty backend ID and remain unrestricted by
@@ -448,59 +536,44 @@ Use `LocalBackend` when profiles should share the conventional `local`
 identity, endpoint, and concurrency limit:
 
 ```go
-engine, err := promptkit.NewEngine(promptkit.Config{
-	PromptDir: "prompts",
-},
-	promptkit.WithBackend(
-		promptkit.LocalBackend("http://localhost:8000/v1", 2),
-	),
-	promptkit.WithProfiles(promptkit.Profile{
-		ID:        "local-summary",
-		BackendID: promptkit.BackendLocal,
-		Model:     "example-model",
-	}),
-)
+backendID, model := promptkit.BackendLocal, "example-model"
+backend := promptkit.BackendSource("local backend", map[string]promptkit.BackendConfig{
+	backendID: promptkit.LocalBackend("http://localhost:8000/v1", 2),
+})
+profile := promptkit.ProfileSource("local profile", map[string]promptkit.ProfileConfig{
+	"local-summary": {Backend: &backendID, Model: &model},
+})
+// Add both sources as inputs in a caller underlay.
 ```
 
-The helper is explicit: it does not pre-register a backend or read environment
-variables. Supplying a positive limit leaves queue capacity omitted, so normal
-backend registration selects the existing default waiting capacity of 1024.
-The returned value still enters the engine through `WithBackend`.
+The helper does not choose an ID or read environment variables. A positive
+concurrency limit with omitted queue capacity selects the default waiting
+capacity of 1024.
 
 #### Configure A Complete Backend
 
-Use a keyed `Backend` value for authentication, extra request parameters, an
+Use a keyed `BackendConfig` value for authentication, extra request parameters, an
 explicit queue capacity, a custom ID, or multiple local endpoints:
 
 ```go
-noWaiting := 0
-engine, err := promptkit.NewEngine(promptkit.Config{
-	PromptDir: "prompts",
-},
-	promptkit.WithBackend(promptkit.Backend{
-		ID:               "local-gpu",
-		Endpoint:         "http://gpu-host:8000/v1",
-		APIKeyEnv:        "LOCAL_GPU_API_KEY",
-		ExtraParams:      map[string]any{"provider_option": "enabled"},
-		ConcurrencyLimit: 2,
-		QueueCapacity:    &noWaiting,
-	}),
-	promptkit.WithProfiles(promptkit.Profile{
-		ID:        "gpu-summary",
-		BackendID: "local-gpu",
-		Model:     "example-model",
-	}),
-)
+endpoint, keyName, limit, noWaiting := "http://gpu-host:8000/v1", "LOCAL_GPU_API_KEY", 2, 0
+backend := promptkit.BackendSource("GPU backend", map[string]promptkit.BackendConfig{
+	"local-gpu": {
+		Endpoint: &endpoint, APIKeyEnv: &keyName,
+		ConcurrencyLimit: &limit, QueueCapacity: &noWaiting,
+		ExtraParams: map[string]any{"provider_option": "enabled"},
+	},
+})
 ```
 
-Use distinct custom IDs when registering multiple local endpoints.
-Registrations belong to one engine and custom IDs cannot replace built-ins.
-The [`Backend`, `LocalBackend`, and `WithBackend` GoDoc](../../backends.go)
-defines exact construction, validation, copying, uniqueness, concurrency, and
-request-default behavior.
+Place `backend` in a caller underlay and select `"local-gpu"` from a
+`ProfileConfig.Backend` pointer or a keyed file profile. All backend
+contributions use the same ConfigKit layering rules, including overlays of
+maintained definitions. The [`BackendConfig` and `LocalBackend` GoDoc](../../backends.go)
+defines exact omission and construction behavior.
 
-Both file-backed and in-memory profiles select a registration through
-`backend` or `Profile.BackendID`. Profile and request endpoint overrides retain
+Both file-backed and programmatic profiles select a backend through
+`backend` or `ProfileConfig.Backend`. Profile and request endpoint overrides retain
 that routing and capacity identity. `PreparedRun.SelectedBackendID`,
 `RunResult.SelectedBackendID`, and the effective `ExecutionTarget.BackendID`
 expose it to consumers and injected model clients. Endpoint-only profiles
@@ -508,7 +581,7 @@ remain supported and expose an empty backend ID.
 
 ### Limit Backend Concurrency
 
-Set `Backend.ConcurrencyLimit` when a backend needs protection from too many
+Set `BackendConfig.ConcurrencyLimit` when a backend needs protection from too many
 simultaneous model calls. Leaving `QueueCapacity` nil, as in the local-backend
 example above, selects the default waiting capacity of 1024.
 
@@ -517,24 +590,23 @@ zero:
 
 ```go
 noWaiting := 0
-backend := promptkit.Backend{
-	ID:               "local-gpu",
-	Endpoint:         "http://gpu-host:8000/v1",
-	ConcurrencyLimit: 2,
-	QueueCapacity:    &noWaiting,
+backend := promptkit.BackendConfig{
+	Endpoint: &endpoint,
+	ConcurrencyLimit: &limit,
+	QueueCapacity: &noWaiting,
 }
 ```
 
-The pointer distinguishes an explicit zero from omission. Keep using keyed
-`Backend` literals so additive configuration fields remain source-compatible.
+The pointer distinguishes an explicit zero from omission. Use keyed
+`BackendConfig` literals inside `BackendSource` for programmatic definitions.
 Capacity belongs to one engine and the selected backend ID; endpoint-only
 profiles and custom backends without a configured limit remain unrestricted.
 Exact validation, defaulting, ownership, and concurrency semantics belong to
-the [`Backend` GoDoc](../../backends.go).
+the [`BackendConfig` GoDoc](../../backends.go).
 
 ## Credentials
 
-File-backed profiles name an environment variable; in-memory profiles can
+File-backed and programmatic profiles can name an environment variable or
 require a direct request key. Direct keys are request-scoped and are excluded
 from supported JSON values and the package's `String` and `GoString`
 summaries. The exact precedence and redaction guarantees belong to
@@ -568,12 +640,13 @@ the application policy that motivated the injection.
 
 Use `errors.Is` with the
 [public error sentinels and operation GoDoc](../../engine.go). The declarations
-distinguish invalid construction, invalid requests, absent sources,
-source-loading failures, collaborator failures, and operational validation
+distinguish invalid construction, invalid requests, absent selections,
+collaborator failures, and operational validation
 failures. Specific request conditions may also match the broader
 `ErrInvalidRequest`, and injected collaborator identities are preserved where
-documented. Invalid or duplicate backend registrations match
-`ErrInvalidConfig`; selecting an unknown backend matches `ErrProfileLoad`.
+documented. Invalid effective definitions, including unknown backend
+references, match `ErrInvalidConfig` during construction. ConfigKit load
+errors remain available through `errors.As`.
 
 When a limited backend has admitted all active and waiting calls, handle
 `ErrCapacityExceeded` separately from request errors and provider failures:

docs/development.md

@@ -1,9 +1,7 @@
 # Development
 
-This is the contributor entry point for Promptkit, a reusable Go library. All
-contributors must read the
-[architecture policy](policy/architecture.md) before making changes. Agents must
-also follow the [agent policy](policy/agents.md) before recommendations or work.
+This is the contributor entry point for Promptkit, a reusable Go library.
+Use the Policy Reading Guide below to select policies applicable to the task.
 
 ## Initial Orientation
 
@@ -16,18 +14,27 @@ Before starting work:
 4. keep documentation limited to implemented behavior unless an accepted
    decision or temporary roadmap explicitly owns future work.
 
-Start with:
+## Policy Reading Guide
 
-- the [architecture policy](policy/architecture.md) for library boundaries,
-  dependency direction, invariants, and non-goals;
-- the [internal component overview](internal/overview.md) for the current
-  package and component inventory;
-- the [documentation policy](policy/documentation.md) before changing
-  documentation;
-- the [testing policy](policy/testing.md) before adding, rewriting, or deleting
-  tests; and
-- the [release policy](policy/release.md) and [release procedure](release.md)
-  for version and publication work.
+| Policy | Read before… |
+| --- | --- |
+| [Policy set provenance](policy/meta.md) | Adopting policies, checking upstream revisions, or updating the adopted policy set. |
+| [Agents](policy/agents.md) | Recommending, planning, or implementing repository changes. |
+| [Architecture](policy/architecture.md) | Planning or changing library code or its structure. |
+| [Testing](policy/testing.md) | Selecting validation for code changes, or adding, changing, removing, or evaluating tests. |
+| [Documentation](policy/documentation.md) | Writing, revising, or reorganizing documentation. |
+| [OSS](policy/oss.md) | Adding or updating dependencies or incorporated third-party material, or changing licensing or attribution. |
+| [Release](policy/release.md) | Preparing or publishing a release, changing release procedures, or making versioning and compatibility decisions. |
+
+- Read applicable policies before making decisions they govern; multiple policies
+  may apply.
+- Select policies using the task triggers above. Follow cross-references to
+  relevant sections when needed to resolve a concrete question.
+- Reuse policies already available in context; reread when changed or no longer
+  available.
+- Expand reading when the task's scope expands.
+- When revising a policy itself, read that policy and any provisions elsewhere
+  affected by the revision.
 
 ## Task-Specific Reading Guide
 

docs/formats.md

@@ -2,394 +2,309 @@
 
 ## Purpose
 
-This document is the canonical contract for Promptkit prompt-definition,
-profile, and schema files. The [Go package consumer guide](consumers/pkg-promptkit.md)
-explains how to select these sources and invoke the engine. The
+This is the canonical reference for Promptkit's backend, profile, prompt, and
+schema definitions. The [Go consumer guide](consumers/pkg-promptkit.md) shows
+how to select sources and use an engine; the
 [OpenAI-compatible integration contract](integrations/openai-compatible-chat.md)
-owns the resulting outbound wire behavior.
+owns outbound wire behavior. [ConfigKit](https://gitea.maximumdirect.net/eric/ConfigKit)
+owns the generic YAML grammar, imports, layering, inheritance, and diagnostics.
+This reference describes what Promptkit does with the final effective values.
 
-Prompt and profile sources recursively discover files ending in `.yaml` or
-`.yml`. Each prompt-definition and profile file contains exactly one YAML
-document; comments and trailing whitespace are allowed. YAML decoding is
-strict: unknown fields are errors for the selected definition. Definitions are
-selected by their YAML `id`, not their file name or directory.
+A configuration document has keyed top-level `backends`, `profiles`, and
+`prompts` mappings. Their keys are literal IDs, not filename-derived identities.
+Prompt versions are a second keyed mapping. Keys and references must be
+nonblank and remain exact: Promptkit does not trim or re-key them. Old embedded
+`id`, `version`, and `base_profile` fields are invalid. Unknown fields are
+errors.
+
+```yaml
+backends:
+  local:
+    endpoint: http://localhost:8000/v1
+    concurrency_limit: 2
+profiles:
+  local-summary:
+    backend: local
+    model: example-model
+prompts:
+  meeting.summary:
+    "1.0.0":
+      default_profile: local-summary
+      messages:
+        - role: user
+          content: Summarize this note.
+      output:
+        format: text
+        validation_mode: none
+```
+
+Every effective backend, profile, and prompt definition is validated when
+`NewEngine` constructs the engine, even if it is never selected. A profile may
+be partial: an endpoint and model need only be complete after request overrides
+are applied. A prompt's default profile similarly need not be runnable without
+an overriding request. Missing request data, artifacts, schemas, credentials,
+and provider work remain runtime concerns.
+
+The engine captures effective definitions, referenced message-file contents,
+and static template syntax at construction. It does not reread configuration or
+message files on ordinary runs; construct a new engine to observe edits.
+Schema and request artifact reads still happen during preparation. Use
+`InspectConfiguration` for an explicit effective-configuration or provenance
+report, `InspectProfile` for backend-completed profile settings, and preparation
+for request-specific rendered details.
 
 ## Prompt Definitions
 
-A prompt definition describes inputs, Go-template messages, an optional
-default profile, and an output contract.
+The `prompts` mapping selects a literal prompt ID, then a string version key:
 
 ```yaml
-id: meeting.summary
-version: "1.0.0"
-default_profile: local-summary
-description: Summarize a synthetic meeting note.
-session_id: '{{.session}}'
-inputs:
-  - name: note
-    required: true
-    content_type: text/plain
-    description: Meeting note to summarize.
-messages:
-  - role: system
-    content: Return a concise summary.
-    cache_control:
-      type: ephemeral
-      ttl: 1h
-  - role: user
-    content_file: ./summary.user.md
-output:
-  format: markdown
-  validation_mode: basic
-  repair_attempts: 0
+prompts:
+  meeting.summary:
+    "1.0.0":
+      default_profile: local-summary
+      description: Summarize a synthetic meeting note.
+      session_id: '{{.session}}'
+      inputs:
+        - name: note
+          required: true
+          content_type: text/plain
+          description: Meeting note to summarize.
+      messages:
+        - role: system
+          content: Return a concise summary.
+          cache_control:
+            type: ephemeral
+            ttl: 1h
+        - role: user
+          content_file: ./summary.user.md
+      output:
+        format: markdown
+        validation_mode: basic
+        repair_attempts: 0
 ```
 
-| Field | Required | Meaning |
-| --- | --- | --- |
-| `id` | yes | Non-empty prompt identifier used by `RunRequest.PromptID`. |
-| `version` | yes | Non-empty version selected by an optional `RunRequest.PromptVersion`. |
-| `default_profile` | no | Non-empty profile ID used when the request omits `ProfileID`. |
-| `description` | no | Human-readable description. |
-| `session_id` | no | Go template rendered from request variables and input helpers. |
-| `inputs` | no | Declared input metadata. |
-| `messages` | yes | One or more chat-message templates. |
-| `output` | yes | Output format and validation settings. |
-
-When a request omits a version, the selected prompt ID must identify exactly
-one definition. When it supplies a version, the ID and version pair must be
-unique.
-
-Exact prompt inspection uses this same configured source, strict decoding,
-referenced content-file resolution, and ID/version selection. It reports the
-selected definition's declared metadata without changing the prompt format or
-executing the definition.
+`messages` must be nonempty and `output` must be a valid mapping. Optional
+`default_profile`, `description`, `session_id`, `inputs`, and cache-control
+fields may be absent or cleared with null where appropriate. A null whole
+definition, required role, output format, or validation mode is invalid.
+`required` and `repair_attempts` default to false and zero, respectively, and
+are not nullable. A request that omits a prompt version succeeds only if that
+prompt ID has exactly one effective version. `InspectPrompt` selects from the
+same captured definitions without rendering or resolving a profile.
 
 ### Inputs
 
-Each `inputs` item has these fields:
-
-| Field | Required | Meaning |
-| --- | --- | --- |
-| `name` | yes | Non-empty name used by the request input map and `input` template helper. Names must be unique. |
-| `required` | no | When true, preparation fails if the request omits the input. The default is false. |
-| `content_type` | no | Expected media-type metadata. |
-| `description` | no | Human-readable input description. |
-
-Requests supply inputs as inline or file-backed `ArtifactRef` values. Declared
-required inputs must be present. A template reference also requires the named
-input to exist, whether or not it was declared. Extra request inputs are
-allowed.
+Each `inputs` item may contain `name`, `required`, `content_type`, and
+`description`. `name` is required, nonblank, and unique within the prompt.
+Omitted `required` means false. Null `inputs` means no declarations. Requests
+supply inline or file-backed `ArtifactRef` values; declared required inputs
+must be present. A template reference also needs its named input, even when
+undeclared. Extra request inputs are allowed.
 
 ### Messages And Templates
 
-Each message has a `role` that Promptkit trims and lowercases. It must then be
-exactly one of `developer`, `system`, `user`, or `assistant`; blank, custom,
-`tool`, and `function` roles are invalid. This intentionally tightens the
-previous nonblank-string rule. Consumers migrating to the next minor release
-must update any nonstandard prompt-definition roles before upgrading.
+Each message needs a role and exactly one nonnull `content` or `content_file`.
+An explicitly empty inline `content` is valid. Null clears either content
+selection. Roles are trimmed and lowercased, then must be `developer`,
+`system`, `user`, or `assistant`. Static template syntax is checked during
+construction; missing variables and named inputs fail when rendered.
+Request variables are template data (`{{.audience}}`), and
+`{{input "note"}}` renders an input body.
 
-Each message also has exactly one of:
+`content_file` uses the effective field's own source context, including when
+inherited or imported. Its relative path is resolved against that source's
+base directory within its rooted filesystem. Absolute paths and lexical
+escapes from the selected root fail. Host-file sources also prevent symlink
+escapes. Promptkit preserves the path text, including meaningful whitespace,
+after checking that it is not blank. A source without a unique usable resource
+context must supply one explicitly or override the field. Content is captured
+at construction, not reopened for each request.
 
-- `content`, containing an inline Go template; or
-- `content_file`, naming a file whose contents are the Go template.
-
-`content_file` must be a relative path. It resolves from the directory that
-contains the prompt file and must remain within the configured prompt source
-root; parent components are allowed only when the resolved target remains
-inside that root. Absolute paths and paths that escape the root are rejected.
-Operating-system directory and single-file sources also reject symlink targets
-outside the root, while injected `fs.FS` sources apply containment in that
-filesystem's relative path namespace. For `WithPromptFile`, the source root is
-the directory containing the selected prompt file. Promptkit uses the parsed
-path text exactly after checking separately that it is not blank, so leading
-and trailing whitespace can name real filesystem entries.
-
-Request variables are the template data, so a variable named `audience` is
-referenced as `{{.audience}}`. The `{{input "note"}}` helper renders the body
-of a named input. Missing variables and input references are errors.
-
-The optional `session_id` uses the same template data and input helper. Its
-rendered value is trimmed, omitted when empty, and limited to 256 Unicode code
-points. A nonblank direct request session ID bypasses this template completely;
-a blank direct value leaves the template behavior unchanged.
+Optional `session_id` uses the same template variables and input helper. Its
+rendered value is trimmed, omitted if empty, and limited to 256 Unicode code
+points. A nonblank direct request session ID bypasses the template.
 
 ### Cache Control
 
-`cache_control` is optional and has these fields:
-
-| Field | Required | Values |
-| --- | --- | --- |
-| `type` | yes | `ephemeral` |
-| `ttl` | no | Empty or `1h` |
-
-Promptkit preserves cache-control metadata on the rendered message. The
-outbound integration determines its wire representation.
+Optional `cache_control` has required `type: ephemeral` and optional `ttl`,
+which may be empty or `1h`. Promptkit retains this metadata on rendered
+messages; the integration contract defines its wire representation.
 
 ### Output Contract
 
 | Field | Required | Values or behavior |
 | --- | --- | --- |
-| `format` | yes | `text`, `markdown`, or `json`. |
-| `validation_mode` | yes | `none`, `basic`, `json`, or `json_schema`. |
-| `schema_path` | for `json_schema` | Path to a schema in the configured schema source. |
-| `repair_attempts` | no | Integer from zero through three; omitted means zero. A positive value requires `basic`, `json`, or `json_schema` validation. |
+| `format` | yes | `text`, `markdown`, or `json` |
+| `validation_mode` | yes | `none`, `basic`, `json`, or `json_schema` |
+| `schema_path` | for `json_schema` | Path in the selected schema source |
+| `repair_attempts` | no | Integer 0–3; default 0. Positive values need `basic`, `json`, or `json_schema` |
 
-The validation modes behave as follows:
-
-- `none` skips content validation;
-- `basic` requires non-empty generated content;
-- `json` requires valid JSON; and
-- `json_schema` requires valid JSON that satisfies the selected schema.
-
-`format` controls output artifact metadata. JSON Schema mode also supplies the
-schema to compatible model clients as structured-output metadata. Plain `json`
-validation accepts every valid JSON value and does not request a provider-native
-JSON-object constraint.
-
-`repair_attempts` counts additional generation calls after a failed validation.
-Zero is single-pass. With a positive eligible budget, Promptkit stops at the
-first valid candidate. If the budget is exhausted, it returns the final
-candidate and its complete failed validation result; generation and operational
-validation failures remain errors. `none` never permits repair.
-
-A request-level `OutputContract` replaces the complete prompt output contract.
-It does not merge individual fields. If its format is empty, Promptkit uses
-`text`.
+`none` skips content validation; `basic` requires nonempty content; `json`
+accepts any valid JSON value; `json_schema` checks the selected schema.
+`format` determines output artifact metadata. JSON Schema mode also supplies
+structured-output metadata to compatible clients. Plain `json` does not
+request a provider-native JSON-object constraint. A positive repair budget
+counts additional generations after failed validation; exhaustion returns the
+last candidate and its failed validation result. Operational errors remain
+errors. A request-level `OutputContract` replaces the whole configured one,
+not individual fields; an empty request format defaults to `text`.
 
 ## Built-In Backends
 
-Every engine provides these reserved OpenAI-compatible backend IDs. Consumers
-must not register either ID with `WithBackend`; exact registration and
-reservation behavior belongs to the [`Backend` GoDoc](../backends.go).
+The selected catalog modules contribute these backend definitions as the
+earliest underlay. Their settings can be overlaid by caller sources; these IDs
+are not reserved against configuration changes.
 
-| ID | Base endpoint | API-key environment variable | Active generation limit | Default queue capacity |
-| --- | --- | --- | ---: | ---: |
-| `openrouter` | `https://openrouter.ai/api/v1` | `OPENROUTER_API_KEY` | 16 | 1024 |
-| `rakestrawhome` | `https://inference.ai.rakestrawhome.com/v1` | `RAKESTRAWHOME_INFERENCE_API_KEY` | 4 | 1024 |
+| ID | Catalog endpoint | API-key environment name | Active generation limit |
+| --- | --- | --- | ---: |
+| `openrouter` | `https://openrouter.ai/api/v1` | `OPENROUTER_API_KEY` | 16 |
+| `rakestrawhome` | `https://inference.ai.rakestrawhome.com/v1` | `RAKESTRAWHOME_INFERENCE_API_KEY` | 4 |
+
+A backend definition may have `endpoint`, `api_key_env`,
+`concurrency_limit`, `queue_capacity`, and `extra_params`. The final endpoint
+is required and must be an absolute HTTP(S) URL with a host, no user
+information, query, or fragment. An omitted or null API-key environment name
+means no lookup. Omitted/null concurrency is zero (unlimited); a supplied
+negative value is invalid. For positive concurrency, omitted/null queue
+capacity defaults to 1024. An explicit queue capacity, including zero,
+requires positive concurrency and must be nonnegative. Unlimited concurrency
+has no queue. Provider maps contain JSON-compatible values; null entries are
+ordinary JSON null. Unknown fields, including a raw `api_key`, fail.
 
 ## Profile Definitions
 
-A profile supplies model execution settings:
+Profiles are keyed by literal ID and may inherit a named parent with
+`extends`:
 
 ```yaml
-id: local-summary
-backend: openrouter
-model: example-model
-temperature: 0.2
-max_tokens: 500
-top_p: 0.95
-timeout_seconds: 90
-service_tier: flex
-reasoning_effort: medium
-extra_params:
-  provider_option: enabled
+profiles:
+  local-summary:
+    backend: local
+    model: example-model
+    temperature: 0.2
+    max_tokens: 500
+    timeout_seconds: 90
+    extra_params:
+      provider_option: enabled
+  local-summary-fast:
+    extends: local-summary
+    timeout_seconds: 30
+    reasoning_effort: low
 ```
 
-A derived profile can use a named base and override only the settings it owns:
-
-```yaml
-id: local-summary-fast
-base_profile: local-summary
-timeout_seconds: 30
-reasoning_effort: low
-```
-
-| Field | Required | Meaning |
-| --- | --- | --- |
-| `id` | yes | Profile identifier, trimmed before selection and publication. It must be non-empty after trimming and unique within one source after normalization. |
-| `base_profile` | no | One optional parent profile ID. A derived profile may inherit target fields from it. |
-| `backend` | unless `endpoint` is present | Backend registry ID. It is trimmed and registry membership is checked when the profile is prepared or inspected. |
-| `endpoint` | unless `backend` is present | OpenAI-compatible base URL, including an API version path when required. A nonempty value is trimmed and must be absolute HTTP or HTTPS with a host and without user information, a query, or a fragment. When both connection fields are present, this overrides the backend endpoint without changing backend identity. |
-| `model` | yes | Non-empty provider model name. |
-| `temperature` | no | Number from 0 through 2. |
-| `max_tokens` | no | Integer zero or greater. |
-| `top_p` | no | Number from 0 through 1. |
-| `timeout_seconds` | no | Per-generation deadline in whole seconds; integer zero or greater. |
-| `service_tier` | no | Provider-specific request tier. |
-| `reasoning_effort` | no | Provider-specific reasoning setting. |
-| `api_key_env` | no | Optional environment-variable lookup source for an API key. |
-| `extra_params` | no | JSON-compatible provider-specific outbound fields. |
-
-Raw `api_key` is prohibited in profile YAML. Store only an environment
-variable name in `api_key_env`.
-
-A standalone profile must provide a model and at least one of `backend` or
-`endpoint`. A derived profile may omit those target fields because its selected
-base chain can provide them. Local parsing still validates a derived profile's
-own ID, supplied endpoint, execution-setting bounds, and `extra_params`.
-
-Promptkit does not infer a backend from a model or endpoint. Endpoint-only
-profiles remain supported and have no effective backend ID.
-The engine always provides the built-in `openrouter` and `rakestrawhome` IDs.
-Consumers can add engine-scoped IDs with
-[`WithBackend`](../backends.go); exact registration validation belongs to its
-GoDoc.
-
-`extra_params` accepts null, booleans, finite numbers, strings, arrays, and
-objects with string keys. Keys must be non-empty. With the built-in client,
-they also cannot collide with the standard fields listed in the
-[outbound request contract](integrations/openai-compatible-chat.md#request-body).
-Excessively deep or large JSON-shaped values are rejected for safety.
+Profiles may also supply `endpoint`, `top_p`, `service_tier`, `api_key_env`,
+and `api_key_required`. Promptkit does not infer a backend from an endpoint or
+model. A profile with only an endpoint has no backend capacity identity.
+Nonblank endpoints follow the backend URL rules; temperature is 0–2, top_p
+is 0–1, max_tokens and timeout_seconds are nonnegative. Provider maps accept
+JSON-compatible values with nonempty keys and cannot collide with the built-in
+client's [standard request fields](integrations/openai-compatible-chat.md#request-body).
+Credential values do not belong in profiles: raw `api_key` is invalid.
 
 ### Defaults And Overrides
 
-Execution settings resolve in this order:
+After effective profile inheritance, Promptkit applies the selected backend's
+defaults once, then request `ExecutionTargetOverride` values. Backend-derived
+settings are not inheritance input: changing a child profile's backend does
+not carry the parent's derived endpoint or credential source into it. Changing
+only a model or backend does not clear unrelated explicitly inherited fields.
 
-1. the framework timeout baseline;
-2. the selected backend, when the profile names one;
-3. the selected profile; and
-4. request `ExecutionTargetOverride` values.
+| Profile field | Absent | Explicit value | Explicit null |
+| --- | --- | --- | --- |
+| `backend` | No backend | Exact backend ID; blank means none | No backend |
+| `endpoint` | Selected backend endpoint | Valid nonblank URL; empty clears | Clear, without backend fallback |
+| `model` | Unspecified | Nonblank model; empty clears | Unspecified |
+| `temperature`, `top_p`, `max_tokens` | Unspecified | Valid value, including outbound zero | Suppress outbound control |
+| `service_tier`, `reasoning_effort` | Unspecified | Normalized value; blank suppresses | Suppress outbound control |
+| `timeout_seconds` | 600 seconds | Nonnegative; zero disables generation deadline | Reset to 600 seconds |
+| `api_key_env` | Backend lookup name, if any | Trimmed name; blank disables | Disable backend lookup |
+| `api_key_required` | False | Boolean, including false | False |
+| `extra_params` | Backend defaults | Recursively overlay profile map on backend map | Suppress configured provider map |
 
-The framework baseline is:
-
-| Setting | Default |
-| --- | --- |
-| `temperature` | Unspecified and omitted from compatible provider requests unless a profile or runtime override selects it. |
-| `max_tokens` | Unspecified and omitted from compatible provider requests unless a profile or runtime override selects it. |
-| `top_p` | Unspecified and omitted from compatible provider requests unless a profile or runtime override selects it. |
-| `timeout_seconds` | `600` |
-
-Numeric zero in a file or in-memory profile does not select a numeric value.
-For `temperature`, `max_tokens`, and `top_p`, it leaves the provider control
-unspecified. For `timeout_seconds`, it retains the framework deadline. Numeric
-request overrides use pointers, so an explicit zero is retained and sent to
-compatible providers. In particular, an explicit request `timeout_seconds` of
-zero disables the per-generation deadline while leaving the caller context and
-transport timeout intact.
-
-Non-empty profile strings replace backend defaults, and non-empty request
-strings replace both. Request reasoning is the exception: a nil
-`ReasoningEffort` pointer inherits the profile, a pointer to a nonblank string
-trims and replaces it, and a pointer to a blank string clears it. Backend
-identity is retained when either layer overrides the endpoint, so the override
-also retains any engine-local capacity policy configured for that backend.
-Capacity configuration belongs to the Go
-[`Backend` API](../backends.go), not prompt or profile YAML. A non-empty
-`extra_params` map at each layer replaces the entire lower-precedence map
-rather than merging keys.
-The [outbound integration contract](integrations/openai-compatible-chat.md)
-defines how the effective settings are serialized.
+An empty mapping does not clear inherited map entries; null clears the whole
+map. Nested maps merge recursively, while scalar and array values replace.
+Runtime nonempty `ExtraParams` overrides replace the entire configured map.
+Request overrides otherwise follow the [public value GoDoc](../types.go).
+For example, a runtime `extra_params["extends"]` key is ordinary provider
+data, not a configuration inheritance instruction. An explicit zero timeout
+does not disable the caller context or HTTP transport timeout.
 
 ### Source And Profile Precedence
 
-An explicit request profile ID takes precedence over the prompt's
-`default_profile`. If neither is present, preparation fails. Exact profile
-inspection instead takes one explicit profile ID and does not use a prompt
-default.
+`NewEngine` composes catalog definitions first, Promptkit-owned definitions
+next, then caller underlays in their given order, with an optional main input
+last. Later tiers overlay earlier ones. Inputs within one underlay group are
+strictly composed: conflicting contributions are errors, not priority
+signals. The directory helpers discover `.yaml` and `.yml` files recursively
+in sorted order, but that order does not give one file higher precedence.
+An explicitly selected missing/unreadable root fails; an empty root contributes
+nothing. Imports are disabled by these helpers unless the caller enables them
+on an input. Single files can use ConfigKit inputs directly.
 
-Profile sources resolve matching IDs in this order:
-
-1. in-memory profiles supplied with `WithProfiles`;
-2. the ordinary configured source selected by a profile file, `fs.FS`, or
-   configured profile directory;
-3. application fallback profiles supplied with `WithFallbackProfileFS`; and
-4. Promptkit-owned profiles; and
-5. maintained external catalog profiles.
-
-A profile source supplies a complete definition; definitions and their fields
-are not merged across sources. A higher-precedence source falls back only when
-the requested profile ID is absent. An invalid matching profile is an error and
-does not fall back. In-memory `Profile` values follow the same ranges as YAML
-profiles. They use `APIKeyRequired` for request-scoped credentials instead of
-`api_key_env`. Preparation and exact profile inspection use this same source
-precedence.
-
-When a selected definition names `base_profile`, every profile ID in that
-chain is looked up through this same precedence order. A higher-precedence
-definition therefore shadows a lower-precedence definition of the same base
-ID, including a built-in. References are not source-qualified.
+Backends, profiles, and prompts all follow these same source rules. A later
+profile or backend can change individual fields of a lower definition. A
+request `ProfileID` takes precedence over a prompt `default_profile`; if
+neither is selected, preparation fails. Exact profile inspection selects one
+explicit ID and does not consult a prompt default.
 
 ### Profile Inheritance
 
-Promptkit resolves one linear base chain of at most 32 profiles, including the
-selected profile. It merges settings from the root base to the selected leaf.
-The leaf's `id` remains the selected profile identity. Nonblank string fields
-(`backend`, `endpoint`, `model`, `service_tier`, `reasoning_effort`, and
-`api_key_env`) and nonzero numeric fields replace inherited values. A nonempty
-`extra_params` map replaces the complete inherited map rather than merging
-keys, and `APIKeyRequired: true` remains true through the chain. Backend and
-endpoint are independent: replacing one does not clear the other.
-
-There is no profile-level clearing syntax. Blank strings, zero numbers, false,
-and empty maps remain unspecified and inherit from a base. Use existing
-presence-aware request overrides where an execution needs an explicit zero or
-empty reasoning setting.
-
-An absent directly selected profile reports the ordinary not-found error. Once
-the selected profile exists, a missing base, cycle, overlong chain, or
-incomplete resolved target is a profile-load failure. Ordinary operations
-resolve chains afresh; prepared execution retains the fully resolved target.
+ConfigKit resolves `extends` on effective profile definitions. One profile
+may inherit another keyed profile; presence, explicit null, and recursively
+merged maps determine the final fields. References are literal IDs, including
+IDs containing punctuation. There is no Promptkit-specific depth limit or
+second base-chain resolver. Missing references and cycles fail at construction.
+For generic inheritance and layer mechanics, consult
+[ConfigKit](https://gitea.maximumdirect.net/eric/ConfigKit).
 
 ## Built-In Profile Catalog
 
-Every built-in profile selects one maintained built-in backend and inherits
-that backend's connection and credential metadata. Profile files do not repeat
-those values. A configured, application fallback, or in-memory profile with
-the same profile ID takes precedence.
-
-Promptkit owns two opt-in profiles. The following definitions are current
-selections, not automatic defaults:
+Promptkit contributes two opt-in definitions; neither is selected by default:
 
 | ID | Current definition |
 | --- | --- |
-| `promptkit-openrouter-standard` | Inherits `gemini-flash-latest`. |
+| `promptkit-openrouter-standard` | Extends the selected OpenRouter catalog's `gemini-flash-latest` profile. |
 | `promptkit-openrouter-auto` | Selects backend `openrouter` and model `openrouter/auto`. |
 
-Select either name through an existing request `profile_id` or prompt
-`default_profile`. Consumers can replace either definition or its inherited
-base through the ordinary profile-source precedence above. The
-[release policy](policy/release.md#catalog-profile-compatibility) defines the
-cross-version guarantee for these names.
+Select one through request `ProfileID` or prompt `default_profile`.
+Caller layers may overlay these definitions or their catalog bases. The
+[release policy](policy/release.md#catalog-profile-compatibility) owns their
+cross-version compatibility boundary.
 
 ## External Profile Inventories
 
-The external profile inventory is defined by the selected catalog modules, not
-duplicated here. Browse the exact data selected by this Promptkit version:
+The selected catalog modules, not this document, own their profile inventories:
 
-- [OpenRouter catalog v2.20260926.0 profiles](https://gitea.maximumdirect.net/eric/promptkit-backend-openrouter/src/tag/v2.20260926.0/catalog/profiles)
-- [Rakestrawhome catalog v2.20260926.0 profiles](https://gitea.maximumdirect.net/eric/promptkit-backend-rakestrawhome/src/tag/v2.20260926.0/catalog/profiles)
+- [OpenRouter catalog v3.20260930.0 profiles](https://gitea.maximumdirect.net/eric/promptkit-backend-openrouter/src/tag/v3.20260930.0/catalog/profiles)
+- [Rakestrawhome catalog v3.20260930.0 profiles](https://gitea.maximumdirect.net/eric/promptkit-backend-rakestrawhome/src/tag/v3.20260930.0/catalog/profiles)
 
-External profile entries are volatile across catalog releases. The
-[release policy](policy/release.md#catalog-profile-compatibility) owns the precise
-compatibility boundary; a selected module version identifies tested local data,
-not live provider availability.
+These are tested local data, not a promise of live provider availability.
+The [release policy](policy/release.md#catalog-profile-compatibility) owns
+the compatibility boundary.
 
 ## Schemas
 
-Schemas are JSON documents selected by a prompt or request
-`schema_path`. For a directory or `fs.FS` source, paths resolve within the
-configured source root. Referenced nested schemas resolve relative to the
-owning schema document. `WithSchemaFile` exposes one schema, addressed by its
-base name.
-
-An unreadable, invalid, or unresolvable schema produces an operational
-validation error. Generated content that is valid JSON but does not satisfy the
-schema produces a failed validation result.
+Schemas are JSON documents selected by a prompt or request `schema_path`.
+Directory and `fs.FS` schema paths resolve within the configured root;
+referenced nested schemas resolve relative to the owning schema document.
+`WithSchemaFile` exposes one schema under its base name. An unreadable,
+invalid, or unresolvable schema causes an operational validation error.
+Valid JSON that fails the schema instead yields a failed validation result.
 
 ## Credentials
 
-Credential values belong at the request or environment boundary, never in
-prompt, profile, schema, or example files:
+Only environment-variable names belong in backend/profile definitions, never
+credential values. A request may supply a direct `APIKey` or an `APIKeyEnv`
+override. A direct key takes precedence, followed by a request environment
+source, an explicit profile source, and an inherited backend source. A true
+profile `api_key_required` suppresses the backend-derived environment source,
+but an explicit profile or request environment source remains usable. False
+restores ordinary optional-credential behavior. Missing or blank optional
+environment values leave the built-in client's Authorization header absent;
+required availability is checked at preparation and again during prepared
+execution. Injected clients own their credential-resolution behavior.
 
-- a backend or file profile can name an optional environment lookup source
-  with `APIKeyEnv` or `api_key_env`;
-- an in-memory profile may set `APIKeyRequired` as an explicit local
-  requirement;
-- a request can provide a direct `APIKey` or override the optional `APIKeyEnv`
-  source; and
-- a direct request key takes precedence over environment lookup.
-
-After a direct request key, the credential-source precedence is request
-`APIKeyEnv`, profile `api_key_env`, then the backend default. An in-memory
-profile with `APIKeyRequired` clears an inherited backend environment name and
-requires a direct key unless the request explicitly supplies `APIKeyEnv`.
-Named environment sources are optional: when the selected source is absent,
-empty, or whitespace-only, the built-in client omits the `Authorization`
-header and handles the provider response normally. `APIKeyRequired` is the
-only explicit local availability requirement. Promptkit validates required
-credential availability during preparation and rechecks it when a prepared
-execution runs. Injected clients receive resolved source metadata but define
-their own credential-resolution behavior.
-Direct keys are excluded from JSON results and redacted by public string
-formatters. Environment-variable names may appear in prepared metadata, but
-their values do not.
+Credential values are excluded from JSON results and redacted by public
+string formatters. ConfigKit inspection redacts credential-shaped dynamic
+provider keys, but does not make arbitrary prompt/provider content safe to
+disclose. Applications own report disclosure and secret handling.

docs/internal/overview.md

@@ -11,27 +11,28 @@ contributor workflow and validation.
 
 | Component | Implemented responsibility | References |
 | --- | --- | --- |
-| Root `promptkit` package | Provides the supported engine facade, source, backend-registration, and injection options, public request, result, prompt-inspection, profile-inspection, and ordinary-run observation values, opaque prepared-execution handles, profile construction, extension interfaces, value conversion, redacted formatting, and typed capacity and generation error mapping. | [Package GoDoc](../../doc.go), [observations](../../observations.go), [prepared execution](../../prepared_execution.go), [backend API](../../backends.go), [engine facade](../../engine.go) |
-| `examples/go-library/prepare` | Demonstrates an offline downstream consumer using a prompt file, in-memory profile, inline input, and `Prepare`. It is not a public library package. | [Example program](../../examples/go-library/prepare/main.go) |
-| `examples/go-library/run` | Demonstrates an offline downstream consumer using a prompt file, in-memory profile, inline input, an injected deterministic model client, and `Run`. It is not a public library package. | [Example program](../../examples/go-library/run/main.go) |
+| Root `promptkit` package | Provides the supported engine facade, ConfigKit source helpers, profile and backend mapping conveniences, injection options, public requests and results, explicit inspection, observation values, opaque prepared-execution handles, value conversion, redacted formatting, and typed capacity and generation error mapping. | [Package GoDoc](../../doc.go), [observations](../../observations.go), [prepared execution](../../prepared_execution.go), [backend API](../../backends.go), [engine facade](../../engine.go) |
+| `examples/go-library/prepare` | Demonstrates offline preparation and explicit configuration inspection with a prompt file, programmatic profile, and inline input. It is not a public library package. | [Example program](../../examples/go-library/prepare/main.go) |
+| `examples/go-library/run` | Demonstrates an offline downstream consumer using a prompt file, programmatic profile, inline input, an injected deterministic model client, and `Run`. It is not a public library package. | [Example program](../../examples/go-library/run/main.go) |
 | `examples/go-library/observe` | Demonstrates offline built-in HTTP retry and synchronous metadata observation across structured proposal and assessment runs using embedded sources, two profiles on one finite backend, and an application decision. It is not a public library package. | [Example program](../../examples/go-library/observe/main.go) |
-| `internal/backend` | Constructs each engine's immutable registry from maintained definitions and consumer additions, validates and defensively copies definitions through the shared JSON-value package, and consumes the LLM-owned OpenAI-compatible reserved request-field rule. | [Backend registry](../../internal/backend/registry.go) |
-| `internal/catalog` | Strictly validates imported immutable maintained backend and profile catalog assets before engine assembly uses them. | [Catalog adapter](../../internal/catalog/catalog.go), [internal sources](sources.md#profiles-and-built-ins) |
+| `internal/backend` | Holds a defensive, immutable lookup and capacity-policy index for final backend definitions validated by the configuration adapter. | [Backend registry](../../internal/backend/registry.go) |
+| `internal/catalog` | Selects released keyed catalog assets and PromptKit-owned profile definitions as ConfigKit underlays; effective validation belongs to the configuration loader. | [Catalog adapter](../../internal/catalog/catalog.go), [internal sources](sources.md#profiles-and-built-ins) |
+| `internal/configuration` | Loads keyed backend, profile, and prompt configuration through ConfigKit; records effective field presence, validates final values, captures indexed prompt definitions and referenced message content, constructs backend and presence-aware profile snapshots, and retains an explicit read-only inspection view. | [Typed loader](../../internal/configuration/load.go), [internal sources](sources.md#typed-configuration-loading) |
 | `internal/capacity` | Owns engine-local bounded execution admission and FIFO model-generation permits for limited backend IDs, including cancellation-safe waiter removal and client wrapping. | [Internal capacity management](capacity.md) |
 | `internal/domain` | Defines internal framework values for requests, artifacts, prompt definitions, profiles, execution targets, rendering, generation, and validation, and owns source-neutral invariants for shared execution settings, OpenAI-compatible base endpoints, session identifiers, and output contracts. Source parsing, required fields, other source-specific normalization, defaulting, and boundary-specific error classification remain with their callers. | [Domain declarations](../../internal/domain/domain.go), [endpoint invariant](../../internal/domain/endpoint.go) |
-| `internal/engine` | Assembles external catalogs, Promptkit-owned profiles, repositories, registry, capacity, collaborators, repairer, and the one use-case runner for each engine instance. | [Engine assembly](../../internal/engine/engine.go), [internal sources](sources.md#profiles-and-built-ins), [internal runner](runner.md) |
+| `internal/engine` | Assembles selected catalog and caller configuration into one snapshot, then constructs capacity, rendering, validation, generation, repair, and the use-case runner for each engine. | [Engine assembly](../../internal/engine/engine.go), [internal sources](sources.md#profiles-and-built-ins), [internal runner](runner.md) |
 | `internal/generation` | Coordinates frozen built-in HTTP attempts and one-shot injected calls through active backend permits, including bounded status retries, cancellable backoff, and attempt observations. | [Internal generation coordination](generation.md) |
 | `internal/defaults` | Defines application-neutral framework constants and constructs the default execution target. It contains no CLI, server, or inbound HTTP limits. | [Framework defaults](../../internal/defaults/defaults.go) |
 | `internal/filecatalog` | Provides deterministic YAML discovery and path helpers for operating-system filesystems and `fs.FS` sources. | [File catalog](../../internal/filecatalog/catalog.go) |
 | `internal/jsonvalue` | Validates and deeply copies bounded JSON-compatible extra-parameter and prepared-schema trees while preserving supported concrete value types and rejecting cycles or excessive depth and work. | [JSON values](../../internal/jsonvalue/jsonvalue.go) |
-| `internal/promptdef` | Loads strictly decoded, validated prompt definitions from filesystem and `fs.FS` sources, including version selection and contained file-backed message content. | [Framework formats](../formats.md), [prompt-definition repository](../../internal/promptdef/filesystem_repository.go) |
-| `internal/profile` | Owns immutable in-memory and filesystem profile repositories, local profile validation, raw-source overlays with error-preserving fallback, and inherited-profile resolution. | [Framework formats](../formats.md), [profile repositories](../../internal/profile/filesystem_repository.go), [internal sources](sources.md#profiles-and-built-ins) |
+| `internal/promptdef` | Provides a narrow captured-prompt lookup contract, not-found identity, and execution-ready definition hash. | [Prompt lookup](../../internal/promptdef/repository.go), [framework formats](../formats.md) |
+| `internal/profile` | Provides a narrow captured-profile lookup contract and not-found identity. | [Profile lookup](../../internal/profile/repository.go), [framework formats](../formats.md) |
 | `internal/prompt` | Renders prompt messages from Go templates with artifact, variable, session, and cache-control data. | [Go-template renderer](../../internal/prompt/go_renderer.go) |
 | `internal/artifact` | Resolves ordinary inline and unrestricted caller-selected file references into copied artifacts with metadata and hashes. | [Internal sources and validation](sources.md) |
 | `internal/validate` | Validates basic, JSON, and JSON Schema output using operating-system filesystem or `fs.FS` schema sources and creates operation-local validation plans with canonical contained schema resources. | [Framework formats](../formats.md#schemas), [internal sources and validation](sources.md) |
 | `internal/llm` | Defines the internal generation boundary and implements outbound OpenAI-compatible chat requests from resolved execution targets, including bounded structured non-success response decoding, successful-response decoding, authentication, deadline handling, and ownership of the OpenAI-compatible reserved request-field policy. | [Internal model client](llm.md) |
 | `internal/observation` | Owns invocation-local run IDs, presence-aware usage and phase accounting, and synchronous metadata event delivery for ordinary and claimed prepared runs and generation attempts. | [Internal execution observation](observation.md) |
-| `internal/usecase` | Resolves prompt definitions and hashes, profiles, backends, and targets for exact inspection and request settings for preparation, and coordinates ordinary and single-claim prepared execution across internal sources, rendering, artifact loading, operation-local validation plans, generation, capacity, and bounded repair. | [Internal runner](runner.md), [prepared-execution implementation](../../internal/usecase/prepared_execution.go) |
+| `internal/usecase` | Selects captured prompts and profiles, applies request overrides and completion checks, and coordinates ordinary and single-claim prepared execution across rendering, artifact loading, operation-local validation plans, generation, capacity, and bounded repair. | [Internal runner](runner.md), [prepared-execution implementation](../../internal/usecase/prepared_execution.go) |
 
 The internal engine assembles these internal components without exposing their
 representations. Consumers depend only on the root facade.

docs/internal/runner.md

@@ -4,7 +4,7 @@
 
 This document describes Promptkit's implemented internal orchestration. The
 [architecture policy](../policy/architecture.md) owns dependency and consumer
-boundaries. The [source and validation document](sources.md) owns repository,
+boundaries. The [source and validation document](sources.md) owns configuration,
 artifact, rendering, and validation behavior, while the
 [model-client document](llm.md) owns generation behavior and failure
 categories.
@@ -16,11 +16,10 @@ and override semantics consumed by the runner.
 
 ## Collaborators
 
-`Runner` coordinates narrow internal interfaces for prompt definitions,
-profiles, backend resolution, artifacts, rendering, model generation, and
-validation. The internal engine supplies one immutable registry containing the
-built-in backend and validated consumer additions, one engine-local run
-admitter, and a generation coordinator using the same capacity manager. Validation
+`Runner` coordinates narrow internal interfaces for captured prompt definitions
+and resolved profiles, artifacts, rendering, model generation, and validation.
+The internal engine supplies one engine-local run admitter and a generation
+coordinator using the same capacity manager. Validation
 plans and provider-facing schema metadata come from the validator's preparation
 interface.
 The internal engine supplies one default output repairer through the explicit
@@ -35,11 +34,11 @@ The runner has no durable run or session store.
 
 The runner uses one prompt-selection and hashing boundary for ordinary
 preparation and exact prompt inspection. Preparation retains its early
-request-ID check before direct-session normalization; both operations then use
-the configured prompt repository to select one definition, load referenced
-message content, and calculate the same prompt hash.
+request-ID check before direct-session normalization; both operations select
+one captured definition and its construction-time hash. Referenced message
+content and static template syntax were captured when the engine was built.
 
-Inspection stops after that structural lookup. It does not parse templates or
+Inspection stops after that structural lookup. It does not render templates or
 touch profile, artifact, schema, renderer, validator, admission, or model
 collaborators. The root [`Engine.InspectPrompt`](../../engine.go) GoDoc owns
 the public operation's exact contract.
@@ -49,12 +48,11 @@ the public operation's exact contract.
 The runner uses one profile-selection and target-resolution boundary for
 ordinary preparation and exact profile inspection. Preparation first selects a
 request profile or a prompt default; inspection begins with its required
-explicit profile ID. Both then apply the ordinary source precedence, resolve a
-named backend, and construct the effective target from framework, backend, and
-profile values.
-
-Inspection stops after the resulting endpoint and model are structurally
-validated. It does not check credential availability or perform prompt,
+explicit profile ID. Both use the captured, presence-aware target constructed
+from the final effective profile and backend configuration. Request overrides
+apply afterward; preparation checks endpoint and model completeness only after
+those overrides. Inspection can report a partial profile without requiring a
+runnable target. Neither path checks credential availability or performs prompt,
 artifact, schema, rendering, admission, or model-client work. The root
 [`Engine.InspectProfile`](../../engine.go) GoDoc owns the public operation's
 exact contract.
@@ -66,11 +64,10 @@ where a run can be assigned to its selected backend pool. The resolution phase
 performs only the work needed to validate routing and admission:
 
 1. validate the required prompt selection and normalize any direct session ID;
-2. load the prompt definition and hash the original definition;
+2. select the captured prompt definition and hash;
 3. select the request profile or the prompt's default profile;
-4. resolve the profile's backend ID, when present;
-5. resolve application-neutral defaults, backend defaults, profile values,
-   and explicit request overrides in that order;
+4. retain the profile's selected backend identity, when present;
+5. apply explicit request overrides to its captured backend-completed target;
 6. validate endpoint, model, numeric overrides, and credential requirements;
 7. resolve and validate the effective output contract without loading its
    schema; and
@@ -102,26 +99,26 @@ Pointer-based numeric overrides preserve an explicit zero. Invalid negative or
 out-of-range values fail as invalid requests. Endpoint overrides do not change
 the selected backend identity. Non-empty extra-parameter maps replace whole
 lower-precedence maps. A direct API key takes precedence over environment
-lookup; otherwise request, profile, and backend environment-variable names
-apply in that order. A profile requiring a direct key clears an inherited
+lookup; otherwise request, explicit profile, and backend environment-variable
+names apply in that order. A profile requiring a direct key suppresses an inherited
 backend environment name unless the request supplies its own name. Secret
 values remain excluded from serialized metadata.
 
 Reasoning overrides are tri-state: nil inherits the profile, a pointer to a
 nonblank string trims and replaces it, and a pointer to a blank string clears
-it. A nonblank direct session is normalized before source loading, bypasses
+it. A nonblank direct session is normalized before prompt selection, bypasses
 the prompt session template, and is applied after ordinary message rendering.
 A blank direct value retains prompt-template behavior. The runner clears the
 template only on a value copy of the definition, so the definition hash always
-describes the original source while the rendered-prompt hash includes the
+describes captured effective content while the rendered-prompt hash includes the
 effective direct or rendered session and the complete effective message
 sequence. The rendered-prompt hash uses a versioned, length-framed SHA-256
 encoding of that session, every role and content value, and cache-control
 presence and values; its hexadecimal value is opaque.
 
-The registry is read-only after engine construction. Concurrent `Prepare` and
-`Run` calls resolve independent defensive backend values and keep all
-invocation state local.
+The configuration snapshot is read-only after engine construction. Concurrent
+`Prepare` and `Run` calls copy their resolved targets and keep all invocation
+state local.
 
 ## Run Flow
 
@@ -215,7 +212,7 @@ generation, validation, repair, and cancellation failures.
 Other context cancellation propagates through the invoked collaborator and is
 classified by the owning operation. In particular, cancellation observed by
 validation retains the context identity through the validation error category.
-An overlong direct session is an invalid request before source loading, while
+An overlong direct session is an invalid request before prompt selection, while
 an invalid or overlong prompt session template remains a prompt-render failure.
 An unknown selected backend, or a selected backend with no configured resolver,
 is classified as a profile-load failure.

docs/internal/sources.md

@@ -2,117 +2,73 @@
 
 ## Purpose
 
-This document describes Promptkit's implemented internal source, artifact,
+This document describes Promptkit's implemented configuration, artifact,
 rendering, and output-validation behavior. The
-[architecture policy](../policy/architecture.md) owns the library boundary and
-dependency rules. None of these internal packages is a supported consumer API,
-and the internal engine assembles them behind the public facade's source options and values.
-The [framework format reference](../formats.md) owns the exact file fields,
-validation modes, built-in catalog, and source precedence.
+[architecture policy](../policy/architecture.md) owns dependency rules, while
+the [framework format reference](../formats.md) owns fields, defaults, and
+source semantics. Internal packages are not consumer APIs.
+
+## Typed Configuration Loading
+
+`internal/configuration` is the single adapter from ConfigKit's final
+effective configuration to execution-owned definitions. It performs one
+layered load, captures effective presence (including explicit null), records
+normalization and defaults through resolution, and validates all effective
+backend, profile, and prompt values. Replaced lower-layer domain values are
+not separately validated. It builds an immutable backend index and
+presence-aware profile targets, applying final backend defaults only after
+profile inheritance. It retains ConfigKit's result privately for explicit
+inspection, not for per-run resolution. The runtime/domain packages do not
+depend on ConfigKit.
+
+The root `DirectoryInputs` and `FilesystemInputs` helpers discover sorted YAML
+files under an explicit root, provide resource context, and leave imports
+disabled. Each returned slice belongs to one strict-composition group; file
+order does not confer priority. The engine prepends selected catalog and
+Promptkit-owned definitions, then caller underlays and optional main. The
+[configuration tests](../../internal/configuration/load_test.go) exercise the
+real loader and final-value handoff.
 
 ## Prompt Definitions
 
-`internal/promptdef` uses one source-neutral flow for prompt selection and
-normalization. That flow scans normalized YAML ID and version metadata,
-requires one strictly decoded document per file, classifies errors for the
-selected definition, detects duplicates, and normalizes the exact match.
-Small operating-system and `fs.FS` adapters own discovery, byte reads, display
-paths, content opening, and root containment. Each lookup remains a
-point-in-time scan: definitions and catalogs are not cached, and file-backed
-message content is opened only for the exact selected candidate.
+The configuration adapter indexes each prompt by exact ID and version,
+materializes file-backed message content using the exact effective field's
+origin and resource context, and checks static message/session template syntax
+at construction. It stores captured content, compiled templates, declared
+input metadata, and a definition hash. It closes content-file handles before
+returning and retains no source capability for public inspection.
 
-Message roles are normalized through the shared domain owner by trimming
-Unicode whitespace and lowercasing. Only `developer`, `system`, `user`, and
-`assistant` are published; invalid roles remain selected prompt-definition
-failures rather than becoming request errors. Cache-control metadata uses the
-same shared domain normalization and defensive-copy rule.
+Role and cache-control normalization is applied to execution-owned message
+copies. The retained ConfigKit configuration keeps effective input message
+metadata and its resource origins: recording a sequence-wide normalization in
+ConfigKit v0.5.0 would replace origins of unchanged content-file fields.
 
-Operating-system sources enforce containment against canonical roots and
-targets so symlinks cannot escape. Injected `fs.FS` sources enforce containment
-in their clean relative path namespace. A single-file source uses the selected
-prompt file's containing directory as its root. Every content path must be
-relative and is opened from its exact parsed text after a separate blank check;
-contained parent components and whitespace-bearing names remain valid.
-
-Exact prompt inspection performs one point-in-time lookup through that same
-repository and validates referenced message content before returning declared
-metadata. It does not parse templates or read profile, input, or schema
-sources, and it does not retain the definition for a later execution.
-
-Its package tests own prompt selection, strict decoding, definition validation,
-duplicate detection, and source containment:
-[prompt-definition repository tests](../../internal/promptdef/repository_test.go).
+The runner selects from this index for preparation and `InspectPrompt`.
+Neither path rescans configuration or reopens message files. `InspectPrompt`
+returns declared metadata without rendering or resolving profile, input, or
+schema resources. Runtime rendering still checks request variables and input
+helpers. The [prompt adapter tests](../../internal/configuration/prompts_test.go)
+cover resource origins, context containment, capture, and selection.
 
 ## Profiles And Built-Ins
 
-`internal/profile` owns immutable in-memory and filesystem repositories, local
-validation, overlays, and resolution for execution profiles. In-memory
-definitions are normalized and validated once at that repository boundary and
-are defensively copied on storage and lookup. A file contains
-exactly one YAML document and its trimmed YAML `id` is its only selection
-identity; filenames do not confer authority. Each point lookup reads discovered
-files once for their metadata and reuses the selected file's bytes for strict
-decoding; unrelated profiles are not fully decoded. Strict selected decoding
-recognizes `base_profile` and the optional `backend` field, trims their values,
-and permits inherited target fields only when a base is named. File-backed
-`extra_params` values are validated and defensively copied through the shared
-bounded JSON-value owner before a profile is published. OpenAI-compatible
-reserved-field policy remains with the model-client and backend-registry owners.
+`internal/catalog` selects the released keyed OpenRouter and Rakestrawhome
+assets as one ConfigKit underlay and PromptKit-owned profiles as the next.
+It discovers YAML inputs and supplies passive filesystem context without
+parsing or pre-validating catalog definitions. The configuration loader
+validates only the final effective backend and profile values, including
+consumer overlays of maintained bases or backends. There is no catalog-only
+preflight, reserved source namespace, or replay of backend registration.
 
-`LoadFSRepository` is the eager immutable loading boundary for internal
-catalog consumers. It discovers and strictly validates every raw profile once,
-preserves safe source metadata including explicitly present YAML fields, and
-publishes independently copied values from memory. It does not resolve profile
-inheritance. Configured consumer sources continue to use the lazy point lookup
-repositories described above.
-
-`internal/catalog` validates the imported immutable OpenRouter and
-Rakestrawhome asset modules as one private adapter boundary. It enforces their
-manifest, layout, profile ownership, inheritance, and secret-safety rules
-before returning raw catalog sources. Internal engine assembly uses those validated
-catalogs as the lowest-precedence profile source.
-
-Normalized external catalog profile IDs with the exact `promptkit-` prefix are
-rejected at this adapter boundary. That reservation applies only to imported
-catalogs; configured consumer sources retain the ordinary profile-ID rules.
-
-The overlay repository consults the next repository only when the
-higher-precedence repository reports that a profile is absent. A reliably
-selected malformed profile stops fallback, while an unrelated malformed file
-does not become authoritative through its filename. Loading does not check
-backend registry membership because the available registry belongs to the
-assembled engine; the runner checks membership during preparation and exact
-profile inspection.
-
-The internal engine assembles one raw composite catalog in precedence order:
-in-memory profiles, one ordinary configured source, an application fallback
-source, Promptkit-owned profiles, then the maintained external catalog. It
-constructs the owned definitions through the in-memory repository and validates
-their maintained-only resolution and backend membership before consumer sources
-are overlaid. An explicit file or `fs.FS` profile source replaces
-`Config.ProfileDir` within the ordinary configured-source category. One outer
-resolving repository wraps that complete raw catalog, so each base lookup
-observes the same precedence and shadowing rules.
-
-The resolving repository traverses every selected chain afresh, retains no
-cache, detects cycles, limits a chain to 32 profiles, merges root-to-leaf into a
-new caller-owned value, and validates the final target before publishing it. It
-does not check backend registry membership. Exact `base_profile` syntax, merge
-rules, and consumer-visible failure behavior belong to the [framework format
-reference](../formats.md#profile-inheritance).
-
-Exact profile inspection performs one point-in-time resolved lookup through
-those profile sources and checks the final target without reading prompt, input,
-or schema sources. It does not retain that lookup for a later execution.
-Prepared execution instead freezes the fully resolved target; a later ordinary
-operation performs a fresh traversal.
-
-The imported external catalog provides external profiles and matching backend
-definitions. The internal engine owns the Promptkit profiles documented in the
-[framework format reference](../formats.md#built-in-profile-catalog). Profile
-loading and overlay behavior are owned by the [profile repository tests](../../internal/profile/repository_test.go), while
-catalog completeness, backend selection, and duplicate IDs are owned by the
-[catalog adapter tests](../../internal/catalog/catalog_test.go).
+ConfigKit resolves profile inheritance before the handoff. The configuration
+adapter validates effective references and field values, then builds target
+snapshots with backend defaults and presence/suppression state. A profile can
+remain partial until runtime overrides complete it. `InspectProfile` selects
+that captured target without prompt, artifact, schema, credential lookup, or
+provider work. Preparation applies runtime overrides and then checks target
+completeness. The [target tests](../../internal/configuration/targets_test.go)
+cover effective target interpretation, while the [catalog tests](../../internal/catalog/catalog_test.go)
+cover selected released assets.
 
 ## Ordinary Artifacts
 
@@ -137,14 +93,15 @@ implemented reader behavior and failures.
 
 ## Rendering
 
-`internal/prompt` renders definition messages as Go templates using named
-artifacts and variables. Within one render, each referenced artifact body is
-converted to text lazily and cached by input name for reuse across the session
-and every message; the cache is not shared across renders. Conversion uses
-bounded chunks and preserves the artifact bytes exactly.
+`internal/prompt` renders captured, pre-parsed definition templates using named
+artifacts and variables. It clones templates to bind request-specific input
+helpers without mutating shared state. Within one render, each referenced
+artifact body is converted to text lazily and cached by input name for reuse
+across the session and every message; the cache is not shared across renders.
+Conversion uses bounded chunks and preserves the artifact bytes exactly.
 
-Session and message parsing and execution remain synchronous. The renderer
-checks cancellation before and after each parse and execution boundary,
+Template parsing occurs during engine construction. Runtime execution remains
+synchronous. The renderer checks cancellation around execution boundaries,
 between artifact conversion chunks, around each message, and before publishing
 the complete prompt. It cannot interrupt template work already in progress and
 never publishes a partial prompt after observing cancellation. It validates and
@@ -181,9 +138,10 @@ not detach dependency work into background goroutines.
 `Prepare` discards its validation plan after returning metadata. `Run` retains
 its plan for initial and repaired-output validation, then discards it with the
 operation. `PrepareExecution` retains the plan in its private frozen payload;
-`RunPrepared` uses that plan without reopening prompt, profile, input, or
-schema sources or rerendering the request. A later ordinary `Run` always
-performs fresh source resolution and preparation.
+`RunPrepared` uses that plan without reopening configuration, message, input,
+or schema resources or rerendering the request. A later ordinary `Run` uses
+the same captured configuration but prepares request artifacts and schemas
+afresh.
 
 The [validator tests](../../internal/validate/standard_validator_test.go) own
 basic, JSON, JSON Schema, source resolution, schema loading, compilation,

docs/oss/attribution.md

@@ -1,60 +1,75 @@
 # Open Source Attribution Notices
 
-These entries identify upstream material used by Promptkit. The
-[OSS policy](../policy/oss.md) owns the format and maintenance rules; the
-[project grant](../../COPYRIGHT) does not replace third-party terms.
+## Standard Repository Policies
 
-The module entries cover the five external modules used by `go list -deps -test
-./...` at adoption, including the transitive `golang.org/x/text` dependency.
-Other modules present only in dependency module graphs are not thereby
-incorporated into Promptkit. No separately copied third-party code or asset
-notices were identified in Promptkit's source; adapted policy documents are
-attributed separately below. Standard license texts in `licenses/` are shared
-reference texts, not additional project grants.
+Material: policy documents under `docs/policy/` and the Policy Reading Guide in
+`docs/development.md`, adapted for this repository; root `AGENTS.md`, copied
+without modification from upstream `agents/AGENTS.md`.
 
-## Promptkit OpenRouter Catalog
+Copyright (C) 2026 Eric Rakestraw
 
-Selected module: `gitea.maximumdirect.net/eric/promptkit-backend-openrouter/v2`
-at `v2.20260926.0`.
+SPDX-License-Identifier: CC-BY-SA-4.0
+
+License and notices: [CC BY-SA 4.0](licenses/CC-BY-SA-4.0.txt) |
+[COPYRIGHT](https://gitea.maximumdirect.net/eric/policy/src/commit/d84a38ebab26f048cafbe59a2246700c35d29843/COPYRIGHT) |
+[LICENSE](https://gitea.maximumdirect.net/eric/policy/src/commit/d84a38ebab26f048cafbe59a2246700c35d29843/LICENSE).
+
+[Source](https://gitea.maximumdirect.net/eric/policy/src/commit/d84a38ebab26f048cafbe59a2246700c35d29843).
+
+## ConfigKit
+
+Selected module: `gitea.maximumdirect.net/eric/ConfigKit` at `v0.5.0`.
+
+Copyright (C) 2026 Eric Rakestraw
+
+SPDX-License-Identifier: LGPL-3.0-or-later
+
+License and notices: [LGPL 3.0](../../LICENSE) |
+[COPYRIGHT](https://gitea.maximumdirect.net/eric/ConfigKit/src/commit/dc09959cca4e105f49ec316c6d4ba585bd2340bd/COPYRIGHT) |
+[LICENSE](https://gitea.maximumdirect.net/eric/ConfigKit/src/commit/dc09959cca4e105f49ec316c6d4ba585bd2340bd/LICENSE).
+
+[Source](https://gitea.maximumdirect.net/eric/ConfigKit/src/commit/dc09959cca4e105f49ec316c6d4ba585bd2340bd).
+
+## Promptkit OpenRouter Catalog v3
+
+Selected module: `gitea.maximumdirect.net/eric/promptkit-backend-openrouter/v3`
+at `v3.20260930.0`.
 
 Copyright (C) 2026 Eric Rakestraw
 
 SPDX-License-Identifier: MIT
 
 License and notices: [MIT](licenses/MIT.txt) |
-[COPYRIGHT](https://gitea.maximumdirect.net/eric/promptkit-backend-openrouter/src/commit/4f731d217e0bc39151c010f50fb5912706e7b6b3/COPYRIGHT) |
-[upstream LICENSE](https://gitea.maximumdirect.net/eric/promptkit-backend-openrouter/src/commit/4f731d217e0bc39151c010f50fb5912706e7b6b3/LICENSE).
+[COPYRIGHT](https://gitea.maximumdirect.net/eric/promptkit-backend-openrouter/src/commit/f17d208cb7ad1fb043cda2266cd3011d11b40aa0/COPYRIGHT) |
+[LICENSE](https://gitea.maximumdirect.net/eric/promptkit-backend-openrouter/src/commit/f17d208cb7ad1fb043cda2266cd3011d11b40aa0/LICENSE).
 
-Source: [OpenRouter catalog at the imported commit](https://gitea.maximumdirect.net/eric/promptkit-backend-openrouter/src/commit/4f731d217e0bc39151c010f50fb5912706e7b6b3).
+[Source](https://gitea.maximumdirect.net/eric/promptkit-backend-openrouter/src/commit/f17d208cb7ad1fb043cda2266cd3011d11b40aa0).
 
-## Promptkit Rakestrawhome Catalog
+## Promptkit Rakestrawhome Catalog v3
 
-Selected module: `gitea.maximumdirect.net/eric/promptkit-backend-rakestrawhome/v2`
-at `v2.20260926.0`.
+Selected module: `gitea.maximumdirect.net/eric/promptkit-backend-rakestrawhome/v3`
+at `v3.20260930.0`.
 
 Copyright (C) 2026 Eric Rakestraw
 
 SPDX-License-Identifier: MIT
 
 License and notices: [MIT](licenses/MIT.txt) |
-[COPYRIGHT](https://gitea.maximumdirect.net/eric/promptkit-backend-rakestrawhome/src/commit/48918a3ad39fd99843cda94a86133b1b3881d596/COPYRIGHT) |
-[upstream LICENSE](https://gitea.maximumdirect.net/eric/promptkit-backend-rakestrawhome/src/commit/48918a3ad39fd99843cda94a86133b1b3881d596/LICENSE).
+[COPYRIGHT](https://gitea.maximumdirect.net/eric/promptkit-backend-rakestrawhome/src/commit/993443d88c451901f4c917fa00c204fd3b54d28d/COPYRIGHT) |
+[LICENSE](https://gitea.maximumdirect.net/eric/promptkit-backend-rakestrawhome/src/commit/993443d88c451901f4c917fa00c204fd3b54d28d/LICENSE).
 
-Source: [Rakestrawhome catalog at the imported commit](https://gitea.maximumdirect.net/eric/promptkit-backend-rakestrawhome/src/commit/48918a3ad39fd99843cda94a86133b1b3881d596).
+[Source](https://gitea.maximumdirect.net/eric/promptkit-backend-rakestrawhome/src/commit/993443d88c451901f4c917fa00c204fd3b54d28d).
 
 ## jsonschema
 
 Selected module: `github.com/santhosh-tekuri/jsonschema/v6` at `v6.0.2`.
 
-No project-specific copyright statement was supplied in the selected source's
-LICENSE, README, or Go source files; none is invented here.
-
 SPDX-License-Identifier: Apache-2.0
 
 License and notices: [Apache 2.0](licenses/Apache-2.0.txt) |
-[upstream LICENSE](https://github.com/santhosh-tekuri/jsonschema/blob/29cbed948d24a04700eb94436416b18a07953b71/LICENSE).
+[LICENSE](https://github.com/santhosh-tekuri/jsonschema/blob/29cbed948d24a04700eb94436416b18a07953b71/LICENSE).
 
-Source: [jsonschema at the imported commit](https://github.com/santhosh-tekuri/jsonschema/tree/29cbed948d24a04700eb94436416b18a07953b71).
+[Source](https://github.com/santhosh-tekuri/jsonschema/tree/29cbed948d24a04700eb94436416b18a07953b71).
 
 ## Go Text
 
@@ -62,20 +77,17 @@ Selected module: `golang.org/x/text` at `v0.14.0` (transitive dependency).
 
 Copyright (c) 2009 The Go Authors. All rights reserved.
 
-Individual source files retain their additional year-specific Go Authors
-notices in the linked source tree.
-
 SPDX-License-Identifier: BSD-3-Clause
 
 License and notices: [BSD 3-Clause](licenses/BSD-3-Clause.txt) |
-[upstream LICENSE](https://github.com/golang/text/blob/6c97a165dd661335ff7bce6104a008558123c353/LICENSE) |
-[additional patent grant](https://github.com/golang/text/blob/6c97a165dd661335ff7bce6104a008558123c353/PATENTS).
+[LICENSE](https://github.com/golang/text/blob/6c97a165dd661335ff7bce6104a008558123c353/LICENSE) |
+[PATENTS](https://github.com/golang/text/blob/6c97a165dd661335ff7bce6104a008558123c353/PATENTS).
 
-Source: [Go Text at the imported commit](https://github.com/golang/text/tree/6c97a165dd661335ff7bce6104a008558123c353).
+[Source](https://github.com/golang/text/tree/6c97a165dd661335ff7bce6104a008558123c353).
 
 ## Go YAML v3
 
-Selected module: `gopkg.in/yaml.v3` at `v3.0.1`.
+Selected module: `gopkg.in/yaml.v3` at `v3.0.1` (transitive dependency).
 
 Copyright (c) 2006-2010 Kirill Simonov
 
@@ -87,32 +99,28 @@ Copyright 2011-2016 Canonical Ltd.
 
 SPDX-License-Identifier: MIT AND Apache-2.0
 
-The licenses apply to different files, not an either/or choice. The upstream
-LICENSE identifies the libyaml-derived MIT files and the Apache-licensed
-remainder; NOTICE supplies the final copyright statement above.
+License and notices: [MIT](licenses/MIT.txt) |
+[Apache 2.0](licenses/Apache-2.0.txt) |
+[LICENSE](https://github.com/go-yaml/yaml/blob/f6f7691b1fdeb513f56608cd2c32c51f8194bf51/LICENSE) |
+[NOTICE](https://github.com/go-yaml/yaml/blob/f6f7691b1fdeb513f56608cd2c32c51f8194bf51/NOTICE).
+
+[Source](https://github.com/go-yaml/yaml/tree/f6f7691b1fdeb513f56608cd2c32c51f8194bf51).
+
+## Go YAML v4
+
+Selected module: `go.yaml.in/yaml/v4` at `v4.0.0-rc.6` (transitive dependency).
+
+Copyright 2006-2010 Kirill Simonov
+
+Copyright 2011-2019 Canonical Ltd
+
+Copyright 2025 The go-yaml Project Contributors
+
+SPDX-License-Identifier: MIT AND Apache-2.0
 
 License and notices: [MIT](licenses/MIT.txt) |
 [Apache 2.0](licenses/Apache-2.0.txt) |
-[upstream LICENSE and file scope](https://github.com/go-yaml/yaml/blob/f6f7691b1fdeb513f56608cd2c32c51f8194bf51/LICENSE) |
-[NOTICE](https://github.com/go-yaml/yaml/blob/f6f7691b1fdeb513f56608cd2c32c51f8194bf51/NOTICE).
+[LICENSE](https://github.com/yaml/go-yaml/blob/1c17b9cee72bf81ae73a8be50fbd7dd3a9985125/LICENSE) |
+[NOTICE](https://github.com/yaml/go-yaml/blob/1c17b9cee72bf81ae73a8be50fbd7dd3a9985125/NOTICE).
 
-Source: [Go YAML at the imported commit](https://github.com/go-yaml/yaml/tree/f6f7691b1fdeb513f56608cd2c32c51f8194bf51).
-
-## Standard Repository Policies
-
-Material: adapted standard policy documents under `docs/policy/`, with
-Promptkit-specific ownership, library boundaries, contributor guidance, and
-release/OSS conventions. These documents have been modified from the templates.
-
-No project-specific copyright statement is supplied by the standard policy
-repository's README or LICENSE; none is invented here.
-
-SPDX-License-Identifier: CC-BY-SA-4.0
-
-The adapted policy documentation retains these upstream terms; this does not
-change Promptkit's library grant.
-
-License and notices: [CC BY-SA 4.0](licenses/CC-BY-SA-4.0.txt).
-
-Source: maintainer-provided internal standard policy templates. The source
-repository is non-public; no public source or notice URL is available.
+[Source](https://github.com/yaml/go-yaml/tree/1c17b9cee72bf81ae73a8be50fbd7dd3a9985125).

docs/policy/agents.md

@@ -1,19 +1,20 @@
 # Agent Policy
 
-**Base Policy Version:** 1.1
+**Base Policy Version:** 1.3
 
-**Last Updated:** 2026-09-23
+**Last Updated**: 2026-09-27
+
+**Upstream Source:** [agents.md](https://gitea.maximumdirect.net/eric/policy/src/commit/d84a38ebab26f048cafbe59a2246700c35d29843/docs/policy/agents.md)
 
 ## Purpose
 
-Agents must follow these house rules before recommending, planning, or
-implementing repository changes.
+Agents must read and follow these rules.
 
 ## Implementation Discipline
 
-Write the simplest idiomatic code that satisfies the user's request.
-Simplify the mechanism, not the user's choices. Do not implicitly strengthen
-requirements, restrictions, or guarantees.
+**KEY PRINCIPLES:** Write the simplest idiomatic code that satisfies the user's
+request. Do not implicitly strengthen requirements, restrictions, or guarantees
+beyond what the user actually requested.
 
 **Keep implementation machinery proportionate.** Use straightforward,
 idiomatic code and introduce only the machinery needed to support the requested
@@ -28,41 +29,48 @@ operator and caller choice where policy has not been established. If an
 additional restriction appears advisable, present it as a decision rather than
 silently implementing it.
 
+**Do not invent guarantees.** Do not strengthen public contracts, guarantees,
+or invariants beyond those expressly requested by the user.
+
+**Use the standard library.** For example: in almost every case, the best
+approach to copying files is to use the standard library. Writing custom code to
+implement power-loss protection at the application level, or to guard against
+bad actors with privileged and concurrent access to the host's filesystem,
+is wasteful, unnecessary, and not idiomatic. Stick to the simple, standard, and
+idiomatic approach unless another path is expressly requested by the user.
+
+**An implementation detail is not repository policy.** Tests and documentation
+must not elevate incidental behavior into a durable guarantee or restriction
+unless that behavior was expressly selected as part of the contract.
+
+## Promptkit Contract Authority
+
+The following clarification preserves Promptkit's established distinction
+between implementation choices and authorized contracts.
+
 A correctness constraint must follow from the requested behavior or an
 established invariant, not from the convenience of the chosen implementation.
 Explain the specific failure it prevents and why a less restrictive
 implementation cannot satisfy the contract.
 
-**An implementation detail is not repository policy.** Tests and documentation
-must not elevate incidental behavior into a durable guarantee or restriction
-unless that behavior was expressly selected as part of the contract. Existing
-explicit contracts remain authoritative; changing or weakening one requires a
-deliberate decision rather than being inferred from this principle.
-
-Agent-authored plans, tests, documentation, and prior implementations are not
-evidence that an additional restriction was deliberately approved. Identify the
-authorizing requirement or decision; when that authority is unclear, surface
-the ambiguity rather than treating repetition as approval.
-
-**Do not invent guarantees.** Do not strengthen public contracts, guarantees,
-or invariants beyond those expressly requested by the user.
-
-**Use the standard library.** Prefer simple, idiomatic standard-library
-implementations when they satisfy the requested behavior. Do not add custom
-power-loss protection or defenses against privileged concurrent filesystem
-actors unless expressly required. Preserve existing repository contracts.
+Existing explicit contracts remain authoritative; changing or weakening one
+requires a deliberate decision. Agent-authored plans, tests, documentation,
+and prior implementations are not evidence that an additional restriction was
+deliberately approved. Identify the authorizing requirement or decision; when
+that authority is unclear, surface the ambiguity rather than treating repetition
+as approval.
 
 ## Git Commit Policy
 
-By default, create a commit after completing each coherent unit of work, using a
+By default, commit each completed, nonempty unit of work using a
 concise, plain-English message describing what changed. This policy is standing
 authorization to create those local commits; a separate user request is not
 required. An explicit user instruction to leave work uncommitted takes precedence.
 
 A unit of work is a focused, reviewable outcome, including its relevant tests and
-documentation. Do not commit after every intermediate edit or create empty commits.
+documentation.
 Complete the appropriate validation before committing. If work is incomplete or
-validation is blocked, report that state rather than presenting it as completed.
+validation is blocked, report that state accurately.
 
 Before committing:
 
@@ -70,10 +78,10 @@ Before committing:
    changes. Identify changes that predate the current unit of work.
 2. Exclude secrets, local environment files, generated junk, and unrelated changes.
 3. Stage only the files or hunks belonging to the completed unit. Use `git add .`
-   only when every included change belongs to that unit. Do not disturb unrelated
-   staged or unstaged work.
-4. Review `git diff --staged` and run appropriate checks for the change. Do not
-   repeat checks already passed for unchanged content merely to create a commit.
+   only when every included change belongs to that unit. Preserve unrelated
+   staged and unstaged work.
+4. Review `git diff --staged` and run appropriate checks for the change. Reuse
+   successful checks for unchanged content.
 5. Review `git log --oneline -n 10` and use
    `git commit -m "<concise plain-English commit message>"`.
 6. Report the commit identifier and any remaining uncommitted work.

docs/policy/architecture.md

@@ -1,15 +1,41 @@
 # Architecture Policy
 
-**Base Policy Version:** 1.0
+**Base Policy Version:** 1.3
 
-**Last Updated:** 2026-09-23
+**Last Updated**: 2026-09-27
 
-## Purpose
+**Upstream Source:** [architecture.md](https://gitea.maximumdirect.net/eric/policy/src/commit/d84a38ebab26f048cafbe59a2246700c35d29843/docs/policy/architecture.md)
 
-This document defines Promptkit's current high-level architecture and the
-durable boundaries that implementation changes must preserve. The
-[internal component overview](../internal/overview.md) inventories concrete
-implemented packages without redefining these rules.
+## Purpose And Ownership
+
+The adopted policy defines Promptkit's purpose and the architectural
+constraints contributors must follow. It owns system boundaries, responsibility
+and dependency rules, established invariants, and explicit non-goals.
+
+Describe the concrete package inventory and implementation mechanics in internal
+documentation. Link to canonical public contracts for their exact behavior and
+to ADRs for decision rationale.
+
+## Architectural Approach
+
+Hexagonal architecture is strongly recommended, including encapsulating external
+integrations and APIs within internal adapters. Keep domain and application
+logic independent of external integration details, and make dependency direction
+clear in the adopted policy.
+
+Implement that separation with proportionate, idiomatic code. Choose interfaces
+and package layout to serve the application's actual boundaries. Use adapters
+for collaborators with external integration responsibilities.
+
+## Adopted Constraints And Implemented Structure
+
+Architectural constraints govern current and future development. Record
+implemented structure accurately, proposals and implementation status in the
+roadmap, and significant decisions and rationale in ADRs. Describe a target
+structure as implemented when its changes land.
+
+Constraints must reflect deliberately selected requirements and decisions.
+Do not promote incidental implementation choices into architectural invariants.
 
 ## System Shape
 
@@ -25,23 +51,22 @@ The [internal component overview](../internal/overview.md) owns the inventory
 of implemented packages and their concrete responsibilities. This policy owns
 the boundaries and dependency rules those components must preserve.
 
-The internal engine assembles one immutable backend registry, one capacity manager,
-the internal repositories, renderer, validator, outbound client, and use-case
-runner. The registry contains validated maintained definitions plus engine-scoped
-consumer additions. The root facade translates public values and errors at the
-library boundary.
-The internal engine constructs the capacity manager from the registry's immutable
-policy snapshot, wraps the selected built-in or injected model client, and
-supplies bounded admission to the runner. The defaults and renderer depend on
-the domain model. Prompt-definition and profile repositories use the domain
-model, file catalog, and YAML decoder. The catalog adapter validates imported
-immutable maintained data, including its reserved namespace, before internal
-engine assembly supplies it to the profile package. Artifact reading uses the
-domain model and application-neutral defaults. Validation uses the domain model,
-file catalog, and JSON Schema implementation. The model client uses the domain
-model and application-neutral defaults, and an injected or standard-library HTTP
-client. The use-case runner depends on the narrow interfaces owned by each
-internal component, including backend lookup and run admission.
+The internal engine composes selected catalog and caller ConfigKit inputs once,
+then assembles the captured definitions, capacity manager, renderer, validator,
+outbound client, and use-case runner. The configuration adapter interprets and
+validates only the final effective values, including presence, null, and
+resource context. It retains source history for explicit operator inspection,
+not for validation or a second resolution pass. The root facade translates
+public values and errors at the library boundary.
+
+The engine constructs capacity policy from final backend definitions, wraps
+the selected built-in or injected model client, and supplies bounded admission
+to the runner. Runtime/domain components consume execution-owned values, not
+ConfigKit types. Artifact reading and validation use the domain model and
+application-neutral defaults; validation also uses file-catalog helpers and
+JSON Schema. The model client uses the domain model, defaults, and an injected
+or standard-library HTTP client. The runner coordinates narrow lookup and
+collaborator interfaces without rereading configuration.
 
 The current implementation follows this dependency direction:
 
@@ -58,9 +83,10 @@ downstream consumers, including Scriptorium
         narrow injected abstractions
 ```
 
-The backend registry depends on the domain model and shared JSON-value
-validation, has no mutation API after construction, and consumes the
-OpenAI-compatible reserved request-field rule owned by the model client. The
+The backend index depends on the domain model and shared JSON-value ownership
+and has no mutation API after construction. The configuration adapter applies
+the OpenAI-compatible reserved request-field rule owned by the model client
+when it validates final provider maps. The
 capacity component depends on the domain model and the narrow internal
 model-client boundary, not on provider transport implementation. The model
 client does not depend on registry or capacity configuration. The facade
@@ -155,3 +181,21 @@ state.
 Do not list planned packages as implemented components. When implementation
 introduces a package, update the internal inventory and the owning contract or
 subsystem document in the same change.
+
+## Trust Boundaries And Threat Scope
+
+Where useful, state the trust boundaries and threat scenarios relevant to the
+application's adopted requirements, along with scenarios it explicitly excludes.
+For example, distinguish handling untrusted application input from defending
+against a privileged actor concurrently modifying the host filesystem.
+
+Threat exclusions define the scope of the adopted requirements. Base defenses
+and guarantees on those requirements and raise unsettled scope for a deliberate
+decision under the [agent policy](agents.md).
+
+Keep this discussion proportionate to the application. A separate threat
+assessment or security document is optional when adopting this template.
+For this library, the framework format and integration documents own credential
+supply and external contracts; internal documents own implementation mechanisms.
+Consumer-specific filesystem and security policy remains outside Promptkit's
+boundary as described above.

docs/policy/documentation.md

@@ -1,157 +1,139 @@
 # Documentation Policy
 
-**Base Policy Version:** 1.5
+**Base Policy Version:** 1.11
 
-**Last Updated:** 2026-09-26
+**Last Updated**: 2026-09-27
+
+**Upstream Source:** [documentation.md](https://gitea.maximumdirect.net/eric/policy/src/commit/d84a38ebab26f048cafbe59a2246700c35d29843/docs/policy/documentation.md)
 
 ## Purpose
 
-This policy assigns each Promptkit documentation topic to one canonical owner.
-Its goal is to keep documentation for this reusable Go library accurate,
-concise, discoverable, and resistant to drift for consumers, contributors,
-maintainers, integrators, and coding agents.
+This policy assigns each documentation topic to one canonical owner. Its goal is
+to keep this library's documentation accurate, concise, discoverable, and resistant
+to drift for users, operators, developers, integrators, and LLM coding agents.
 
 ## Core Rules
 
 ### One Canonical Owner
 
-Each authoritative fact belongs in one document or source form. A non-owning
-document may give a short, stable summary for orientation, but it must link to
-the canonical owner instead of repeating exact contracts.
+Each authoritative fact belongs in one document. A non-owning document may give
+a short, stable summary for orientation, but it must link to the canonical owner
+for volatile details.
 
-Volatile details include exported declarations, accepted inputs, defaults,
-schemas, file names, paths, error identities, retry behavior, and runtime
-guarantees. If readers could reasonably treat a statement as a contract,
-maintain its exact definition only in the owning source.
+Volatile details include commands, flags, configuration fields and defaults,
+module keys, schemas, file names, paths, status codes, retry behavior, and
+runtime guarantees. If readers could reasonably treat a statement as a
+contract, maintain it only in the owning document.
 
-### Current State, Decisions, And Future Work
+### Current And Future Behavior
 
 Outside `docs/roadmap/`, documentation describes implemented behavior only.
 Partial features may be described only to their implemented boundary.
 
-An accepted architecture decision may describe an approved direction before it
-is implemented, but acceptance is not evidence that the behavior exists.
-Current-state documents change when the implementation lands. Temporary
-roadmaps own future work, sequencing, and implementation status; they do not
-replace durable policies or current contracts.
+Architectural constraints may govern future changes. Describe current structure
+from implemented behavior.
+
+ADRs may record an accepted architectural decision before implementation. The
+roadmap owns implementation status and sequencing until the decision is
+implemented. Current architecture, user, operator, integration, and internal
+documentation are updated when the behavior lands.
 
 ### Audience And Detail
 
 Write for the document's stated audience and include only the detail needed for
-its owned topic. Consumer guidance should not expose incidental implementation
-detail. Contributor documentation should link to public contracts and durable
-policies instead of restating them.
+its owned topic. Keep user and operator docs focused on using and operating the
+application. Developer docs should link to user-facing and external contracts
+for their definitions.
 
-### Links
+### Examples
 
-Use descriptive link text and repository-relative links for repository
-documents. Link to the canonical owner rather than to a duplicate summary.
-Check every added or changed link and repair or remove links when their target
-moves or is retired.
+Complete copyable files belong in `examples/`. Documentation may use the
+smallest illustrative snippet needed to explain its owned topic, but should link
+to maintained examples for complete copyable files.
 
-### Examples And Code Fences
-
-Complete copyable files belong in `examples/` when maintained examples exist.
-Documentation may use the smallest illustrative snippet needed for its owned
-topic, but should link to a maintained example instead of embedding a second
-complete copy.
-
-Examples must be valid, secret-free, and tested where practical. Commands,
-imports, and Go snippets must match the implemented library. Use a language tag
-on fenced code blocks and make clear when a fragment is illustrative rather
-than directly runnable.
+Examples must be valid, secret-free, and tested where practical. Commands and
+configuration used in documentation should match the application.
 
 ### Security And Privacy
 
 Documentation and examples must not contain real credentials, private keys,
-private environment dumps, sensitive source material, or private
-infrastructure details unless intentionally public. Document secret-handling
-mechanisms, not secret values.
+private environment dumps, sensitive source material, or private infrastructure
+details unless intentionally public. Document secret-handling mechanisms, not
+secret values.
 
 ## Canonical Ownership
 
 | Topic | Canonical owner | Owned content | Content owned elsewhere |
 | --- | --- | --- | --- |
-| Project orientation | `README.md` | What Promptkit is, its current usability, module identity, license summary, a minimal successful quickstart, and links onward. | Exact API contracts, contributor procedures, architecture detail, and release steps. |
-| Contributor workflow | `docs/development.md` | Task-oriented reading guide, local workflow, validation commands, and repository hygiene. | Architecture rules, API semantics, subsystem behavior, and release procedure. |
-| Current architecture | `docs/policy/architecture.md` | System shape, normative ownership, dependency direction, package boundaries, invariants, and non-goals. | Concrete component inventory, implementation mechanics, contributor procedures, decision history, and future work. |
-| Agent policy | `docs/policy/agents.md` | Agent implementation discipline, proportionality, idiomatic simplicity, local commit authorization and discipline, and rules against inventing restrictions, guarantees, or repository policy. | Public contracts, architecture, testing, and contributor procedures. |
-| Documentation organization | `docs/policy/documentation.md` | Documentation ownership, audience boundaries, maintenance rules, and document lifecycle. | Library architecture or runtime behavior. |
-| Testing policy | `docs/policy/testing.md` | Test philosophy, risk-based sufficiency, test boundaries, doubles, coverage guidance, regression policy, and test maintenance. | Subsystem behavior, exact public contracts, subsystem-specific test inventories, and implementation plans. |
-| Release policy | `docs/policy/release.md` | Versioning, compatibility, release-note requirements, validation obligations, immutability, recovery, and adoption scope. | Executable commands, publication mechanics, and historical release summaries. |
-| Licensing and attribution policy | `docs/policy/oss.md` | Project licensing conventions, attribution format, text and notice-link rules, discoverability, maintenance, and concrete exceptions. | Component entries, license texts, release commands, and dependency security review. |
-| Project grant | `COPYRIGHT` | Project identity, holders and years, SPDX expression, grant, warranty disclaimer, and third-party statement. | Complete license texts and component attribution. |
-| Project license texts | `LICENSE` | Complete project license and incorporated companion texts. | General licensing policy and dependency attribution. |
-| Upstream attribution | `docs/oss/attribution.md` | Component names, copyright statements, license identification, and license, notice, and source links. | General policy and complete standard texts. |
-| Standard dependency license texts | `docs/oss/licenses/` | Complete, verbatim texts shared by attribution entries. | Project-specific notices, attribution prose, and policy interpretation. |
-| Release procedure | `docs/release.md` | Maintainer prerequisites, candidate preparation, concrete publication guards and commands, verification, and recovery steps. | Release-policy requirements, public API semantics, and historical summaries. |
+| Product orientation and minimal end-to-end quickstart | `README.md` | Purpose, value, shortest successful invocation, and navigation, including licensing and attribution. | Complete command reference, configuration reference, operational procedures, implementation detail. |
+| Contributor entry point | `docs/development.md` | Task-oriented reading guide, contributor orientation, baseline validation commands, and canonical links. | Package inventory, architecture rules, subsystem behavior, detailed change recipes. |
+| Application architecture policy | `docs/policy/architecture.md` | System shape, normative ownership, dependency direction, boundaries, invariants, safety properties, and non-goals. | Concrete package inventory, implementation mechanics, contributor procedures, decision history, future work. |
+| Policy-set provenance and upstream navigation | `docs/policy/meta.md` | Policy-set origin, local authority, adoption baselines, and upstream adoption and update links. | Task-specific reading triggers, detailed adoption procedures, and formal attribution notices. |
+| Agent policy | `docs/policy/agents.md` | Proportionate, idiomatic implementation; rules against inventing requirements, restrictions, guarantees, or policy. | Application contracts, architecture, testing policy, and contributor procedures. |
+| Documentation policy | `docs/policy/documentation.md` | Documentation ownership, audience boundaries, maintenance rules, and ADR/document lifecycle. | Application architecture or product behavior. |
+| Testing policy | `docs/policy/testing.md` | Test philosophy, risk sufficiency, boundaries, doubles, coverage, regressions, and test maintenance. | Subsystem behavior, application contracts, subsystem-specific test inventories, and implementation plans. |
+| Release policy | `docs/policy/release.md` | Versioning, compatibility, release integrity and immutability, release documentation, proportionate gates, publication controls, completion, and required versus optional checks. | Repository-specific commands, product installation guidance, CLI version semantics, historical release summaries, and CI implementation detail. |
+| Open source licensing and attribution policy | `docs/policy/oss.md` | License defaults and author choices, COPYRIGHT and attribution formats, license/notice links, discoverability, maintenance, and concrete exceptions. | Component entries, license texts, release commands, and dependency security review. |
+| Project copyright and license grant | `COPYRIGHT` | Project identity, copyright holders and years, SPDX expression, grant, warranty disclaimer, and third-party statement. | Complete license texts and upstream component attribution. |
+| Project license texts | `LICENSE` | Complete project and incorporated companion license texts, with required project-specific fields. | General licensing policy and upstream component attribution. |
+| Upstream component attribution | `docs/oss/attribution.md` | House Format component entries: identity, material scope and modifications where applicable, copyright, license, required notices, and license, notice, and source links. | General attribution policy, exception reasoning, research narratives, compliance commentary, and complete standard license texts. |
+| Standard dependency license texts | `docs/oss/licenses/` | Complete, verbatim standard license texts shared by applicable entries. | Project-specific upstream notices, attribution prose, and policy interpretation. |
+| Repository-specific release procedure | `docs/release.md` | Maintainer prerequisites, candidate preparation, validation and publication commands and automated guards, asynchronous deliverables, delivery status, optional consumer verification, and recovery. | General release requirements, product installation guidance, historical release summaries, and current compatibility contracts. |
+| Consumer guidance for the public Go API (if applicable) | `docs/consumers/` | Task-oriented public Go API usage, minimal examples, and consumer responsibilities. | HTTP wire semantics, external protocol contracts, internal implementation detail. |
+| Integration contracts for external components (if applicable) | `docs/integrations/` | External formats and protocols, upstream and downstream contracts, logical output paths and schemas, media types, and compatibility. | Physical runtime placement and lifecycle, internal transformations, CLI syntax, configuration defaults. |
+| Inventory of implemented internal packages | `docs/internal/overview.md` | Implemented packages and components, responsibilities, and links to focused internal docs. | Normative architecture, contributor reading policy, external contracts. |
+| Behavior and architecture of internal packages | Other files under `docs/internal/` | Implementation flow, collaborators, state transitions, package-local guarantees and failures, and relevant tests. | Global architecture invariants, configuration definitions and defaults, external schemas, operator procedures. |
+| Architectural decision records | `docs/adr/` | Significant decisions, context, alternatives, rationale, consequences, and supersession history. | Current behavior reference, implementation status, task sequencing. |
+| Future work and implementation status | `docs/roadmap/` | Proposed, accepted, deferred, or rejected work; implementation status, sequencing, and task breakdowns. | Implemented behavior reference and architectural decision rationale. |
+| Release-note history | `docs/releases/` | One checked-in summary per source release under the procedure; the note at its immutable tag is the release record. | Current commands, behavior, contracts, and compatibility definitions. |
+| Complete copyable artifacts | `examples/` | Maintained configuration, inputs, and other copyable or runnable files. | Field-by-field reference, command reference, prose explanation. |
 | Exact exported Go API | Go declarations and GoDoc, as APIs are implemented | Exported names, signatures, types, values, errors, and exact behavioral contracts. | Task-oriented consumer walkthroughs, implementation details, and future API proposals. |
 | Framework file formats | `docs/formats.md` | Prompt-definition and profile YAML fields, schema references, defaults, validation modes, built-in profiles, credentials, and file-to-request precedence. | Exported Go declarations, outbound wire behavior, internal parsing mechanics, and application configuration. |
-| Consumer guidance | `docs/consumers/`, when consumer workflows require dedicated guidance | Task-oriented use of implemented public APIs, minimal examples, and consumer responsibilities. | Exact exported declarations and internal mechanics. |
-| Durable integration contracts | `docs/integrations/`, when integrations exist | External formats and protocols, compatibility behavior, and upstream or downstream responsibilities. | Internal transformations and public Go declarations. |
-| Release-note history | `docs/releases/` | Mandatory version-matched historical summaries for releases made under the adopted release policy; the note at the immutable tag records that release. | Current APIs, behavior, formats, compatibility contracts, and release procedures. |
-| Implemented component inventory | `docs/internal/overview.md` | Current packages and components, their implemented responsibilities, and links to focused internal documents. | Normative architecture, contributor workflow, external contracts, and proposed components. |
-| Internal subsystem behavior | Other files under `docs/internal/`, when a subsystem needs durable detail | Implementation flow, internal collaborators and state transitions, package-local guarantees and failures, and relevant tests. | Global architecture invariants, public API definitions, and future package plans. |
-| Architectural decision history | `docs/adr/`, when repository-local decisions require records | Significant decisions, context, alternatives, rationale, consequences, and supersession history. | Current behavior reference, implementation status, and task sequencing. |
-| Temporary feature roadmaps | `docs/roadmap/`, while planned work needs coordination | Proposed or accepted scope, sequencing, gates, and implementation status. | Implemented behavior reference and durable decision rationale. |
-| Complete copyable artifacts | `examples/` | Valid inputs, Go programs, and other files intended to be copied or run. | Field-by-field reference, exact API declarations, and prose explanation. |
 
-Conditional owners do not require placeholder files or directories. Create a
-consumer, integration, release, subsystem, ADR, roadmap, or example document
-only when the corresponding implemented interface, release, decision, planned
-effort, or maintained artifact exists.
+Create supporting documents for existing interfaces and responsibilities when
+substantive content is available.
 
 ## Boundary Rules
 
 ### Orientation
 
-The README owns project orientation. The development guide routes
-contributors. Architecture owns normative structure. The internal overview
-owns the current concrete component map. These documents may link to one
-another but must not maintain parallel package or behavior descriptions.
+Link among orientation, architecture, and internal documents; maintain each
+package or behavior description in its canonical owner.
 
 ### Public Contracts And Implementation
 
-Go declarations and GoDoc own exact exported API contracts once those APIs
-exist. Consumer and integration documents explain how to use those contracts
-for a task. Internal documents explain how Promptkit implements them. Internal
-documentation may identify a public type or external format as a dependency,
-but must link to its canonical definition rather than restate it.
+Go declarations and GoDoc own exact exported Go API contracts. The
+[framework format reference](../formats.md) owns prompt, profile, and schema
+formats; integration documents own external wire behavior. Consumer and
+internal documents link to those owners for exact definitions.
 
-The [framework format reference](../formats.md) owns exact prompt, profile, and
-schema-file contracts. Integration documents own external wire formats.
+### Releases
 
-### Release Documentation
+The release policy defines requirements and invariants that every release must
+satisfy. The repository-specific release procedure defines the commands and
+workflow maintainers use to satisfy that policy. Release notes record history
+at immutable tags. Maintain current behavior in its canonical documentation,
+update it with the corresponding behavior changes, and keep release procedures
+consistent with adopted policy.
 
-The [release policy](release.md) owns release requirements; the
-[repository release procedure](../release.md) owns their concrete execution.
-Version-matched checked-in notes are required for future releases under that
-policy. The source tag is the release identity, and the note in its immutable
-tree is the historical summary; annotated tag messages complement that record.
+### Project Licensing And Upstream Attribution
 
-Release notes do not own current API or behavior contracts. Link to the
-canonical owners for details instead of reproducing those contracts. Published
-notes are not disposable guidance and must not be replaced under the same
-version. Corrections belong in a subsequent release.
+README and release documents link to the canonical licensing and attribution
+materials under the [OSS policy](oss.md). The release procedure owns URL
+construction and publication mechanics.
 
-Adoption is prospective. Previously published tags and historical notes retain
-their original records and are not reformatted or rewritten to satisfy the new
-requirements.
+### Contracts And Implementation
 
-### Project Licensing And Attribution
-
-The [OSS policy](oss.md) owns licensing conventions, the attribution House
-Format, and README/release navigation. COPYRIGHT owns the project grant;
-LICENSE supplies complete texts. Component-specific information belongs in
-attribution entries, not parallel README or release-note notice lists. The
-release procedure owns concrete footer URLs and publication mechanics.
+Integration and API documents define externally observable shapes and
+semantics. Internal documents explain how this application implements or consumes those
+contracts. Internal docs may name a field, file, or protocol to identify a
+dependency, but must link to its canonical contract for the definition.
 
 ### Security Topics
 
 This policy owns what documentation and examples may contain. Architecture owns
-library security boundaries and invariants. Public declarations and integration
-documents own consumer-visible security contracts. Internal documents own
-implementation mechanisms only.
+library security boundaries. Public declarations and integration documents own
+consumer-visible contracts; internal documents own implementation mechanisms.
 
 ## Architecture Decision Records
 
@@ -166,31 +148,35 @@ Use sequentially numbered ADR filenames such as
 6. alternatives considered;
 7. consequences.
 
-Use one of these statuses:
+Treat the decision content of an accepted ADR as immutable. When a decision
+changes, create a new ADR and update the earlier ADR's status to superseded.
+Rejected architectural alternatives belong in the ADR; rejected product ideas
+belong in the roadmap.
 
-- **Proposed:** the decision is under consideration and may change;
-- **Accepted:** the decision is approved, whether or not implementation is
-  complete;
-- **Rejected:** the proposed decision was considered and not adopted;
-- **Superseded:** a later accepted ADR replaces the accepted decision.
+## Maintenance
 
-A proposed ADR transitions to Accepted or Rejected. An Accepted ADR transitions
-to Superseded only when a later Accepted ADR replaces it. An ADR may be created
-as Accepted when the decision has already been made.
+When behavior changes, update its canonical owner in the same change. If
+ownership moves, remove the old definition and replace it with a link where
+navigation remains useful.
 
-Treat the decision content of an Accepted ADR as immutable. A changed decision
-requires a later ADR rather than a rewrite of the accepted record. A Superseded
-ADR must link to its replacement, and the replacement must link back. Rejected
-architectural alternatives belong in the ADR; rejected feature ideas belong in
-a roadmap when they need to be retained.
+Before completing documentation work:
+
+- verify affected behavior and examples;
+- check commands, flags, fields, defaults, schemas, and paths against their
+  implementation;
+- keep unimplemented behavior in the roadmap, subject to the ADR exception;
+- remove stale references and validate links;
+- confirm that non-owning documents summarize and link rather than redefine;
+- confirm that no secrets or sensitive private data were added.
+
+## Promptkit Documentation Scope
+
+Promptkit is a Go library, so exported GoDoc and framework formats replace
+application CLI, configuration, operations, and HTTP-service owners. Reading
+triggers belong in the development guide, not this topic map.
 
 ## Document Lifecycle
 
-Create durable current-state documentation with the implementation it
-describes. Update its canonical owner in the same change when behavior changes.
-If ownership moves, remove the old definition and leave a link where navigation
-remains useful.
-
 Roadmaps are temporary coordination documents. When their work is complete,
 record completion, move any still-useful decisions or contracts to their
 durable owners, update incoming links, and archive or remove the roadmap
@@ -200,13 +186,9 @@ second current-state reference.
 Retain release notes as historical records under the release policy. Do not
 apply temporary-roadmap retirement rules to published release notes.
 
-Before completing documentation work:
-
-- verify affected behavior and examples;
-- check commands, imports, declarations, defaults, schemas, and paths against
-  their implementation;
-- keep unimplemented behavior in a roadmap, subject to the ADR exception;
-- validate links and fenced examples;
-- confirm non-owning documents summarize and link rather than redefine;
-- remove stale or unsupported claims; and
-- confirm that no secrets or sensitive private data were added.
+For Promptkit ADRs, retain the existing Proposed, Accepted, Rejected, and
+Superseded statuses. Proposed records may become Accepted or Rejected;
+Accepted records may become Superseded, with links between the earlier record
+and its replacement. Records may be created as Accepted when the decision has
+already been made. These lifecycle rules preserve existing local document
+semantics.

docs/policy/meta.md

@@ -0,0 +1,27 @@
+# Policy Set Provenance
+
+**Base Policy Version:** 1.0
+
+**Last Updated**: 2026-09-27
+
+**Upstream Source:** [meta.md](https://gitea.maximumdirect.net/eric/policy/src/commit/d84a38ebab26f048cafbe59a2246700c35d29843/docs/policy/meta.md)
+
+## Origin And Local Authority
+
+This repository's policy set is adapted from
+[Standard Repository Policies](https://gitea.maximumdirect.net/eric/policy).
+The adopted local policies govern work in this repository. Upstream revisions
+become local policy through deliberate adoption, preserving local decisions.
+Each policy's `Upstream Source` identifies its adopted baseline.
+
+## Adoption And Updates
+
+For policy adoption, upstream revision reviews, and updates, consult the
+[upstream adoption and update guide](https://gitea.maximumdirect.net/eric/policy/src/branch/main/docs/adoption.md).
+That guide and the reference example collection are maintained upstream and
+accessed through links. Keep discovery links pointed at the current upstream
+project and guide; keep adopted-source and example links pinned to commits.
+
+The local [developer guide](../development.md) routes tasks to applicable
+policies. Formal credit and licensing notices for the copied policy material
+belong in the local [attribution document](../oss/attribution.md).

docs/policy/oss.md

@@ -1,135 +1,227 @@
 # Open Source Licensing And Attribution Policy
 
-**Base Policy Version:** 1.2
+**Base Policy Version:** 1.8
 
-**Last Updated:** 2026-09-26
+**Last Updated**: 2026-09-27
 
-Adapted from the standard policy; see [provenance and licensing](../oss/attribution.md#standard-repository-policies).
+**Upstream Source:** [oss.md](https://gitea.maximumdirect.net/eric/policy/src/commit/d84a38ebab26f048cafbe59a2246700c35d29843/docs/policy/oss.md)
 
 ## Purpose And Scope
 
-This policy defines Promptkit's project licensing conventions and House Format
-for upstream attribution. It covers relevant incorporated or distributed
-components, including transitive dependencies and copied code, documentation,
-or assets. Treatment follows the component's terms and actual use, not merely
-its direct-dependency status or common ownership. Development tools do not
-automatically require attribution.
+This policy defines project licensing conventions and a repeatable House Format
+for upstream attribution and license notices. It covers the project's own code
+and upstream components incorporated into or distributed with the application
+or library, including relevant transitive dependencies and copied code,
+documentation, or assets.
+Determine treatment from the component's terms and actual use.
 
-Promptkit is a Go library with an author-selected LGPL-3.0-or-later grant in
-[COPYRIGHT](../../COPYRIGHT). Its public source repository is
-`https://gitea.maximumdirect.net/eric/promptkit`; it publishes source-only Go
-module releases through annotated tags, not binaries or separate hosted release
-pages. The [release procedure](../release.md) owns publication mechanics.
+Consulting development guidance or using tooling alone does not require an
+attribution entry. Copying or adapting documentation for inclusion in the
+repository is different: preserve its applicable attribution and license terms.
+A material's role as development guidance does not exempt copied documents.
+Apply any express permissions for attribution-free reuse of example formatting.
 
-The House Format does not establish license compatibility or resolve every
-obligation arising from use or distribution. Adoption does not relicense
-existing material or override third-party terms.
+The baseline is a publicly available source repository with releases published
+alongside it. The format is independent of language, forge, and build system.
+It does not require attribution for every development tool, establish license
+compatibility, or resolve every obligation arising from use or distribution.
 
 ## Canonical Locations
 
 The [documentation policy](documentation.md) assigns ownership:
 
-- `COPYRIGHT`: project name, holders and years, SPDX expression, grant,
-  warranty disclaimer, and statement about third-party material.
-- `LICENSE`: complete, unmodified project license texts, including incorporated
-  companion text. Promptkit includes LGPLv3 followed by GPLv3.
+- `COPYRIGHT`: project name, copyright statements, SPDX expression, grant,
+  warranty disclaimer, and third-party statement.
+- `LICENSE` contains the complete, unmodified project license text, including
+  incorporated companion text. Dependency attribution does not relicense the project.
 - `docs/oss/attribution.md`: canonical component entries.
-- `docs/oss/licenses/`: complete, verbatim standard dependency texts, including
-  companions where applicable. Shared texts can serve multiple entries.
+- `docs/oss/licenses/`: complete, verbatim standard and applicable companion texts.
 
-Keep explanations and project-specific notices outside standard texts. Preserve
-distinct versions and exceptions, using recognizable filenames.
+Use recognizable license filenames, such as `Apache-2.0.txt` or `LGPL-3.0.txt`.
+A shared standard text may serve multiple entries. Keep explanations outside
+license texts and preserve distinct versions and exceptions.
+
+## Upstream Reference Examples
+
+Use the commit-pinned upstream examples to create actual project notices.
+Retain their links and keep the example collection upstream; keep applicable
+license texts locally as specified above.
 
 ## Project Licensing
 
-The house defaults for new projects are GPL-3.0-or-later for applications and
-LGPL-3.0-or-later for libraries. An author's explicit choice takes precedence
-without an exception rationale, extra approval, or compensating controls.
-Promptkit retains its selected library grant; do not infer different licenses
-for individual packages or relicense existing code by adopting this policy.
+Unless the author specifies otherwise, use **GPL version 3 or later**
+(`GPL-3.0-or-later`) for applications and **LGPL version 3 or later**
+(`LGPL-3.0-or-later`) for libraries. An author's explicit choice takes precedence:
+for example, a one-off script may use MIT. Such a choice requires no exception
+rationale, additional approval, or compensating controls under this policy.
 
-Keep COPYRIGHT, LICENSE, SPDX expressions, and README descriptions consistent.
-Use accurate holders and years; do not assume the maintainer owns every
-contribution or advance years automatically. Update grant, disclaimer, and text
-references together when the author deliberately changes licensing. Preserve
-third-party terms and required existing notices. No blanket per-file header
-requirement is introduced.
+These defaults guide new license selection. Adopting this policy does not
+relicense existing code or override third-party terms. Preserve an existing
+license unless the author deliberately changes it. For mixed-purpose projects,
+follow the author's selected scope rather than inferring different licenses for
+individual packages.
+
+Use the upstream [application COPYRIGHT example](https://gitea.maximumdirect.net/eric/policy/src/commit/a469273adda336625f96b9d769ea27b33999f146/examples/licensing/application/COPYRIGHT)
+or [library COPYRIGHT example](https://gitea.maximumdirect.net/eric/policy/src/commit/a469273adda336625f96b9d769ea27b33999f146/examples/licensing/library/COPYRIGHT)
+to create the project’s root `COPYRIGHT` file.
+Use verified project names, contribution years, and copyright holders.
+For another selected license, adapt the grant, SPDX expression, disclaimer, and
+text references together to reflect the author's selected grant.
+
+For GPLv3 projects, copy the complete GPLv3 text into `LICENSE`. For LGPLv3
+projects, place the complete LGPLv3 text followed by the complete GPLv3 text in
+`LICENSE`; the LGPL incorporates the GPL terms. Keep the texts unmodified and
+place project-specific statements in `COPYRIGHT`. For the default grants, the
+grant and SPDX expression in `COPYRIGHT` must expressly identify `or-later`;
+follow the author’s choice if a different grant is selected.
+
+For other licenses, provide their complete text and any required project-specific
+fields; the standard reference collection remains unchanged. Keep `COPYRIGHT`,
+`LICENSE`, SPDX expressions, and README descriptions consistent with the actual
+grant. This convention introduces no blanket requirement for per-file headers;
+preserve notices or add them where the applicable terms require them.
+
+Identify separately licensed documentation or assets in the project grant, with
+links to their attribution and license information. An application's default
+code license does not override the terms of incorporated documentation.
 
 ## Upstream Attribution House Format
 
-Each component entry contains five fields:
+Begin `docs/oss/attribution.md` with `# Open Source Attribution Notices`,
+followed directly by component entries. These comprise the complete document.
 
-1. Project name, normally as the heading.
-2. Upstream copyright statements, preserving their wording.
-3. Applicable SPDX license identifier or expression.
-4. License and notice links.
-5. Source repository link at the exact imported commit.
+Each entry presents these five fields in order, with blank lines between them:
 
-These are fields, not a line limit. Include multiple statements or links where
-needed. Do not invent absent copyright statements or SPDX identifiers. Describe
-nonstandard terms through their linked text, preserve alternatives and
-exceptions, and record a selected option when relevant. Do not silently resolve
-an unsettled licensing choice.
+1. **Project name** as a level-two heading. An optional identification paragraph
+   may follow, such as `Selected module: MODULE at VERSION.` with the module and
+   version in backticks. For copied documentation, a concise `Material:` sentence
+   may identify the affected files and whether they were adapted or copied
+   without modification. A factual qualifier such as `(transitive dependency)`
+   is permitted. Limit optional identification prose to factual component and
+   material scope.
+2. **Upstream copyright statement or statements**, preserving their wording.
+   Put multiple statements in separate paragraphs. Include this field when the
+   selected upstream source supplies an applicable statement; otherwise, omit it.
+3. **SPDX license identifier or expression**, when applicable, using
+   `SPDX-License-Identifier: EXPRESSION`.
+4. **License and notice links**, beginning `License and notices:`, separated
+   by ` | `, and ending with a period. Label local standard texts by license
+   name, such as `MIT` or `Apache 2.0`. Label upstream files by their actual
+   filenames, such as `COPYRIGHT`, `LICENSE`, `NOTICE`, or `PATENTS`.
+5. **Source repository link**, rendered exactly as:
+
+   ```markdown
+   [Source](COMMIT_URL).
+   ```
+
+Use the upstream [attribution example](https://gitea.maximumdirect.net/eric/policy/src/commit/a469273adda336625f96b9d769ea27b33999f146/examples/licensing/attribution.md)
+to create the project’s `docs/oss/attribution.md`.
+The example illustrates omitted fields and multiple copyrights and licenses.
+Replace the uppercase placeholders and illustrative URLs with actual component
+information. Local license links are relative to the destination
+`docs/oss/attribution.md`; copy the applicable texts into its `licenses/`
+directory. Do not copy example entries for components the project does not use.
+
+These are five fields, not a line limit. Omit the SPDX field when no applicable
+identifier exists; identify nonstandard terms through the linked text. Preserve
+licensing alternatives and exceptions, and record a selected option when
+relevant through the factual license identification. Do not invent an identifier
+or silently resolve an unsettled licensing choice.
+
+Keep entries factual. Do not add agent-authored explanations of license
+expressions, file-level license scope, research performed, retained source
+notices, or compliance conclusions. Avoid filler such as "none is invented
+here" and embellished link labels such as "upstream LICENSE", "additional
+patent grant", or "at the imported commit". Preserve actual required upstream
+content; this rule excludes editorial additions, not required notices. Policy
+interpretation and exception reasoning belong in the adopted OSS policy or an
+appropriate decision record, not the attribution document.
 
 ## License Texts And Upstream Links
 
-Link standard texts to local copies. Link project-specific notices to the
-upstream copies at the exact commit corresponding to the imported version or
-copied material. Moving branches and version tags are not substitutes for
-commit-specific component links.
+Link standard license texts to their local copies. Link project-specific
+notices to their upstream copies. Every upstream repository or notice link must
+identify the exact commit corresponding to the
+imported version, including the selected source revision for copied material.
 
-Classify material by content, not filename: an upstream LICENSE or COPYING can
-mix standard text with project-specific notices or exceptions. Link both when
-needed. Make incorporated companion texts directly reachable from each entry.
+Classify material according to its contents. An upstream `LICENSE`,
+`COPYING`, or similar file may contain project-specific notices or exceptions
+in addition to standard wording. Link both the local standard text and the
+commit-specific upstream file when needed. Make companion license texts directly
+reachable from the entry.
 
-For project-specific license and attribution material, direct upstream links
-are accepted as satisfying reproduction, inclusion, or copy requirements under
-the adopted house interpretation. Do not add local-copy requirements or request
-repeated approval solely because a license uses those terms. This concerns
-notice reproduction, not other concrete obligations such as marking modified
-files or supplying corresponding source. Central entries do not authorize
-stripping required notices from incorporated source.
+For project-specific license and attribution material, this policy accepts
+direct links to the applicable upstream texts as satisfying reproduction,
+inclusion, or copy requirements. This is the adopted house interpretation.
+Agents must apply it without adding local-copy requirements or seeking repeated
+approval solely because a license uses those terms.
+
+This interpretation concerns notice reproduction. Concrete obligations such as
+marking modified files or supplying corresponding source receive their own
+applicable treatment. Preserve required notices already present in incorporated
+source files; the central attribution entry does not authorize stripping them.
 
 ## Discoverability
 
-End README with friendly statements linking to the actual grant in COPYRIGHT
-and to the attribution document. Each new checked-in release note ends with
-links whose visible text is `COPYRIGHT | LICENSE | ATTRIBUTION`, using absolute
-URLs at the release's immutable tag or corresponding immutable source revision.
-These release links differ from imported-component links, which use commits.
+End the project's README with two friendly statements linking to its actual
+grant in `COPYRIGHT` and the attribution document. For example, for a project
+with the stated license:
 
-The release procedure owns concrete URL construction. If a hosted download page
-is deliberately introduced, reuse the checked-in note and preserve its footer
-there. This convention does not require a new hosted page, downloadable license
-assets, source bundles, or another packaging format. Do not maintain duplicate
-notice lists.
+```markdown
+PROJECT_NAME is licensed under the [LGPL v3.0 or later](COPYRIGHT).
+
+[Open Source attribution notices](docs/oss/attribution.md) are available.
+```
+
+Each new checked-in release document and its hosted download page must end
+with links whose visible text is `COPYRIGHT | LICENSE | ATTRIBUTION`. Use absolute
+URLs to those files at the release's immutable tag or corresponding immutable source
+revision so the links work in both locations. This release navigation is distinct
+from upstream component links, which must use the imported commit.
+
+Reuse the checked-in release document as the hosted release body where supported.
+The release procedure owns concrete URLs and publication mechanics for delivering
+the links through the selected channel. Do not maintain duplicate notice lists.
+These conventions do not by themselves require separate downloadable license
+assets, source bundles, or a different binary package format.
 
 ## Maintenance And Exceptions
 
-Update attribution in the change that adds, removes, upgrades, copies, or changes
-distribution of a relevant component. Inspect the selected source's actual
-licenses/notices rather than assuming they are unchanged. Update entries,
-commit links, and texts together; retain history through Git.
+Update project licensing statements together when the author changes the grant
+or its scope. Update upstream notices in the change that adds, removes, upgrades,
+copies, or changes the distribution of a relevant component. Check the selected source's license
+and notices rather than assuming they are unchanged. Update affected entries,
+commit links, and texts; retain historical versions through Git.
 
-Review affected statements, standard-text fidelity, and link destinations during
-ordinary change review. Future-release URLs can be checked against candidate
-paths before the tag exists remotely. Do not add publication-time network checks,
-CI polling, recurring legal sign-offs, mandatory scanners, or an SBOM just to
-implement this policy. Attribution maintenance is preparation, not a release gate.
+Check affected statements, faithful standard-text copies, and link destinations
+as part of ordinary change review. For a future release tag, check intended file
+paths against the candidate source; the tag need not resolve remotely before
+publication. Do not add publication-time network checks, CI polling, recurring
+legal sign-offs, mandatory scanners, or a full software bill of materials merely
+to implement this policy.
 
-Raise exceptions only for concrete obligations or unresolved rights questions
-the House Format does not address, including distribution-specific issues.
-Record their selected treatment here or in the affected entry and resolve them
-before the affected use/distribution, without reopening settled choices.
-Common ownership is not a blanket exception. Adapted standard policy documents
-retain their upstream documentation license and identify modifications in their
-provenance entry; this does not change Promptkit's library grant.
+Use the House Format routinely. Raise an exception only for a concrete obligation
+or unresolved rights question it does not address, including any arising from a
+particular distribution channel. Record the issue and selected treatment in the
+adopted OSS policy or an appropriate decision record. Attribution entries
+contain the resulting factual identification and required material, without
+repeating that reasoning. Resolve the issue before the affected use or
+distribution without reopening settled choices.
+Common ownership of projects is neither required nor a blanket exception.
 
-The maintainer-provided standard policy templates are internal and non-public.
-Their attribution entry identifies that source in prose and retains the
-applicable license locally; do not link to or require publication of the
-internal repository.
+Apply the formatting convention prospectively. Do not rewrite published tags,
+notes, binaries, or checksums to retrofit it. Address actual omissions deliberately
+under the applicable terms and the [release correction policy](release.md#immutability-and-failure-recovery).
+Ordinary attribution maintenance and release links are preparation work, not new
+release approval gates.
 
-Apply conventions prospectively. Do not rewrite published tags, notes, binaries,
-or checksums to retrofit formatting. Handle actual omissions deliberately under
-applicable terms and the [release correction policy](release.md#immutability-and-failure-recovery).
+## Promptkit Adoption
+
+Promptkit retains its LGPL-3.0-or-later library grant in
+[COPYRIGHT](../../COPYRIGHT). Adapted policy documentation has the separate
+scope identified there and in [attribution](../oss/attribution.md).
+
+Promptkit publishes source-only Go module tags on Gitea, with no binaries or
+separate hosted download page. The [release procedure](../release.md) owns
+publication and concrete footer URLs. The hosted-page guidance applies if such
+a channel is deliberately introduced; it does not require creating one.

docs/policy/release.md

@@ -1,30 +1,229 @@
 # Release Policy
 
-**Base Policy Version:** 1.2
+**Base Policy Version:** 1.4
 
-**Last Updated:** 2026-09-26
+**Last Updated**: 2026-09-27
 
-## Purpose And Adoption Scope
+**Upstream Source:** [release.md](https://gitea.maximumdirect.net/eric/policy/src/commit/d84a38ebab26f048cafbe59a2246700c35d29843/docs/policy/release.md)
 
-This policy owns Promptkit's release requirements and compatibility rules.
-The [release procedure](../release.md) owns the commands used to satisfy them.
-This scoped adoption applies to releases prepared after its adoption on
-2026-09-23. Published tags and historical notes are not rewritten to retrofit
-the new note format.
+## Purpose
 
-## Release Model And Compatibility
+This policy defines a proportionate workflow for validating and publishing an
+intended source revision under a fresh version. Releases should require little
+routine intervention, avoid repeated work, and preserve published contents.
 
-Promptkit publishes source-only Go module releases from committed, pushed
-`main` candidates through annotated `vMAJOR.MINOR.PATCH` tags. It publishes
-no binaries, hosted releases, or other artifacts and uses maintainer-run
-validation rather than hosted CI. Versions must be unused locally and on
-`origin`; the existing procedure accepts stable version tags only.
+The repository-specific commands belong in `docs/release.md`. Historical release
+summaries belong in `docs/releases/`. The procedure must agree with the adopted
+policy and link to it rather than introduce additional release requirements.
 
-Before v1, minor releases may change the public API and patches preserve
-compatibility within their minor line, subject to the catalog-data provision
-below. Release notes must identify compatibility impact, public API changes,
-and required consumer action. The source tag identifies the exact release;
-the checked-in note at that tag records its historical summary.
+## Release Model And Completion
+
+A source release identifies one exact committed source revision through an
+immutable version tag and a version-matched, checked-in release note. The
+primary release branch is `main` unless the adopted policy specifies otherwise.
+The procedure must name the authoritative publication remote.
+
+A successful push of the intended tag, with its source commit available on the
+authoritative primary branch, completes the release. The source commit may be
+pushed before the tag or published together with it through an atomic push.
+The procedure must choose and document the supported approach.
+
+Release commands must finish at successful publication. They must not wait for
+or poll CI, require successful CI status, inspect downloadable artifacts, or
+check consumer installation or Go module availability as completion gates.
+A failed or ambiguous push requires resolving the authoritative remote state
+before declaring success or retrying; successful pushes do not require a
+separate remote read-back gate.
+
+Repositories may publish source only. Additional binaries, images, packages,
+checksums, or other declared deliverables may be published asynchronously from
+the tagged source. The procedure must identify those deliverables and the
+responsibility of their automation. Published deliverables must be traceable
+to that source and identify the same version.
+
+Track source-release completion and artifact delivery separately. Report delivery
+failures and optional investigations under artifact-delivery status.
+
+## Versioning And Compatibility
+
+Stable releases use Semantic Versioning in the form `vMAJOR.MINOR.PATCH`, with
+no leading zeroes. Prereleases require an explicit adopted policy defining
+their format and use.
+
+The selected version must be unused locally and on the authoritative remote.
+Do not require queries to every configured remote or publication service.
+A version known to have already been published must not be reused, even if the
+normal guards do not inspect that channel. Adding a distribution channel
+requires a deliberate update to the policy and procedure where needed.
+
+For releases at or after `v1.0.0`:
+
+- a major release may make intentional incompatible changes;
+- a minor release may add backward-compatible behavior; and
+- a patch release may make backward-compatible fixes.
+
+Before `v1.0.0`, a minor release may change a documented public, operational,
+configuration, data, integration, or compatibility contract when the release
+note explains the impact and required consumer action. A patch release must
+not intentionally break those contracts within its minor line.
+
+Additional compatibility promises and deliberate exceptions belong in the
+adopted policy or canonical contract documentation. Release notes explain
+changes; they do not redefine current compatibility contracts.
+
+## Release Documentation
+
+Every new release must include `docs/releases/<version>.md` in the tagged
+source tree. Use the complete version tag as the filename and begin with a
+title containing the product name and that exact version.
+
+Include a short summary and any relevant compatibility impact or upgrade
+instructions. Use the Promptkit section structure below and keep the note
+proportionate to the change.
+
+Keep exact current contracts in their canonical documents and update affected
+documentation with the behavior change. Link to those documents from the note
+where useful. If annotated tags are used, derive their summary from the
+checked-in note.
+
+Include the release footer defined by the [OSS policy](oss.md#discoverability)
+in each new release document and preserve it on the hosted download page. The
+release procedure defines the concrete URLs and publication mechanics. Prepare
+these links with the release note; they do not add a network check or approval
+gate.
+
+Handle version selection, release-note content, and retirement of completed
+roadmaps during preparation. Preserve planned and deferred work and repair
+affected links when retiring roadmaps. Reuse ordinary change review for
+unintended files, credentials, and private data. Scope release-content review
+to the tagged source.
+
+## Candidate Validation
+
+Provide one publication command that validates the final committed candidate,
+checks publication state, and publishes the intended refs. A validation-only
+mode or command may be provided for diagnosis, but must not be a required step
+before publication repeats the same checks.
+
+Run the complete deterministic, offline default test suite once for the final
+candidate, following the [testing policy](testing.md). For repositories that
+publish builds, verify the required build targets. Select those targets for
+the application's actual support commitments; native testing on each platform
+and access to particular hardware are not default release prerequisites.
+
+Additional gates must address a concrete risk that the existing checks do not
+adequately cover. Do not automatically require linting, race testing, module
+hygiene audits, documentation audits, credential scans, example validation, or
+expanded platform matrices solely because they are possible. Retain such
+checks when their distinct protection justifies their cost. A one-time migration
+check must not silently become a permanent release requirement.
+
+Release tests must not require real credentials, mutable application services,
+paid APIs, provider probes, or inference calls. The procedure may describe dependency
+preparation separately from offline validation.
+
+Avoid duplicate validation across release phases. Successful checks for the
+same final candidate need not be repeated solely to satisfy another phase;
+any reuse must clearly apply to that exact candidate. Persistent validation
+caches are not required. If the candidate changes, validate the new candidate.
+Cheap publication-state checks may be repeated immediately before pushing
+because local or remote state may have changed during validation.
+
+Automate mechanical guards. Human review gates are strongly disfavored: add one
+only through an explicit project-specific policy decision explaining the
+concrete risk and why ordinary change review or automation is insufficient.
+Do not add routine confirmations for checks the command can perform itself.
+
+## Publication Guards
+
+Automate the checks needed to publish the intended source under a fresh version:
+
+- the version has the adopted format and is unused locally and on the
+  authoritative remote;
+- the worktree and index are clean on the primary release branch;
+- the source being published is the exact candidate that passed validation,
+  including its matching release note;
+- the remote primary branch already identifies that candidate, or an atomic
+  source/tag push will advance it to that candidate without discarding remote
+  history; and
+- the tag identifies the validated candidate and only the intended refs are
+  published.
+
+Fetch the authoritative branch and tag state as needed for these checks.
+Do not force branch or tag updates to bypass a failed guard. Publish explicit
+refs rather than all local tags. Do not require CI success, publication-service
+availability checks, or a separate manual confirmation for each guard.
+
+## Immutability And Failure Recovery
+
+Published version tags and published contents are immutable. Do not move,
+overwrite, recreate, or delete a published tag, or replace a published artifact,
+checksum, signature, provenance statement, or release note under that version.
+The checked-in note at the immutable tag is that release's historical record.
+
+If validation fails before publication, correct and commit the candidate and
+rerun the publication command. If a push fails or its outcome is ambiguous,
+inspect the authoritative remote before retrying. Remove an unpublished local
+tag only after confirming it was never published or used by a release channel.
+An unavailable remote leaves publication status unknown; do not overwrite a tag
+to resolve uncertainty.
+
+Transient network, authentication, CI, or consumer-availability failures do not
+by themselves require a new version. Asynchronous delivery may be retried from
+the same immutable tag. Missing artifacts may be published later, provided
+existing published contents are not replaced and the additions remain consistent
+with the tagged source and any already-published checksum manifest. If that
+cannot be achieved, publish a new version.
+
+A defect requiring changes to published source or contents requires a corrected
+commit, a new semantically appropriate version, a matching release note, and
+the release procedure again. Leave the original release intact. A channel's
+yank, deprecation, or advisory mechanism may warn consumers away from a defective
+release without replacing its contents or reusing its version.
+
+## Repository Release Procedure
+
+Maintain `docs/release.md` as a short, executable maintainer runbook. It must
+identify:
+
+1. prerequisites, primary branch, and authoritative remote;
+2. version and release-note preparation;
+3. one publication command with its selected local checks and automated guards;
+4. declared deliverables, required build targets, and automation responsibilities;
+5. the successful-push completion point and separately reported delivery status;
+   and
+6. failure handling, ambiguous-push recovery, and asynchronous delivery retries.
+
+Use copyable commands where practical. Keep optional diagnostics and consumer
+verification clearly optional. The procedure must not turn preparation work,
+ordinary change review, or post-publication investigation into additional
+release gates.
+
+## Promptkit Release Configuration
+
+The release-note requirements were adopted on 2026-09-23 and licensing
+navigation on 2026-09-26. Apply them prospectively; previously published notes
+and tags retain their original records.
+
+Promptkit publishes source-only Go modules from main to origin on Gitea, using
+annotated stable SemVer tags. It has no binaries, hosted download pages, or
+asynchronous deliverables. The source commit is pushed through main before the
+tag. The [release procedure](../release.md) owns commands and recovery.
+
+The existing publication script requires Summary, Compatibility, Upgrade, and
+Changes headings beneath a title of `# Promptkit vMAJOR.MINOR.PATCH`. State
+“No action required” or “None” where appropriate. This retained local structure
+matches the automated release-note guard; changing it is separate work.
+
+The [publication script](../../scripts/release.sh) runs the
+[local checks](../../scripts/release-check.sh) once for the final committed
+candidate: race-enabled tests, vet, three offline consumer examples, tracked
+Go formatting, Markdown links, module/workspace hygiene, whitespace, and a
+credential-pattern scan. These protect concurrency, assembled library use,
+source distribution, and documentation integrity. A separate ordinary test run
+or standalone build is not an additional release gate. Candidate, tag, and
+synchronized-main checks remain automated. No CI or module-availability wait
+is required. Licensing footer URLs are preparation work, not a network gate.
 
 ## Catalog Profile Compatibility
 
@@ -51,101 +250,3 @@ migrations.
 
 Catalog adoption and release validation remain local and offline. They do not
 probe provider endpoints, request model lists, or make inference calls.
-
-## Release Documentation
-
-Every new release must include `docs/releases/<version>.md` in the tagged
-source, using the complete tag as the filename. Its title contains Promptkit
-and that exact version. Use this structure:
-
-```markdown
-# Promptkit vMAJOR.MINOR.PATCH
-
-This release ...
-
-## Summary
-
-## Compatibility
-
-## Upgrade
-
-## Changes
-```
-
-State “No action required” or “None” where appropriate rather than omitting a
-section. Keep exact current contracts in their canonical documents and link
-to them. Update affected canonical documentation in the same candidate.
-
-These notes are historical records, not optional disposable guidance. Published
-release-note contents must not be replaced under the same version. Corrections
-belong in a subsequent release. Annotated-tag messages complement the checked-in
-note: generate the annotation from that note and the validated commit rather
-than maintaining a second summary.
-
-## Validation And Publication
-
-New release notes prepared after the 2026-09-26 OSS-policy adoption end with
-the [licensing footer](oss.md#discoverability). The release procedure owns
-absolute, release-pinned URLs. This is prospective preparation work, not a new
-approval or network-validation gate; historical notes and tags are not reformatted.
-
-The [publication script](../../scripts/release.sh) runs the
-[local checks](../../scripts/release-check.sh) once for the final candidate.
-Retain clean-candidate, synchronized-main, unused-version, module-hygiene,
-release-note structure, and tag-target checks. Publish only the selected tag
-ref. Changing the candidate requires fresh validation. No provider endpoint
-probes or inference calls are release checks.
-
-Release-note content and retirement of completed roadmaps are preparation
-responsibilities, not separate human sign-off gates. Preserve planned and
-deferred work and repair links. Ordinary change review covers unintended files,
-secrets, and private data; do not repeat it as a release-specific approval.
-
-A successful tag push to origin completes the release. Never wait for CI to
-finish or succeed. CI results, remote read-back, and Go module availability
-are informational follow-ups, not completion gates. An ambiguous push result
-requires confirming publication on origin, not waiting for CI.
-
-## Immutability And Failure Recovery
-
-Never move, replace, recreate, or delete a published tag or replace published
-release contents. If validation fails before publication, correct the candidate,
-rerun the complete checks, and repeat the publication guards. Remove an
-unpublished local tag only after confirming it was not published.
-
-If publication or subsequent investigation reveals a defect, leave the
-published release intact. Correct the defect on main, select a new patch or
-other semantically appropriate version, write its matching release note, and
-repeat the complete procedure. If publication status is uncertain, inspect
-the authoritative remote before deciding whether a tag is unpublished; do not
-overwrite it to retry.
-
-Transient network, authentication, CI, or module-availability failures do not
-by themselves warrant a new version. Investigate separately and publish a
-corrective release only when published contents actually need changing.
-
-## Policy Exceptions And Deliberate Scope
-
-This adoption follows the maintainer-approved lean workflow rather than every
-base-policy guard:
-
-- Collision checks concern origin, the authoritative publication destination,
-  rather than every configured remote. Local and origin tag checks, synchronized
-  main, and an explicit selected-ref push protect the actual release channel.
-- Automated local validation and publication-state checks replace manual
-  mechanical inspections and separate human sign-offs. Ordinary change review,
-  editorial responsibility for release notes, and roadmap housekeeping remain;
-  repeating them as approvals would add friction without distinct protection.
-- Successful tag publication completes this source-only release. CI can be slow
-  or unreliable, and module availability depends on external services. Neither
-  is a completion gate. Local candidate validation and explicit tag-target
-  checks protect publication; ambiguous push results are resolved against origin.
-  Actual defects are corrected in a new release, never by replacing a tag.
-
-Ignored local files are not prohibited merely because they exist: they are not
-included in the tagged commit. The clean-candidate guard and ordinary review of
-tracked changes protect the published contents.
-
-The catalog profile provision preserves an already approved compatibility
-boundary; it does not extend volatility to backend definitions or runtime
-contracts. Further release-governance changes require deliberate approval.

docs/policy/testing.md

@@ -1,43 +1,32 @@
 # Testing Policy
 
-**Base Policy Version:** 1.0
+**Base Policy Version:** 1.3
 
-**Last Updated:** 2026-09-23
+**Last Updated**: 2026-09-27
+
+**Upstream Source:** [testing.md](https://gitea.maximumdirect.net/eric/policy/src/commit/d84a38ebab26f048cafbe59a2246700c35d29843/docs/policy/testing.md)
 
 ## Purpose
 
 Our tests exist to make **incorrect changes expensive and correct changes cheap**.
 
-We do not optimize for test count, line coverage, exhaustive isolation, or the fewest possible tests. We optimize for sufficient confidence in important behavior while imposing as little unnecessary friction as possible on future development.
+We optimize for sufficient confidence in important behavior while minimizing friction on future development.
 
 ## Every test has a cost
 
-Testing is not an unqualified good. Every test imposes both an immediate cost and a continuing lifetime cost.
-
-A test must be:
-
-- written and reviewed;
-- understood by future maintainers and coding agents;
-- executed in maintainer-run validation;
-- diagnosed when it fails;
-- updated when legitimate behavior changes;
-- maintained as fixtures, APIs, and dependencies evolve; and
-- removed or rewritten when it becomes redundant, brittle, misleading, or obsolete.
-
-Tests also create cognitive and architectural friction. They can constrain refactoring, duplicate policy, slow feedback loops, add noise to failures, and cause harmless implementation changes to require unrelated edits across the suite.
+Every test has an immediate and continuing cost: writing, review, execution,
+diagnosis, fixture maintenance, and updates when legitimate behavior changes.
+Tests can also constrain refactoring, duplicate policy, and add failure noise.
 
 A test is warranted only when the confidence it provides justifies these costs.
-
-Apply this cost-benefit analysis at two levels:
+Evaluate that tradeoff at two levels:
 
 1. **Per test:** What realistic defect does this test detect, how consequential would that defect be, and is that protection worth the test's lifetime cost?
 2. **Across the suite:** Does this collection provide materially more confidence than a smaller, simpler suite would?
 
-The preferred test suite is a **lean suite that provides sufficient confidence in the risks that matter, without redundant or low-value tests**. We seek sufficient confidence with the least unnecessary testing friction, not the fewest possible tests.
+Some friction is intentional. Tests should make dangerous changes—such as breaking compatibility, corrupting data, violating security boundaries, or reintroducing subtle bugs—require deliberate review. Keep ordinary internal changes inexpensive.
 
-Some friction is intentional. Tests should make dangerous changes—such as breaking compatibility, corrupting data, violating security boundaries, or reintroducing subtle bugs—require deliberate review. They should not make ordinary internal changes needlessly expensive.
-
-The cost of a test is not a reason to omit testing by default. Do not cite maintenance cost abstractly. When omitting a plausible test, be able to state why the protected failure is low-risk, already covered, obvious, reversible, or cheaper to detect elsewhere. For consequential, subtle, or difficult-to-observe behavior, the presumption should favor testing.
+Evaluate maintenance cost against the specific failure being protected. When omitting a plausible test, be able to state why the protected failure is low-risk, already covered, obvious, reversible, or cheaper to detect elsewhere. For consequential, subtle, or difficult-to-observe behavior, the presumption should favor testing.
 
 ## Default testing style
 
@@ -51,6 +40,12 @@ Use a **classical/Detroit-style** approach:
 
 Examples of appropriate seams include clocks, randomness, subprocesses, remote APIs, object storage, email, and paid LLM calls.
 
+## Promptkit Test Boundaries
+
+Promptkit is a library without a CLI or hosted CI. The execution requirements,
+facade test ownership, public error guidance, and offline consumer examples
+below tailor the standard to that boundary.
+
 ## Test execution requirements
 
 Promptkit currently uses maintainer-run validation rather than hosted CI.
@@ -110,7 +105,7 @@ Use each test type where it protects a distinct risk:
 
 ## What deserves tests
 
-Prioritize tests for:
+To the extent the following features are present in the application, prioritize tests for:
 
 1. Public and package-level contracts.
 2. Domain rules and important invariants.
@@ -118,17 +113,29 @@ Prioritize tests for:
 4. Failure handling, cancellation, retries, recovery, and partial success.
 5. Serialization, schemas, compatibility, and round trips.
 6. Previously observed or plausible regressions.
-7. Representative integration and consumer workflows.
+7. Representative integration and end-to-end workflows.
 
-A package-level contract is behavior relied upon by another package or major collaborator, not every observable detail of a package implementation.
+A package-level contract comprises behavior relied upon by another package or major collaborator.
 
-For behavior involving **data integrity, destructive operations, compatibility, security, concurrency, idempotency, or recovery**, presume that durable tests are required unless the behavior is already credibly protected at another layer.
+Choose tests for requested behavior and established contracts. Tests must not
+introduce new restrictions, guarantees, or threat scenarios merely because they
+could be asserted. Follow the [agent policy](agents.md) when deciding whether a
+behavior belongs to the contract; current implementation behavior alone is not
+sufficient authority.
+
+For established behavior involving **data integrity, destructive operations,
+compatibility, security, concurrency, idempotency, or recovery**, favor durable
+tests for realistic failures whose consequences warrant protection. Identify
+the failure and the existing contract it would violate. These categories call
+for attention, not an automatic test inventory or permission to strengthen the
+application's guarantees. Account for protection already provided at other layers.
 
 Do not add tests merely because a function, branch, or line exists. Do not add a test when the same meaningful risk is already adequately protected elsewhere.
 
 ## Choose the right test boundary
 
-Test through the narrowest stable boundary that expresses the behavior clearly.
+Choose the narrowest stable boundary that expresses the behavior clearly and
+provides durable confidence with minimal incidental coupling.
 
 This is often the package API, but it may instead be:
 
@@ -136,30 +143,15 @@ This is often the package API, but it may instead be:
 - a package-level operation when several internal collaborators jointly produce the behavior; or
 - a larger integration boundary when correctness emerges from interaction with a real dependency.
 
-Do not force all behavior through oversized consumer-workflow tests. Do not
-test every private helper merely because it exists. Choose the boundary that
-gives durable confidence with the least incidental coupling.
-
 ## Test behavior, not implementation
 
-A test should protect a decision, contract, or invariant—not memorialize the current implementation.
+A test should protect a selected decision, contract, or invariant.
 
-Before adding or retaining a test, ask:
+A test is suspect when it primarily detects changes to private constants or
+helpers, equivalent operation ordering, incidental formatting, equivalent
+algorithms, or internal structure that preserves behavior.
 
-> What realistic defect would this test catch?
-
-A test is suspect when its main purpose is to detect that someone:
-
-- changed an internal constant;
-- renamed or split a private helper;
-- reordered equivalent internal operations;
-- changed incidental formatting;
-- replaced one correct algorithm with another; or
-- refactored internal object structure without changing behavior.
-
-Refactoring should normally require no test edits unless the refactored structure is itself part of the contract.
-
-A test can be factually correct and still have negative value. Accurately describing current behavior is not enough; the protected behavior must be important enough to justify the future friction.
+Behavioral tests should normally remain stable through internal refactoring that preserves the contract.
 
 ## Expected effects of different changes
 
@@ -176,13 +168,13 @@ A test failing is not the same as a test needing to be edited. Many tests may co
 
 ## Separate mechanism from policy
 
-Configurable thresholds and defaults must not be duplicated throughout the test suite.
+Derive expectations from test-controlled configuration and relationships.
 
-The following fragments are illustrative rather than standalone Go programs.
-Do not encode an internal concurrency limit indirectly:
+For this example, assume the selected contract rejects a request to start more
+processes than a configured limit. Do not encode its production default indirectly:
 
 ```go
-// Production policy:
+// Production default:
 const maxConcurrency = 4
 
 // Brittle test:
@@ -200,37 +192,40 @@ require.NoError(t, runner.Start(limit))
 require.ErrorIs(t, runner.Start(limit+1), ErrTooMuchConcurrency)
 ```
 
-The test should prove:
+For this selected contract, the test should prove:
 
 - the configured limit is accepted; and
 - one beyond the configured limit is rejected.
 
+Rejection is not a general requirement for concurrency control. If the selected
+contract queues excess work or limits active workers while accepting larger
+batches, test that behavior instead. Do not add rejection or a configurable
+limit solely to reproduce this example.
+
 The production default should be tested exactly only when its literal value is itself a public, operational, safety, protocol, or compatibility requirement.
 
-Apply the same rule to limits, timeouts, capacities, retry counts, and ranges: test relationships and behavior, not duplicated literals.
+Apply the same rule to limits, timeouts, capacities, retry counts, and ranges: test relationships and behavior.
 
-For concurrency limits, test both kinds of behavior when relevant:
+For established concurrency limits, distinguish these behaviors where the contract requires them:
 
-1. **Configuration enforcement:** invalid or excessive requested values are handled correctly.
+1. **Configuration handling:** values are accepted or rejected according to the selected contract.
 2. **Runtime enforcement:** observed peak concurrency never exceeds the configured limit.
 
-Use a test-controlled limit and measure the behavior relative to that limit. Do not merely assert today's default value.
+Use a test-controlled limit and measure the behavior relative to that limit.
 
-## Avoid semantic duplication across layers
+## Assign each behavior a test owner
 
-Each behavior should have a clear test owner.
+Where these layers exist, assign ownership as follows:
 
 - Parser tests own parsing cases.
 - Validator tests own validation rules.
 - Domain tests own transformations and invariants.
-- Boundary tests own external integration behavior.
+- Adapter tests own external integration behavior.
 - Orchestrator tests own coordination and failure propagation.
-- Consumer-workflow tests prove that representative assembled library use
-  works.
+- External-package root tests own the public Go facade contract.
+- Consumer-workflow tests prove that representative assembled library use works.
 
-Higher-level tests should not repeat every lower-level case. A single intentional policy change should not require unrelated edits across many test files.
-
-Tests that are individually reasonable may still be collectively redundant. Evaluate the marginal value of each additional test in light of the protection already provided by the rest of the suite.
+Give each layer its distinct responsibility and keep expectation updates localized to the contract being changed.
 
 ## Use test doubles deliberately
 
@@ -251,111 +246,78 @@ Mocks are appropriate when the contract includes facts such as:
 - an expensive API is called no more than once; or
 - a security audit event is emitted.
 
-Do not use mocks merely to isolate every object or reproduce the implementation's call graph.
-
 ## Go-specific guidance
 
-Use:
+Select techniques by behavior and risk:
 
 - table-driven tests for meaningful behavioral categories and boundaries;
 - `t.TempDir()` for real filesystem behavior;
 - `httptest.Server` for realistic HTTP interactions;
-- fuzz tests for parsers, normalization, path handling, and broad input spaces;
+- fuzz tests when exploring broad input spaces, such as parsers or path handling, adds useful protection beyond representative cases;
 - golden files only when the complete output is intentionally stable;
 - integration tests where correctness depends on component interaction; and
-- a small number of representative consumer-workflow tests.
+- a small number of representative end-to-end tests when assembled workflows expose meaningful risks not adequately covered at narrower boundaries.
 
-Avoid exact error-string assertions unless the wording is itself contractual. Prefer `errors.Is`, `errors.As`, typed errors, or structured error fields.
+Prefer `errors.Is`, `errors.As`, typed errors, or structured error fields. Use exact error-wording assertions only when the wording is contractual.
 
 At public API boundaries, prefer stable error identity, structured values, and
-the smallest semantic fragment needed to identify the failure. Do not snapshot
-complete diagnostic wording unless it is contractual.
+the smallest semantic fragment needed to identify the failure. Use complete
+diagnostic snapshots only when the wording is contractual.
 
-Golden-file updates must require an explicit local flag. Ordinary validation
-runs must never update golden files automatically, and maintainers must inspect
-the semantic diff before accepting an update.
+Golden-file updates must require an explicit local flag. Ordinary validation runs must never update golden files automatically, and reviewers must inspect the semantic diff before accepting an update.
 
-Keep tests readable and direct. Test helpers and fixture frameworks must earn their own maintenance cost; do not build elaborate test infrastructure for small or isolated needs.
+Keep tests readable and direct. Size test helpers and fixture frameworks to the maintenance benefit they provide.
 
 ## Coverage
 
-Coverage is a diagnostic, not a target.
+Use coverage to locate untested critical branches and unexpectedly weak packages. Evaluate test quality through meaningful behavioral protection and choose coverage according to risk.
 
-Use it to find untested critical branches and unexpectedly weak packages. Do not write low-value tests solely to increase a percentage, and do not infer test quality from coverage alone.
-
-Pure domain logic will often warrant higher coverage than facade wiring or
-external adapters. Uneven coverage is acceptable when it reflects risk.
-
-Increasing coverage is valuable only when the newly covered behavior protects a meaningful risk at an acceptable cost.
+Pure domain logic will often warrant higher coverage than facade wiring or external adapters. Uneven coverage is acceptable when it reflects risk.
 
 ## Regression tests
 
 A bug fix should normally include a regression test that fails before the fix and passes afterward.
 
-Retain the test when the defect could realistically recur and its consequences justify the ongoing cost. Prefer the narrowest durable test of the violated contract or invariant; do not preserve accidental implementation details from the original bug.
+Retain the test when the defect could realistically recur and its consequences justify the ongoing cost. Prefer the narrowest durable test of the violated contract or invariant.
 
-Not every historical bug requires a permanent test. If the underlying design has made recurrence impossible, the test has become redundant, or a stronger invariant test now subsumes it, remove or consolidate it.
+Remove or consolidate a test when the underlying design has made recurrence impossible, its protection is redundant, or a stronger invariant test subsumes it.
 
 ## Deleting or rewriting tests
 
-Tests are maintained code, not permanent historical artifacts.
-
-Delete or rewrite a test when its maintenance cost exceeds the confidence it provides.
+Delete or rewrite tests when maintenance cost exceeds their continuing
+protective value.
 
 Strong candidates include tests that:
 
 - require updates after harmless internal changes;
-- directly assert private constants without protecting a real contract;
-- duplicate the same policy across several layers;
+- assert incidental private constants or snapshot large amounts of incidental output;
 - verify mock choreography rather than outcomes;
-- snapshot large amounts of incidental output;
-- test trivial private helpers already exercised through stable package behavior;
-- protect risks already covered more effectively elsewhere;
+- duplicate policy across layers, retest trivial helpers covered by package
+  behavior, or protect risks covered more effectively elsewhere;
 - are flaky, misleading, obsolete, or disproportionately expensive to diagnose; or
 - no longer correspond to a plausible failure mode.
 
-Several brittle tests may encode one genuine requirement. Replace them with one durable behavior-level or invariant test rather than preserving all of them.
-
-Deleting a low-value test can improve the quality of the suite by reducing noise, maintenance burden, and friction around legitimate change.
+Several brittle tests may encode one genuine requirement. Consolidate them into one durable behavior-level or invariant test.
 
 ## Reviewing a proposed test
 
-Use the following questions when the value, boundary, or durability of a proposed test is not self-evident. Significant test additions should be reviewable against them, but written answers are not required for every routine test.
+Use the following questions when a proposed test needs closer evaluation. Significant test additions should be reviewable against them; written answers are optional for routine tests.
 
-1. What realistic defect would it catch?
-2. How likely is that defect?
-3. How consequential would it be?
-4. Is the behavior already protected elsewhere?
-5. At which layer should this behavior be owned?
-6. Does the test assert a durable contract or an incidental implementation detail?
-7. Could the implementation be refactored without changing the behavior and without editing this test?
-8. What should cause this test to fail?
-9. What legitimate changes should not cause this test to fail?
-10. What ongoing maintenance, execution, and diagnostic cost will the test impose?
-11. Is there a smaller or more direct test that protects the same risk?
-
-Do not add the test when its expected lifetime cost exceeds its expected protective value.
-
-When deciding not to test plausible behavior, record or be able to explain why the risk is low, already protected, obvious, reversible, or cheaper to detect elsewhere.
+1. Which requested behavior or established contract does it protect, and what realistic defect would violate it?
+2. How likely and consequential is that defect, and is it already protected elsewhere?
+3. What is the narrowest stable boundary that can test it clearly?
+4. Would a correct internal refactor or a change to an incidental default require test edits?
+5. Does its confidence justify its maintenance, execution, and diagnostic cost, or would a smaller test suffice?
 
 ## Definition of sufficient
 
 A test suite is sufficient when:
 
-- important contracts and invariants are protected;
-- meaningful boundaries and failure modes are exercised;
-- realistic and consequential regressions are credibly protected against silent recurrence;
-- behavior involving data integrity, destructive operations, compatibility, security, concurrency, idempotency, and recovery is credibly protected;
-- important external boundaries have realistic integration coverage;
-- representative complete workflows are tested;
-- failures provide useful signal rather than redundant noise;
-- legitimate internal changes usually do not require test edits; and
+- important requested behavior and established contracts are protected against realistic, consequential failures;
+- boundaries and component interactions have coverage where they introduce meaningful risks not protected elsewhere;
+- failures provide useful, distinct signals;
+- tests usually remain stable through legitimate internal changes; and
 - additional tests would mostly repeat existing protection or preserve inconsequential implementation details.
 
-Sufficiency is a risk judgment, not a coverage percentage or test count.
-Reassess it as the library, its consumers, and the consequences of failure
-evolve.
-
-The governing rule is:
-
-> Test heavily where failure is consequential, subtle, or difficult to detect after the fact. Test lightly where failure is obvious, reversible, and inexpensive—and retain no test whose lifetime cost exceeds the confidence it provides.
+Reassess sufficiency as the application, its users, and the consequences of
+failure evolve.

docs/releases/v0.11.2.md

@@ -0,0 +1,38 @@
+# Promptkit v0.11.2
+
+This patch aligns repository policies with the current standard and clarifies
+licensing and attribution for the copied policy documents.
+
+## Summary
+
+The update adds policy provenance, selective contributor reading guidance, and
+consistent upstream policy language while preserving Promptkit-specific rules.
+
+## Compatibility
+
+No public API, runtime behavior, dependency, or catalog changes are introduced.
+Promptkit remains LGPL-3.0-or-later. The [project grant](../../COPYRIGHT)
+identifies the separate CC-BY-SA-4.0 scope for copied or adapted policy material;
+the [attribution notices](../oss/attribution.md) identify the affected documents.
+The existing release checks and successful-tag-push completion point are unchanged.
+
+## Upgrade
+
+```sh
+go get gitea.maximumdirect.net/eric/promptkit@v0.11.2
+```
+
+No code or configuration migration is required from v0.11.1.
+
+## Changes
+
+- Align adopted policies with Standard Repository Policies while retaining
+  library-specific requirements and deliberate local decisions.
+- Add per-document upstream source links and the
+  [policy-set provenance document](../policy/meta.md).
+- Add selective policy reading to the [contributor guide](../development.md)
+  and update agent orientation.
+- Standardize factual attribution entries and identify copied-policy licensing.
+- Retire the completed policy-alignment roadmap.
+
+[COPYRIGHT](https://gitea.maximumdirect.net/eric/promptkit/src/tag/v0.11.2/COPYRIGHT) | [LICENSE](https://gitea.maximumdirect.net/eric/promptkit/src/tag/v0.11.2/LICENSE) | [ATTRIBUTION](https://gitea.maximumdirect.net/eric/promptkit/src/tag/v0.11.2/docs/oss/attribution.md)

docs/releases/v0.12.0.md

@@ -0,0 +1,74 @@
+# Promptkit v0.12.0
+
+This release replaces Promptkit's configuration loader with ConfigKit and
+migrates maintained catalogs to keyed `/v3` assets. It intentionally changes
+the public construction API and configuration format.
+
+## Summary
+
+Backends, profiles, and versioned prompts now share one layered configuration
+snapshot built when `NewEngine` is called. ConfigKit supplies composition,
+inheritance, presence, and source history; Promptkit validates the final
+effective definitions and captures prompt content and templates. Consumers can
+inspect the captured configuration explicitly without triggering a reload.
+
+## Compatibility
+
+This is an incompatible minor release under Promptkit's pre-1.0
+[versioning policy](../policy/release.md#versioning-and-compatibility). The
+former source options, `Config.PromptDir`, `Config.ProfileDir`, and the old
+profile/backend convenience values have been removed. Configuration documents
+now use literal keys beneath `backends`, `profiles`, and `prompts`; embedded
+`id`/`version` fields and `base_profile` are no longer accepted. Source groups
+compose strictly within a group and overlay in the supplied order. Explicit
+zero, false, empty, and null values can now differ from omission; maps overlay
+recursively, and an empty map does not clear an inherited map.
+
+All final definitions, including unused ones, are validated during engine
+construction. Prompt text and static templates are captured then; an existing
+engine does not automatically reload changed configuration or message files.
+Request artifacts, schemas, credentials, and provider operations retain their
+runtime boundaries. See the [format reference](../formats.md) for the current
+configuration contract and the [consumer migration guide](../consumers/pkg-promptkit.md#migrate-from-the-previous-configuration-api)
+for API and source-selection changes.
+
+Maintained OpenRouter and Rakestrawhome catalogs are selected as `/v3` modules,
+both at `v3.20260930.0`. Their asset format changed; consumers that read catalog
+assets directly must adopt the keyed format. The maintained Promptkit profile
+IDs remain available under the [catalog compatibility policy](../policy/release.md#catalog-profile-compatibility),
+which does not promise fixed profile data.
+
+## Upgrade
+
+```sh
+go get gitea.maximumdirect.net/eric/promptkit@v0.12.0
+```
+
+Replace removed source and backend registration options with
+`Config.Sources`, explicitly ordered ConfigKit underlays, and optionally a
+highest-priority main input. Use `DirectoryInputs` or `FilesystemInputs` for
+selected directories, `ProfileSource` and `BackendSource` for typed
+programmatic values, or `configkit.Mapping` for explicit null and combined
+documents. Move profile `base_profile` to `extends` and embedded identities to
+mapping keys. Review zero/false/null values and any assumptions that replacing
+a model or backend discards unrelated explicit settings. Rebuild the engine
+when definitions or referenced message files change. The
+[consumer guide](../consumers/pkg-promptkit.md#migrate-from-the-previous-configuration-api)
+provides the migration details and maintained examples.
+
+## Changes
+
+- Add ConfigKit v0.5.0 as the configuration boundary and consume released
+  OpenRouter and Rakestrawhome `/v3` catalog modules.
+- Add keyed backend, profile, and prompt definitions with final-value domain
+  validation, explicit presence/null behavior, and source-relative content
+  capture.
+- Add `ConfigurationSources`, directory discovery helpers, programmatic
+  profile/backend source builders, and read-only configuration inspection.
+- Preserve execution workflows while rendering captured templates, applying
+  backend defaults after inheritance, and honoring explicit suppression of
+  provider settings.
+- Remove superseded loader, catalog preflight, and inheritance machinery;
+  update examples, format guidance, and internal documentation.
+
+[COPYRIGHT](https://gitea.maximumdirect.net/eric/promptkit/src/tag/v0.12.0/COPYRIGHT) | [LICENSE](https://gitea.maximumdirect.net/eric/promptkit/src/tag/v0.12.0/LICENSE) | [ATTRIBUTION](https://gitea.maximumdirect.net/eric/promptkit/src/tag/v0.12.0/docs/oss/attribution.md)

docs/roadmap/deferred.md

@@ -42,20 +42,21 @@ checkpoint equality or when a broader semantic identity design is selected.
 ### Eager Source Validation
 
 **Reason for deferral:** Exact prompt and profile inspection may already
-provide a sufficiently small validation surface. Experience from downstream
-adoption should establish whether an engine-wide operation would add enough
-value to justify its broader contract.
+provide a sufficiently small validation surface alongside construction-time
+definition validation. Experience from downstream adoption should establish
+whether a separate operation would add enough value to justify its broader
+contract.
 
-Promptkit could provide an explicit offline operation that discovers and
-structurally validates configured prompt, profile, and schema sources without
-model generation. The normal `NewEngine` path would remain lazy.
+Promptkit could provide an explicit offline operation that also checks schema
+resources without model generation. `NewEngine` already validates effective
+definitions and captures prompt content; schema resources remain
+request-dependent.
 
-An eager operation would need coherent handling for duplicate prompt IDs and
-versions, strict YAML decoding, referenced content files, profile/backend
-membership, schema syntax and transitive references, context cancellation,
-and source-specific public errors. Credential declarations must remain
-separate from credential values; checking current environment availability,
-if supported at all, should be an explicit option and must not expose secrets.
+Such an operation would need coherent handling for schema syntax and transitive
+references, context cancellation, and source-specific public errors. Credential
+declarations must remain separate from credential values; checking current
+environment availability, if supported at all, should be an explicit option
+and must not expose secrets.
 
 Reconsider this idea after downstream use of `InspectPrompt`,
 `InspectProfile`, and fixture-based preparation demonstrates a concrete gap.

docs/roadmap/future.md

@@ -38,13 +38,8 @@ consumers.
 
 ## Ideas
 
-### Remaining Standard Policy Alignment
-
-Review the internal standard's architecture and testing clarifications about
-adopted constraints, threat scope, and tests that must not invent contracts.
-Adapt relevant guidance to Promptkit's library boundaries without introducing
-new runtime restrictions or release gates. This is separate from the completed
-licensing-documentation alignment.
+No ideas are currently awaiting selection. Active feature work belongs in its
+focused roadmap rather than this catalog.
 
 ## Entry Format
 

engine.go

@@ -8,6 +8,7 @@ import (
 	"net/http"
 	"time"
 
+	"gitea.maximumdirect.net/eric/ConfigKit"
 	"gitea.maximumdirect.net/eric/promptkit/internal/domain"
 	internalengine "gitea.maximumdirect.net/eric/promptkit/internal/engine"
 	"gitea.maximumdirect.net/eric/promptkit/internal/observation"
@@ -15,7 +16,7 @@ import (
 )
 
 // ErrInvalidConfig identifies invalid engine construction, including missing
-// required configuration, invalid options or backend registrations, and a nil
+// effective configuration, invalid options, and a nil
 // Engine receiver.
 var ErrInvalidConfig = errors.New("invalid engine configuration")
 
@@ -34,13 +35,13 @@ var (
 	// nor the selected prompt's default profile is present. Such an error also
 	// matches ErrInvalidRequest.
 	ErrProfileRequired = errors.New("profile selection is required")
-	// ErrPromptLoad identifies a failure to read, decode, validate, select, or
-	// hash a prompt definition, except for the not-found case represented by
-	// ErrPromptNotFound.
+	// ErrPromptLoad identifies a prompt selection failure other than the
+	// not-found case represented by ErrPromptNotFound. Invalid definitions
+	// instead fail construction with ErrInvalidConfig.
 	ErrPromptLoad = errors.New("failed to load prompt definition")
-	// ErrProfileLoad identifies a failure to read, decode, validate, or select
-	// an execution profile or resolve its backend, except for the profile
-	// not-found case represented by ErrProfileNotFound.
+	// ErrProfileLoad identifies a profile selection or resolution failure other
+	// than the not-found case represented by ErrProfileNotFound. Invalid
+	// definitions instead fail construction with ErrInvalidConfig.
 	ErrProfileLoad = errors.New("failed to load execution profile")
 	// ErrAPIKeyEnvMissing identifies an explicitly required APIKeyEnv whose
 	// environment variable is unset or empty after direct RunRequest.APIKey
@@ -84,7 +85,8 @@ var (
 // Engine inspects prompts and profiles and prepares and runs Promptkit prompt
 // requests.
 //
-// An Engine is safe for concurrent calls to [Engine.InspectPrompt],
+// An Engine is safe for concurrent calls to [Engine.InspectConfiguration],
+// [Engine.InspectPrompt],
 // [Engine.InspectProfile], [Engine.Prepare], [Engine.PrepareExecution],
 // [Engine.Run], and [Engine.RunPrepared]. Each Engine owns independent
 // backend-capacity pools that coordinate Run and RunPrepared admission and
@@ -94,18 +96,21 @@ type Engine struct {
 	internal *internalengine.Engine
 }
 
-// Config selects the directory-backed sources and built-in model-client
-// transport used by [NewEngine]. Config has no stable JSON representation.
+// ConfigurationSources selects ordered ConfigKit underlays and an optional
+// highest-priority main input. Each underlay's inputs strictly compose within
+// their group; later underlays overlay earlier ones. A nil Main uses
+// ConfigKit's empty source. A non-nil Main is passed through unchanged and
+// may fail construction if invalid.
+type ConfigurationSources struct {
+	Underlays []configkit.Underlay
+	Main      *configkit.Input
+}
+
+// Config selects configuration sources and built-in model-client transport
+// used by [NewEngine]. Config has no stable JSON representation.
 type Config struct {
-	// PromptDir is the directory searched recursively for prompt definitions.
-	// It is required unless a WithPromptFS or WithPromptFile option supplies the
-	// prompt source.
-	PromptDir string
-	// ProfileDir is an optional ordinary configured source whose profiles take
-	// precedence over application fallback and maintained catalog profiles. An
-	// empty value selects the lower-precedence sources unless a profile-source
-	// option supplies the ordinary source.
-	ProfileDir string
+	// Sources combines maintained definitions with caller-selected inputs.
+	Sources ConfigurationSources
 	// SchemaDir is the root for JSON Schema files. An empty value uses the
 	// current directory. WithSchemaFS or WithSchemaFile replaces this source.
 	SchemaDir string
@@ -128,12 +133,9 @@ type Config struct {
 // Option customizes engine construction.
 //
 // NewEngine applies options in argument order and ignores nil options. Within
-// each prompt-source, ordinary-profile-source, fallback-profile-source,
-// in-memory-profile, schema-source, model-client, and artifact-reader
-// category, the last non-nil valid option replaces earlier options in that
-// category. WithBackend is the additive exception: unique registrations
-// accumulate, and a repeated backend ID is an error rather than a replacement.
-// An invalid option fails construction even if a later option would replace it.
+// each schema-source, model-client, and artifact-reader category, the last
+// non-nil valid option replaces earlier options. An invalid option fails
+// construction even if a later option would replace it.
 type Option interface {
 	apply(*engineOptions) error
 }
@@ -181,102 +183,6 @@ func WithArtifactReader(reader ArtifactReader) Option {
 	})
 }
 
-// WithPromptFS loads prompt definitions from fsys under root.
-//
-// The source uses the same strict prompt YAML rules as configured prompt
-// directories, and prompt content_file paths resolve within this source.
-// fsys must be non-nil and root must be non-empty; otherwise NewEngine fails
-// with ErrInvalidConfig. This option replaces Config.PromptDir and earlier
-// prompt-source options.
-func WithPromptFS(fsys fs.FS, root string) Option {
-	return optionFunc(func(options *engineOptions) error {
-		return options.internal.SetPromptFS(fsys, root)
-	})
-}
-
-// WithPromptFile loads prompt definitions from the single prompt file at path.
-//
-// Relative prompt content_file paths resolve from the file's directory. path
-// must name an existing non-directory file when NewEngine applies the option.
-// This option replaces Config.PromptDir and earlier prompt-source options.
-func WithPromptFile(path string) Option {
-	return optionFunc(func(options *engineOptions) error {
-		return options.internal.SetPromptFile(path)
-	})
-}
-
-// WithProfileFS loads execution profiles from fsys under root.
-//
-// Profiles from this ordinary configured source take precedence over
-// application fallback and built-in profiles. Profile YAML must use api_key_env
-// for environment-based credentials; raw API keys are rejected. fsys must be
-// non-nil and root must be non-empty; otherwise NewEngine fails with
-// ErrInvalidConfig. This option replaces Config.ProfileDir and earlier file or
-// FS profile-source options, but remains below WithProfiles in precedence.
-func WithProfileFS(fsys fs.FS, root string) Option {
-	return optionFunc(func(options *engineOptions) error {
-		return options.internal.SetProfileFS(fsys, root)
-	})
-}
-
-// WithProfileFile loads execution profiles from the single profile file at path.
-//
-// The profile takes precedence over application fallback and built-in profiles.
-// Profile YAML must use api_key_env for environment-based credentials; raw API
-// keys are rejected. path must name an existing non-directory file when
-// NewEngine applies the option. This option replaces Config.ProfileDir and
-// earlier file or FS profile-source options, but remains below WithProfiles in
-// precedence.
-func WithProfileFile(path string) Option {
-	return optionFunc(func(options *engineOptions) error {
-		return options.internal.SetProfileFile(path)
-	})
-}
-
-// WithFallbackProfileFS supplies application-owned fallback profile
-// definitions from fsys under root.
-//
-// Profile lookup checks, in order, profiles supplied by WithProfiles; the
-// ordinary configured source selected by WithProfileFile, WithProfileFS, or
-// Config.ProfileDir; this fallback source; and Promptkit's maintained catalog
-// profiles. Each source supplies a complete profile definition; profile fields
-// are not merged between sources. Only an absent profile ID proceeds to the
-// next source. A matching read, parse, duplicate, validation, or credential
-// format failure stops resolution.
-//
-// Files use the ordinary strict profile YAML and api_key_env credential rules.
-// Loading and validation are lazy: NewEngine validates this option's arguments
-// but does not read profile files. fsys must be non-nil and root must be
-// nonblank; otherwise NewEngine returns an error matching ErrInvalidConfig.
-// Repeating this option replaces the earlier valid fallback source.
-//
-// This option controls profile-definition lookup, not provider or generation
-// failover.
-func WithFallbackProfileFS(fsys fs.FS, root string) Option {
-	return optionFunc(func(options *engineOptions) error {
-		return options.internal.SetFallbackProfileFS(fsys, root)
-	})
-}
-
-// WithProfiles configures in-memory profiles that take precedence over
-// ordinary configured, application fallback, and built-in profiles.
-//
-// NewEngine locally validates and copies every profile. IDs must be unique
-// within one call. An invalid local definition, duplicate ID, or unsupported
-// ExtraParams value makes construction fail with ErrInvalidConfig. A derived
-// profile's base reference and resolved target completeness are checked when it
-// is selected or inspected. Repeating WithProfiles replaces the complete
-// earlier in-memory set rather than merging it.
-func WithProfiles(profiles ...Profile) Option {
-	return optionFunc(func(options *engineOptions) error {
-		definitions := make([]domain.ExecutionProfile, len(profiles))
-		for index, publicProfile := range profiles {
-			definitions[index] = toDomainProfile(publicProfile)
-		}
-		return options.internal.SetMemoryProfiles(definitions)
-	})
-}
-
 // WithSchemaFS loads JSON Schema documents from fsys under root.
 //
 // Prompt schema_path values resolve within this source when schema validation
@@ -302,14 +208,15 @@ func WithSchemaFile(path string) Option {
 
 // NewEngine constructs an Engine from configuration and options.
 //
-// Options are applied in order according to [Option]. PromptDir is required
-// unless a prompt-source option is present. Construction validates option
-// arguments, in-memory profiles, and backend registrations but defers reading
-// and validating prompt, file-backed profile, and schema contents until Prepare
-// or Run needs them.
+// ConfigKit composes maintained catalog inputs, PromptKit-owned definitions,
+// caller underlays, and the optional main input in that order. Construction
+// validates the final effective backend, profile, and prompt definitions and
+// captures referenced prompt content. A missing prompt collection is allowed.
+// Schema documents and request artifacts remain runtime resources.
 //
 // NewEngine returns an error matching ErrInvalidConfig for invalid
-// configuration, options, or backend-capacity policies. Each constructed
+// configuration or options, preserving a ConfigKit LoadError when loading
+// fails. Each constructed
 // Engine has independent backend-capacity pools. Construction does not perform
 // model requests or require credentials. A negative Config.TransientRetries
 // is invalid.
@@ -320,16 +227,16 @@ func NewEngine(cfg Config, opts ...Option) (*Engine, error) {
 			continue
 		}
 		if err := opt.apply(&options); err != nil {
-			return nil, fmt.Errorf("%w: %v", ErrInvalidConfig, err)
+			return nil, fmt.Errorf("%w: %w", ErrInvalidConfig, err)
 		}
 	}
 
 	assembled, err := internalengine.New(
-		internalengine.Config{PromptDir: cfg.PromptDir, ProfileDir: cfg.ProfileDir, SchemaDir: cfg.SchemaDir, Timeout: cfg.Timeout, HTTPClient: cfg.HTTPClient, TransientRetries: copyIntPtr(cfg.TransientRetries)},
+		internalengine.Config{Sources: internalengine.ConfigurationSources{Underlays: cfg.Sources.Underlays, Main: cfg.Sources.Main}, SchemaDir: cfg.SchemaDir, Timeout: cfg.Timeout, HTTPClient: cfg.HTTPClient, TransientRetries: copyIntPtr(cfg.TransientRetries)},
 		options.internal,
 	)
 	if err != nil {
-		return nil, fmt.Errorf("%w: %v", ErrInvalidConfig, err)
+		return nil, fmt.Errorf("%w: %w", ErrInvalidConfig, err)
 	}
 	return &Engine{internal: assembled}, nil
 }
@@ -339,9 +246,9 @@ func NewEngine(cfg Config, opts ...Option) (*Engine, error) {
 //
 // InspectPrompt requires a nonblank promptID. It passes nonblank promptID and
 // promptVersion values unchanged to the engine's ordinary, case-sensitive
-// prompt selection. An empty version succeeds only when that source has one
-// selected ID; a nonempty version selects one exact ID/version pair. The
-// configured prompt source is used without merging, fallback, or enumeration.
+// prompt selection. An empty version succeeds only when that ID has one
+// version; a nonempty version selects one exact ID/version pair from the
+// captured configuration snapshot.
 //
 // A successful result proves that the selected definition and any referenced
 // message content files were structurally loaded. Inputs are returned in
@@ -349,22 +256,22 @@ func NewEngine(cfg Config, opts ...Option) (*Engine, error) {
 // resolved. OutputContract is the normalized declared contract, with a JSON
 // Schema path when declared but without loading or compiling that schema.
 // PromptHash is the same opaque equality value as PreparedRun.PromptHash for
-// the selected definition and observed source state; its spelling, length,
+// the selected captured definition; its spelling, length,
 // encoding, algorithm, and security properties are not contracts.
 //
 // This method does not return prompt bodies, templates, source paths, schemas,
 // rendered messages, or execution settings. It does not resolve a profile or
 // credential, read artifacts or schemas, render, validate, admit capacity,
 // contact a provider, or generate model output. The returned PromptInspection
-// and its input slice are caller-owned. Filesystem-backed inspection is a
-// point-in-time lookup and does not freeze a definition for later execution.
+// and its input slice are caller-owned. Inspection does not reload configuration
+// or content files; construct another Engine to observe source changes.
 //
 // A nil Engine returns an error matching ErrInvalidConfig. A blank prompt ID
 // matches ErrInvalidRequest. An absent exact ID or version matches
-// ErrPromptNotFound and not ErrPromptLoad. Malformed, unreadable, duplicate,
-// ambiguous, referenced-content, or hashing failures match ErrPromptLoad.
-// Cancellation during lookup matches ErrPromptLoad while preserving the
-// context error. InspectPrompt returns no partial result on error.
+// ErrPromptNotFound and not ErrPromptLoad. An ambiguous omitted version matches
+// ErrPromptLoad. Invalid definitions and resource failures reject construction
+// instead. Cancellation during lookup preserves the context error. InspectPrompt
+// returns no partial result on error.
 func (e *Engine) InspectPrompt(
 	ctx context.Context,
 	promptID string,
@@ -384,10 +291,9 @@ func (e *Engine) InspectPrompt(
 // InspectProfile resolves one explicit profile without selecting a prompt or
 // starting execution work.
 //
-// InspectProfile trims surrounding whitespace from profileID and looks up the
-// resulting nonblank ID exactly and case-sensitively through the engine's
-// in-memory, ordinary configured-source, application fallback, and built-in
-// profile precedence. It applies the framework timeout baseline, selected
+// InspectProfile looks up a nonblank profileID exactly and case-sensitively
+// in the captured effective configuration. It applies the framework timeout
+// baseline, selected
 // backend, and then selected profile to EffectiveModelParams without a request
 // override. BackendID is empty for an endpoint-only profile.
 //
@@ -398,16 +304,15 @@ func (e *Engine) InspectPrompt(
 // absent or blank named environment variable is not an error.
 //
 // The returned ProfileInspection and all nested mutable values are
-// caller-owned. Filesystem-backed inspection is a point-in-time lookup and
-// does not freeze the profile for a later execution. This method does not load
+// caller-owned. Inspection does not reload configuration; construct another
+// Engine to observe source changes. This method does not load
 // a prompt, render, read artifacts or schemas, admit backend capacity, contact
 // a provider, or generate model output.
 //
 // A nil Engine returns an error matching ErrInvalidConfig. A blank profile ID
 // matches ErrInvalidRequest. An absent exact ID matches ErrProfileNotFound and
-// not ErrProfileLoad. Malformed or unreadable profile data, an unknown backend,
-// or an invalid resolved target matches ErrProfileLoad. Cancellation during
-// profile loading matches ErrProfileLoad while preserving the context error.
+// not ErrProfileLoad. Invalid definitions or unknown backends reject
+// construction instead. Cancellation preserves the context error.
 // InspectProfile returns no partial result on error.
 func (e *Engine) InspectProfile(ctx context.Context, profileID string) (*ProfileInspection, error) {
 	if e == nil || e.internal == nil {
@@ -495,8 +400,9 @@ func (e *Engine) PrepareExecution(ctx context.Context, req RunRequest) (*Prepare
 }
 
 // Run prepares a request, invokes the configured LLMClient, and validates the
-// generated output. Each call resolves current sources and composes a fresh,
-// stateless effective prompt with any validated RunRequest.AppendedMessages.
+// generated output. Each call uses the Engine's captured configuration and
+// composes a fresh effective prompt with any validated
+// RunRequest.AppendedMessages.
 //
 // A content-validation failure is a successful run whose
 // RunResult.Validation has Status ValidationFailed. When its output contract

errors.go

@@ -72,10 +72,6 @@ func publicErrorFor(err error) error {
 		return ErrPromptLoad
 	case errors.Is(err, usecase.ErrProfileLoad):
 		return ErrProfileLoad
-	case errors.Is(err, promptdef.ErrInvalidYAML), errors.Is(err, promptdef.ErrInvalidPromptDefinition):
-		return ErrPromptLoad
-	case isProfileLoadCause(err):
-		return ErrProfileLoad
 	case errors.Is(err, usecase.ErrAPIKeyEnvMissing):
 		return errors.Join(ErrInvalidRequest, ErrAPIKeyEnvMissing)
 	case errors.Is(err, capacity.ErrCapacityExceeded):
@@ -94,9 +90,3 @@ func publicErrorFor(err error) error {
 		return nil
 	}
 }
-
-func isProfileLoadCause(err error) bool {
-	return errors.Is(err, profile.ErrInvalidYAML) ||
-		errors.Is(err, profile.ErrInvalidProfile) ||
-		errors.Is(err, profile.ErrRawAPIKeyNotAllowed)
-}

examples/go-library/observe/main.go

@@ -10,6 +10,7 @@ import (
 	"os"
 	"strings"
 
+	"gitea.maximumdirect.net/eric/ConfigKit"
 	"gitea.maximumdirect.net/eric/promptkit"
 )
 
@@ -78,14 +79,24 @@ type summary struct {
 
 func run() (summary, error) {
 	transport := &scriptedTransport{}
-	engine, err := promptkit.NewEngine(promptkit.Config{HTTPClient: &http.Client{Transport: transport}},
-		promptkit.WithPromptFS(assets, "prompts"),
-		promptkit.WithSchemaFS(assets, "schemas"),
-		promptkit.WithBackend(promptkit.Backend{ID: "offline-backend", Endpoint: "https://example.invalid/v1", ConcurrencyLimit: 1}),
-		promptkit.WithProfiles(
-			promptkit.Profile{ID: "proposal-profile", BackendID: "offline-backend", Model: "proposal-model"},
-			promptkit.Profile{ID: "assessment-profile", BackendID: "offline-backend", Model: "assessment-model"},
-		))
+	inputs, err := promptkit.FilesystemInputs("example prompts", assets, "prompts")
+	if err != nil {
+		return summary{}, err
+	}
+	backendID, proposalModel, assessmentModel := "offline-backend", "proposal-model", "assessment-model"
+	inputs = append(inputs,
+		configkit.Input{Source: promptkit.BackendSource("example backend", map[string]promptkit.BackendConfig{
+			backendID: promptkit.LocalBackend("https://example.invalid/v1", 1),
+		})},
+		configkit.Input{Source: promptkit.ProfileSource("example profiles", map[string]promptkit.ProfileConfig{
+			"proposal-profile":   {Backend: &backendID, Model: &proposalModel},
+			"assessment-profile": {Backend: &backendID, Model: &assessmentModel},
+		})},
+	)
+	engine, err := promptkit.NewEngine(promptkit.Config{
+		Sources:    promptkit.ConfigurationSources{Underlays: []configkit.Underlay{{Inputs: inputs}}},
+		HTTPClient: &http.Client{Transport: transport},
+	}, promptkit.WithSchemaFS(assets, "schemas"))
 	if err != nil {
 		return summary{}, err
 	}

examples/go-library/observe/prompts/assessment.yaml

@@ -1,17 +1,18 @@
-id: example.assessment
-version: "1.0.0"
-default_profile: assessment-profile
-description: Assess a structured proposal independently of schema validity.
-inputs:
-  - name: proposal
-    required: true
-    content_type: application/json
-messages:
-  - role: system
-    content: Return a concise assessment as JSON.
-  - role: user
-    content: '{{input "proposal"}}'
-output:
-  format: json
-  validation_mode: json_schema
-  schema_path: assessment.schema.json
+prompts:
+  example.assessment:
+    "1.0.0":
+      default_profile: assessment-profile
+      description: Assess a structured proposal independently of schema validity.
+      inputs:
+        - name: proposal
+          required: true
+          content_type: application/json
+      messages:
+        - role: system
+          content: Return a concise assessment as JSON.
+        - role: user
+          content: '{{input "proposal"}}'
+      output:
+        format: json
+        validation_mode: json_schema
+        schema_path: assessment.schema.json

examples/go-library/observe/prompts/proposal.yaml

@@ -1,17 +1,18 @@
-id: example.proposal
-version: "1.0.0"
-default_profile: proposal-profile
-description: Propose a bounded improvement from a synthetic idea.
-inputs:
-  - name: idea
-    required: true
-    content_type: text/plain
-messages:
-  - role: system
-    content: Return a concise proposal as JSON.
-  - role: user
-    content: '{{input "idea"}}'
-output:
-  format: json
-  validation_mode: json_schema
-  schema_path: proposal.schema.json
+prompts:
+  example.proposal:
+    "1.0.0":
+      default_profile: proposal-profile
+      description: Propose a bounded improvement from a synthetic idea.
+      inputs:
+        - name: idea
+          required: true
+          content_type: text/plain
+      messages:
+        - role: system
+          content: Return a concise proposal as JSON.
+        - role: user
+          content: '{{input "idea"}}'
+      output:
+        format: json
+        validation_mode: json_schema
+        schema_path: proposal.schema.json

examples/go-library/prepare/main.go

@@ -6,6 +6,7 @@ import (
 	"fmt"
 	"os"
 
+	"gitea.maximumdirect.net/eric/ConfigKit"
 	"gitea.maximumdirect.net/eric/promptkit"
 )
 
@@ -18,18 +19,23 @@ type summary struct {
 }
 
 func main() {
-	engine, err := promptkit.NewEngine(
-		promptkit.Config{},
-		promptkit.WithPromptFile("examples/go-library/prepare/prompt.yaml"),
-		promptkit.WithProfiles(promptkit.Profile{
-			ID:       "offline-example",
-			Endpoint: "https://example.invalid/v1",
-			Model:    "offline-model",
-		}),
-	)
+	endpoint, model := "https://example.invalid/v1", "offline-model"
+	engine, err := promptkit.NewEngine(promptkit.Config{Sources: promptkit.ConfigurationSources{
+		Underlays: []configkit.Underlay{{Inputs: []configkit.Input{{Source: promptkit.ProfileSource("example profile", map[string]promptkit.ProfileConfig{
+			"offline-example": {Endpoint: &endpoint, Model: &model},
+		})}}}},
+		Main: &configkit.Input{Source: configkit.File("examples/go-library/prepare/prompt.yaml")},
+	}})
 	if err != nil {
 		exit(err)
 	}
+	view, err := engine.InspectConfiguration()
+	if err != nil {
+		exit(err)
+	}
+	if _, found := view.Explain(configkit.Keys("profiles", "offline-example", "model")); !found {
+		exit(fmt.Errorf("configured profile model was not found"))
+	}
 
 	prepared, err := engine.Prepare(context.Background(), promptkit.RunRequest{
 		PromptID: "example.prepare",

examples/go-library/prepare/prompt.yaml

@@ -1,16 +1,17 @@
-id: example.prepare
-version: "1.0.0"
-default_profile: offline-example
-description: Prepare a prompt without contacting a model provider.
-inputs:
-  - name: note
-    required: true
-    content_type: text/plain
-messages:
-  - role: system
-    content: Summarize the note in one sentence.
-  - role: user
-    content: '{{input "note"}}'
-output:
-  format: text
-  validation_mode: basic
+prompts:
+  example.prepare:
+    "1.0.0":
+      default_profile: offline-example
+      description: Prepare a prompt without contacting a model provider.
+      inputs:
+        - name: note
+          required: true
+          content_type: text/plain
+      messages:
+        - role: system
+          content: Summarize the note in one sentence.
+        - role: user
+          content: '{{input "note"}}'
+      output:
+        format: text
+        validation_mode: basic

examples/go-library/run/main.go

@@ -6,6 +6,7 @@ import (
 	"fmt"
 	"os"
 
+	"gitea.maximumdirect.net/eric/ConfigKit"
 	"gitea.maximumdirect.net/eric/promptkit"
 )
 
@@ -38,16 +39,13 @@ type summary struct {
 }
 
 func main() {
-	engine, err := promptkit.NewEngine(
-		promptkit.Config{},
-		promptkit.WithPromptFile("examples/go-library/run/prompt.yaml"),
-		promptkit.WithProfiles(promptkit.Profile{
-			ID:       "offline-example",
-			Endpoint: "https://example.invalid/v1",
-			Model:    "offline-model",
-		}),
-		promptkit.WithLLMClient(deterministicClient{}),
-	)
+	endpoint, model := "https://example.invalid/v1", "offline-model"
+	engine, err := promptkit.NewEngine(promptkit.Config{Sources: promptkit.ConfigurationSources{
+		Underlays: []configkit.Underlay{{Inputs: []configkit.Input{{Source: promptkit.ProfileSource("example profile", map[string]promptkit.ProfileConfig{
+			"offline-example": {Endpoint: &endpoint, Model: &model},
+		})}}}},
+		Main: &configkit.Input{Source: configkit.File("examples/go-library/run/prompt.yaml")},
+	}}, promptkit.WithLLMClient(deterministicClient{}))
 	if err != nil {
 		exit(err)
 	}

examples/go-library/run/prompt.yaml

@@ -1,16 +1,17 @@
-id: example.run
-version: "1.0.0"
-default_profile: offline-example
-description: Run a prompt with a deterministic injected model client.
-inputs:
-  - name: note
-    required: true
-    content_type: text/plain
-messages:
-  - role: system
-    content: Summarize the note in one sentence.
-  - role: user
-    content: '{{input "note"}}'
-output:
-  format: text
-  validation_mode: basic
+prompts:
+  example.run:
+    "1.0.0":
+      default_profile: offline-example
+      description: Run a prompt with a deterministic injected model client.
+      inputs:
+        - name: note
+          required: true
+          content_type: text/plain
+      messages:
+        - role: system
+          content: Summarize the note in one sentence.
+        - role: user
+          content: '{{input "note"}}'
+      output:
+        format: text
+        validation_mode: basic

frozen_rendering_contract_test.go

@@ -0,0 +1,177 @@
+package promptkit_test
+
+import (
+	"context"
+	"errors"
+	"fmt"
+	"io/fs"
+	"os"
+	"path/filepath"
+	"sync"
+	"sync/atomic"
+	"testing"
+	"testing/fstest"
+
+	"gitea.maximumdirect.net/eric/ConfigKit"
+	"gitea.maximumdirect.net/eric/promptkit"
+)
+
+const capturedPromptDocument = `
+prompts:
+  captured:
+    "1":
+      default_profile: offline
+      session_id: '{{.session}}'
+      messages:
+        - role: user
+          content_file: body.tmpl
+      output:
+        format: text
+        validation_mode: none
+`
+
+func capturedPromptEngine(t *testing.T, source fs.FS) *promptkit.Engine {
+	t.Helper()
+	inputs, err := promptkit.FilesystemInputs("application prompts", source, "config")
+	if err != nil {
+		t.Fatalf("select prompt inputs: %v", err)
+	}
+	endpoint, model := "https://example.invalid/v1", "offline-model"
+	engine, err := promptkit.NewEngine(promptkit.Config{Sources: promptkit.ConfigurationSources{
+		Underlays: []configkit.Underlay{
+			{Inputs: inputs},
+			{Inputs: []configkit.Input{{Source: promptkit.ProfileSource("offline profile", map[string]promptkit.ProfileConfig{
+				"offline": {Endpoint: &endpoint, Model: &model},
+			})}}},
+		},
+	}})
+	if err != nil {
+		t.Fatalf("construct engine: %v", err)
+	}
+	return engine
+}
+
+func TestEngineCapturesPromptContentUntilReconstruction(t *testing.T) {
+	files := fstest.MapFS{
+		"config/prompt.yaml": &fstest.MapFile{Data: []byte(capturedPromptDocument)},
+		"config/body.tmpl":   &fstest.MapFile{Data: []byte("before {{.name}}")},
+	}
+	first := capturedPromptEngine(t, files)
+	files["config/body.tmpl"] = &fstest.MapFile{Data: []byte("after {{.name}}")}
+	request := promptkit.RunRequest{PromptID: "captured", Vars: map[string]string{"name": "Ada", "session": "session-1"}}
+	oldPrepared, err := first.Prepare(context.Background(), request)
+	if err != nil {
+		t.Fatalf("prepare with existing engine: %v", err)
+	}
+	second := capturedPromptEngine(t, files)
+	newPrepared, err := second.Prepare(context.Background(), request)
+	if err != nil {
+		t.Fatalf("prepare with rebuilt engine: %v", err)
+	}
+	if oldPrepared.Messages[0].Content != "before Ada" || newPrepared.Messages[0].Content != "after Ada" || oldPrepared.PromptHash == newPrepared.PromptHash {
+		t.Fatalf("captured content or hash did not follow engine lifetime: old=%+v new=%+v", oldPrepared, newPrepared)
+	}
+}
+
+type unreadableAfterConstructionFS struct {
+	fs.FS
+	closed atomic.Bool
+	reads  atomic.Int64
+}
+
+func (source *unreadableAfterConstructionFS) Open(name string) (fs.File, error) {
+	if source.closed.Load() {
+		source.reads.Add(1)
+		return nil, fs.ErrPermission
+	}
+	return source.FS.Open(name)
+}
+
+func TestCapturedTemplatesBindInputsIndependentlyAcrossConcurrentPreparations(t *testing.T) {
+	source := &unreadableAfterConstructionFS{FS: fstest.MapFS{
+		"config/prompt.yaml": &fstest.MapFile{Data: []byte(capturedPromptDocument)},
+		"config/body.tmpl":   &fstest.MapFile{Data: []byte(`{{.name}}: {{input "note"}}`)},
+	}}
+	engine := capturedPromptEngine(t, source)
+	source.closed.Store(true)
+
+	const calls = 24
+	var wait sync.WaitGroup
+	errs := make(chan error, calls)
+	for index := 0; index < calls; index++ {
+		wait.Add(1)
+		go func(index int) {
+			defer wait.Done()
+			name := fmt.Sprintf("caller-%d", index)
+			body := fmt.Sprintf("body-%d", index)
+			prepared, err := engine.Prepare(context.Background(), promptkit.RunRequest{
+				PromptID: "captured", SessionID: "direct-session",
+				Vars:   map[string]string{"name": name},
+				Inputs: map[string]promptkit.ArtifactRef{"note": promptkit.Inline(body)},
+			})
+			if err == nil && (prepared.Messages[0].Content != name+": "+body || prepared.SessionID != "direct-session") {
+				err = fmt.Errorf("unexpected prepared content: %+v", prepared)
+			}
+			errs <- err
+		}(index)
+	}
+	wait.Wait()
+	close(errs)
+	for err := range errs {
+		if err != nil {
+			t.Fatal(err)
+		}
+	}
+	if source.reads.Load() != 0 {
+		t.Fatalf("preparation reopened captured source %d times", source.reads.Load())
+	}
+
+	_, err := engine.Prepare(context.Background(), promptkit.RunRequest{
+		PromptID: "captured", Vars: map[string]string{"name": "Ada"},
+		Inputs: map[string]promptkit.ArtifactRef{"note": promptkit.Inline("body")},
+	})
+	if !errors.Is(err, promptkit.ErrPromptRender) {
+		t.Fatalf("missing session variable = %v, want runtime render error", err)
+	}
+	_, err = engine.Prepare(context.Background(), promptkit.RunRequest{
+		PromptID: "captured", SessionID: "direct-session", Vars: map[string]string{"name": "Ada"},
+	})
+	if !errors.Is(err, promptkit.ErrPromptRender) {
+		t.Fatalf("missing input helper artifact = %v, want runtime render error", err)
+	}
+}
+
+func TestPreparationStillReadsRequestArtifactsAndSchemasAfterConstruction(t *testing.T) {
+	endpoint, model := "https://example.invalid/v1", "offline-model"
+	schemas := fstest.MapFS{}
+	engine, err := promptkit.NewEngine(promptkit.Config{Sources: promptkit.ConfigurationSources{
+		Underlays: []configkit.Underlay{{Inputs: []configkit.Input{{Source: promptkit.ProfileSource("profile", map[string]promptkit.ProfileConfig{
+			"offline": {Endpoint: &endpoint, Model: &model},
+		})}}}},
+		Main: &configkit.Input{Source: configkit.Mapping("structured prompt", map[string]any{
+			"prompts": map[string]any{"structured": map[string]any{"1": map[string]any{
+				"default_profile": "offline",
+				"inputs":          []any{map[string]any{"name": "note", "required": true}},
+				"messages":        []any{map[string]any{"role": "user", "content": `{{input "note"}}`}},
+				"output":          map[string]any{"format": "json", "validation_mode": "json_schema", "schema_path": "schema.json"},
+			}}},
+		})},
+	}}, promptkit.WithSchemaFS(schemas, "."))
+	if err != nil {
+		t.Fatalf("construct engine before request resources exist: %v", err)
+	}
+	schemas["schema.json"] = &fstest.MapFile{Data: []byte(`{"$schema":"https://json-schema.org/draft/2020-12/schema","type":"object"}`)}
+	artifactPath := filepath.Join(t.TempDir(), "note.txt")
+	if err := os.WriteFile(artifactPath, []byte("request artifact"), 0o600); err != nil {
+		t.Fatalf("write request artifact: %v", err)
+	}
+	prepared, err := engine.Prepare(context.Background(), promptkit.RunRequest{PromptID: "structured", Inputs: map[string]promptkit.ArtifactRef{
+		"note": promptkit.File(artifactPath),
+	}})
+	if err != nil {
+		t.Fatalf("prepare with resources supplied after construction: %v", err)
+	}
+	if len(prepared.Messages) != 1 || prepared.Messages[0].Content != "request artifact" || prepared.StructuredOutput == nil || prepared.StructuredOutput.JSONSchema == nil {
+		t.Fatalf("runtime artifact or schema was not prepared: %+v", prepared)
+	}
+}

generation_error_contract_test.go

@@ -21,14 +21,14 @@ func TestBuiltInGenerationError(t *testing.T) {
 	engine := newBuiltInGenerationErrorEngine(t, http.StatusUnprocessableEntity,
 		`{"error":{"code":"`+codeMarker+`","type":"`+typeMarker+`","message":"`+messageMarker+`"}}`)
 
-	result, err := engine.Run(context.Background(), generationErrorRunRequest())
+	result, err := engine.Run(context.Background(), simpleGenerationRequest())
 	if result != nil {
 		t.Fatalf("Run result = %#v, want nil", result)
 	}
 	assertGenerationError(t, err, http.StatusUnprocessableEntity, codeMarker, typeMarker, messageMarker)
 
 	preparedEngine := newBuiltInGenerationErrorEngine(t, http.StatusServiceUnavailable, `{"error":{}}`)
-	prepared, err := preparedEngine.PrepareExecution(context.Background(), generationErrorRunRequest())
+	prepared, err := preparedEngine.PrepareExecution(context.Background(), simpleGenerationRequest())
 	if err != nil {
 		t.Fatalf("PrepareExecution: %v", err)
 	}
@@ -43,7 +43,7 @@ func TestBuiltInGenerationErrorWithAppendedMessages(t *testing.T) {
 	const messageMarker = "combined-request-provider-marker"
 	engine := newBuiltInGenerationErrorEngine(t, http.StatusUnprocessableEntity,
 		`{"error":{"message":"`+messageMarker+`"}}`)
-	request := generationErrorRunRequest()
+	request := simpleGenerationRequest()
 	request.AppendedMessages = []promptkit.RenderedMessage{
 		{Role: promptkit.RoleAssistant, Content: "previous response"},
 		{Role: promptkit.RoleUser, Content: "consumer correction"},
@@ -63,7 +63,7 @@ func TestBuiltInRepairGenerationError(t *testing.T) {
 		messageMarker = "repair-message-marker"
 	)
 	calls := 0
-	config := contractConfig(frameworkSchemaDir)
+	config := simpleConfig("message")
 	config.HTTPClient = &http.Client{Transport: roundTripFunc(func(*http.Request) (*http.Response, error) {
 		calls++
 		if calls == 1 {
@@ -77,7 +77,7 @@ func TestBuiltInRepairGenerationError(t *testing.T) {
 	if err != nil {
 		t.Fatalf("NewEngine: %v", err)
 	}
-	req := generationErrorRunRequest()
+	req := simpleGenerationRequest()
 	req.Validation = &promptkit.OutputContract{
 		Format:         promptkit.FormatJSON,
 		ValidationMode: promptkit.ValidationJSON,
@@ -96,7 +96,7 @@ func TestBuiltInRepairGenerationError(t *testing.T) {
 
 func TestBuiltInGenerationFailureCategories(t *testing.T) {
 	transportCause := errors.New("private transport diagnostic")
-	config := contractConfig(frameworkSchemaDir)
+	config := simpleConfig("message")
 	config.HTTPClient = &http.Client{Transport: roundTripFunc(func(*http.Request) (*http.Response, error) {
 		return nil, transportCause
 	})}
@@ -104,7 +104,7 @@ func TestBuiltInGenerationFailureCategories(t *testing.T) {
 	if err != nil {
 		t.Fatal(err)
 	}
-	result, err := engine.Run(context.Background(), generationErrorRunRequest())
+	result, err := engine.Run(context.Background(), simpleGenerationRequest())
 	if result != nil || !errors.Is(err, promptkit.ErrLLMGenerate) || !errors.Is(err, promptkit.ErrTransport) || !errors.Is(err, transportCause) {
 		t.Fatalf("transport result=%#v, error=%v", result, err)
 	}
@@ -122,7 +122,7 @@ func TestBuiltInGenerationFailureCategories(t *testing.T) {
 	} {
 		t.Run(tc.name, func(t *testing.T) {
 			engine := newBuiltInGenerationErrorEngine(t, http.StatusOK, tc.body)
-			result, err := engine.Run(context.Background(), generationErrorRunRequest())
+			result, err := engine.Run(context.Background(), simpleGenerationRequest())
 			if result != nil || !errors.Is(err, promptkit.ErrLLMGenerate) || !errors.Is(err, promptkit.ErrMalformedResponse) || errors.Is(err, promptkit.ErrTransport) {
 				t.Fatalf("malformed result=%#v, error=%v", result, err)
 			}
@@ -139,7 +139,7 @@ func TestBuiltInGenerationPreservesContextIdentity(t *testing.T) {
 		{name: "deadline", cause: context.DeadlineExceeded},
 	} {
 		t.Run(tc.name, func(t *testing.T) {
-			config := contractConfig(frameworkSchemaDir)
+			config := simpleConfig("message")
 			config.HTTPClient = &http.Client{Transport: roundTripFunc(func(*http.Request) (*http.Response, error) {
 				return nil, tc.cause
 			})}
@@ -147,7 +147,7 @@ func TestBuiltInGenerationPreservesContextIdentity(t *testing.T) {
 			if err != nil {
 				t.Fatal(err)
 			}
-			result, err := engine.Run(context.Background(), generationErrorRunRequest())
+			result, err := engine.Run(context.Background(), simpleGenerationRequest())
 			if result != nil || !errors.Is(err, tc.cause) || !errors.Is(err, promptkit.ErrLLMGenerate) || !errors.Is(err, promptkit.ErrTransport) {
 				t.Fatalf("context result=%#v, error=%v", result, err)
 			}
@@ -165,8 +165,8 @@ func TestInjectedGenerationFailureCategories(t *testing.T) {
 		{name: "arbitrary error", client: &fakeLLMClient{err: errors.New("injected failure")}},
 	} {
 		t.Run(tc.name, func(t *testing.T) {
-			engine := newContractEngineWithOptions(t, frameworkSchemaDir, promptkit.WithLLMClient(tc.client))
-			result, err := engine.Run(context.Background(), generationErrorRunRequest())
+			engine := newSimpleEngine(t, "message", promptkit.WithLLMClient(tc.client))
+			result, err := engine.Run(context.Background(), simpleGenerationRequest())
 			if result != nil || !errors.Is(err, promptkit.ErrLLMGenerate) || errors.Is(err, promptkit.ErrTransport) || errors.Is(err, promptkit.ErrMalformedResponse) != tc.malformed {
 				t.Fatalf("injected result=%#v, error=%v", result, err)
 			}
@@ -207,7 +207,7 @@ func assertGenerationError(t *testing.T, err error, statusCode int, code, provid
 func newBuiltInGenerationErrorEngine(t *testing.T, statusCode int, body string) *promptkit.Engine {
 	t.Helper()
 
-	config := contractConfig(frameworkSchemaDir)
+	config := simpleConfig("message")
 	noRetries := 0
 	config.TransientRetries = &noRetries
 	config.HTTPClient = &http.Client{Transport: roundTripFunc(func(*http.Request) (*http.Response, error) {
@@ -224,12 +224,6 @@ func newBuiltInGenerationErrorEngine(t *testing.T, statusCode int, body string)
 	return engine
 }
 
-func generationErrorRunRequest() promptkit.RunRequest {
-	return promptkit.RunRequest{
-		PromptID: frameworkMarkdownSummaryPromptID,
-		Inputs: map[string]promptkit.ArtifactRef{
-			"transcript": promptkit.Inline("Rin opens the gate."),
-			"glossary":   promptkit.Inline("gate: A guarded passage."),
-		},
-	}
+func simpleGenerationRequest() promptkit.RunRequest {
+	return promptkit.RunRequest{PromptID: "prompt"}
 }

go.mod

@@ -3,10 +3,13 @@ module gitea.maximumdirect.net/eric/promptkit
 go 1.25.5
 
 require (
-	gitea.maximumdirect.net/eric/promptkit-backend-openrouter/v2 v2.20260926.0
-	gitea.maximumdirect.net/eric/promptkit-backend-rakestrawhome/v2 v2.20260926.0
+	gitea.maximumdirect.net/eric/ConfigKit v0.5.0
+	gitea.maximumdirect.net/eric/promptkit-backend-openrouter/v3 v3.20260930.0
+	gitea.maximumdirect.net/eric/promptkit-backend-rakestrawhome/v3 v3.20260930.0
 	github.com/santhosh-tekuri/jsonschema/v6 v6.0.2
-	gopkg.in/yaml.v3 v3.0.1
 )
 
-require golang.org/x/text v0.14.0 // indirect
+require (
+	go.yaml.in/yaml/v4 v4.0.0-rc.6 // indirect
+	golang.org/x/text v0.14.0 // indirect
+)

go.sum

@@ -1,14 +1,16 @@
-gitea.maximumdirect.net/eric/promptkit-backend-openrouter/v2 v2.20260926.0 h1:wdab+R+lgMZxzYwhbAuCrW7zdSQ1cW9ovBR6UzLmZR4=
-gitea.maximumdirect.net/eric/promptkit-backend-openrouter/v2 v2.20260926.0/go.mod h1:a3VBbh9oaGXD6ruxhtwHj+AWW6DY/SSyby1QtMmYSUo=
-gitea.maximumdirect.net/eric/promptkit-backend-rakestrawhome/v2 v2.20260926.0 h1:baCCIB6Ee5t0S4Zc++NTBIPcJEv5UPS6DlSrpZfykwg=
-gitea.maximumdirect.net/eric/promptkit-backend-rakestrawhome/v2 v2.20260926.0/go.mod h1:mtgD1E0SGm0e/I8Ffhz+AYX7GN7RKUWJXehNFIKHs4Y=
+gitea.maximumdirect.net/eric/ConfigKit v0.5.0 h1:2KwG10+kApWM3avOoYA+p768xcbHUp7tQ2rqizBNpyg=
+gitea.maximumdirect.net/eric/ConfigKit v0.5.0/go.mod h1:tYWpsrbLyu05r8+1MapWp5fN6ZrX9I8hU2xEPedYmYk=
+gitea.maximumdirect.net/eric/promptkit-backend-openrouter/v3 v3.20260930.0 h1:lzfCDbzJQRGzIlRPRprnAV9hVVL5zUQy80VMQ0kbYa0=
+gitea.maximumdirect.net/eric/promptkit-backend-openrouter/v3 v3.20260930.0/go.mod h1:HjS0f+3q0IdHCTEz+VVAEgIwIWJFAZUjuKdAtvtqKdg=
+gitea.maximumdirect.net/eric/promptkit-backend-rakestrawhome/v3 v3.20260930.0 h1:h12ZTRldAmpLAomj0oQRGteFxHLN1LPE6XDl9zJNbm8=
+gitea.maximumdirect.net/eric/promptkit-backend-rakestrawhome/v3 v3.20260930.0/go.mod h1:OEFBeKdjTsLzqJwLmXI2O5gG3r64FktcVJVb3mBrRfg=
 github.com/dlclark/regexp2 v1.11.0 h1:G/nrcoOa7ZXlpoa/91N3X7mM3r8eIlMBBJZvsz/mxKI=
 github.com/dlclark/regexp2 v1.11.0/go.mod h1:DHkYz0B9wPfa6wondMfaivmHpzrQ3v9q8cnmRbL6yW8=
 github.com/santhosh-tekuri/jsonschema/v6 v6.0.2 h1:KRzFb2m7YtdldCEkzs6KqmJw4nqEVZGK7IN2kJkjTuQ=
 github.com/santhosh-tekuri/jsonschema/v6 v6.0.2/go.mod h1:JXeL+ps8p7/KNMjDQk3TCwPpBy0wYklyWTfbkIzdIFU=
+go.yaml.in/yaml/v4 v4.0.0-rc.6 h1:1h7H1ohdUh93/FyE4YaDa1Zh64K6VVbjF4K6WUxMtH4=
+go.yaml.in/yaml/v4 v4.0.0-rc.6/go.mod h1:aZqd9kCMsGL7AuUv/m/PvWLdg5sjJsZ4oHDEnfPPfY0=
 golang.org/x/text v0.14.0 h1:ScX5w1eTa3QqT8oi6+ziP7dTV1S2+ALU0bI+0zXKWiQ=
 golang.org/x/text v0.14.0/go.mod h1:18ZOQIKpY8NJVqYksKHtTdi31H5itFRjB5/qKTNYzSU=
-gopkg.in/check.v1 v0.0.0-20161208181325-20d25e280405 h1:yhCVgyC4o1eVCa2tZl7eS0r+SDo693bJlVdllGtEeKM=
-gopkg.in/check.v1 v0.0.0-20161208181325-20d25e280405/go.mod h1:Co6ibVJAznAaIkqp8huTwlJQCZ016jof/cbN4VW5Yz0=
 gopkg.in/yaml.v3 v3.0.1 h1:fxVm/GzAzEWqLHuvctI91KS9hhNmmWOoWu0XTYJS7CA=
 gopkg.in/yaml.v3 v3.0.1/go.mod h1:K4uyk7z7BCEPqu6E+C64Yfv1cQ7kz7rIZviUmN+EgEM=

internal/backend/registry.go

@@ -5,63 +5,40 @@ package backend
 import (
 	"errors"
 	"fmt"
-	"regexp"
-	"sort"
-	"strings"
 
 	"gitea.maximumdirect.net/eric/promptkit/internal/domain"
 	"gitea.maximumdirect.net/eric/promptkit/internal/jsonvalue"
-	"gitea.maximumdirect.net/eric/promptkit/internal/llm"
 )
 
 const (
-	// OpenRouterID is the reserved ID of Promptkit's built-in OpenRouter
-	// backend.
+	// OpenRouterID identifies the maintained OpenRouter backend.
 	OpenRouterID = "openrouter"
-	// RakestrawHomeID is the reserved ID of Promptkit's built-in Rakestrawhome
-	// backend.
+	// RakestrawHomeID identifies the maintained Rakestrawhome backend.
 	RakestrawHomeID = "rakestrawhome"
-
-	defaultQueueCapacity = 1024
 )
 
 // ErrBackendNotFound identifies a registry lookup for an unknown backend ID.
 var ErrBackendNotFound = errors.New("backend not found")
 
-var environmentVariableName = regexp.MustCompile(`^[A-Za-z_][A-Za-z0-9_]*$`)
-
 // Registry is an immutable collection of validated backend definitions.
 type Registry struct {
 	backends map[string]domain.Backend
 }
 
-// NewRegistry constructs a registry containing maintained definitions followed
-// by consumer additions. Every ID must be unique across both groups.
-func NewRegistry(maintained, additions []domain.Backend) (*Registry, error) {
-	registry := &Registry{
-		backends: make(map[string]domain.Backend, len(maintained)+len(additions)),
-	}
-
-	definitions := make([]domain.Backend, 0, len(maintained)+len(additions))
-	definitions = append(definitions, maintained...)
-	definitions = append(definitions, additions...)
-
-	for _, definition := range definitions {
-		definition.ID = strings.TrimSpace(definition.ID)
-		if definition.ID == "" {
-			return nil, errors.New("backend ID must not be blank")
-		}
-		if _, exists := registry.backends[definition.ID]; exists {
-			return nil, fmt.Errorf("backend ID %q is already registered", definition.ID)
-		}
-
-		normalized, err := NormalizeDefinition(definition)
+// NewEffectiveRegistry stores already-validated effective backend definitions
+// under their exact configuration keys. Configuration validation and
+// normalization precede this ownership boundary.
+func NewEffectiveRegistry(definitions map[string]domain.Backend) (*Registry, error) {
+	registry := &Registry{backends: make(map[string]domain.Backend, len(definitions))}
+	for id, definition := range definitions {
+		params, err := jsonvalue.CopyMap(definition.ExtraParams)
 		if err != nil {
-			return nil, err
+			return nil, fmt.Errorf("backend %q extra parameters: %w", id, err)
 		}
-		registry.backends[normalized.ID] = normalized
+		definition.ID = id
+		definition.ExtraParams = params
+		registry.backends[id] = definition
 	}
-
 	return registry, nil
 }
 
@@ -100,80 +77,3 @@ func (r *Registry) CapacityPolicies() map[string]domain.BackendCapacityPolicy {
 	}
 	return policies
 }
-
-// NormalizeDefinition validates and defensively copies one backend definition.
-func NormalizeDefinition(definition domain.Backend) (domain.Backend, error) {
-	endpoint, err := domain.NormalizeOpenAICompatibleBaseEndpoint(definition.Endpoint)
-	if err != nil {
-		return domain.Backend{}, fmt.Errorf("backend %q endpoint: %w", definition.ID, err)
-	}
-	definition.Endpoint = endpoint
-
-	definition.APIKeyEnv = strings.TrimSpace(definition.APIKeyEnv)
-	if definition.APIKeyEnv != "" && !environmentVariableName.MatchString(definition.APIKeyEnv) {
-		return domain.Backend{}, fmt.Errorf(
-			"backend %q api key environment variable %q is invalid",
-			definition.ID,
-			definition.APIKeyEnv,
-		)
-	}
-
-	if definition.ConcurrencyLimit < 0 {
-		return domain.Backend{}, fmt.Errorf(
-			"backend %q concurrency limit must not be negative",
-			definition.ID,
-		)
-	}
-	if definition.QueueCapacity < 0 {
-		return domain.Backend{}, fmt.Errorf(
-			"backend %q queue capacity must not be negative",
-			definition.ID,
-		)
-	}
-	if definition.ConcurrencyLimit == 0 {
-		if definition.QueueCapacitySet {
-			return domain.Backend{}, fmt.Errorf(
-				"backend %q queue capacity requires a positive concurrency limit",
-				definition.ID,
-			)
-		}
-		definition.QueueCapacity = 0
-	} else {
-		if !definition.QueueCapacitySet {
-			definition.QueueCapacity = defaultQueueCapacity
-			definition.QueueCapacitySet = true
-		}
-		maxInt := int(^uint(0) >> 1)
-		if definition.QueueCapacity > maxInt-definition.ConcurrencyLimit {
-			return domain.Backend{}, fmt.Errorf(
-				"backend %q total capacity overflows int",
-				definition.ID,
-			)
-		}
-	}
-
-	keys := make([]string, 0, len(definition.ExtraParams))
-	for key := range definition.ExtraParams {
-		keys = append(keys, key)
-	}
-	sort.Strings(keys)
-	for _, key := range keys {
-		if key == "" {
-			return domain.Backend{}, fmt.Errorf("backend %q extra parameter key must not be empty", definition.ID)
-		}
-		if llm.IsReservedOpenAIChatRequestField(key) {
-			return domain.Backend{}, fmt.Errorf(
-				"backend %q extra parameter %q collides with a reserved request field",
-				definition.ID,
-				key,
-			)
-		}
-	}
-
-	extraParams, err := jsonvalue.CopyMap(definition.ExtraParams)
-	if err != nil {
-		return domain.Backend{}, fmt.Errorf("backend %q extra parameters: %w", definition.ID, err)
-	}
-	definition.ExtraParams = extraParams
-	return definition, nil
-}

internal/backend/registry_test.go

@@ -3,374 +3,54 @@ package backend_test
 import (
 	"errors"
 	"reflect"
-	"strings"
 	"testing"
 
 	"gitea.maximumdirect.net/eric/promptkit/internal/backend"
 	"gitea.maximumdirect.net/eric/promptkit/internal/domain"
 )
 
-const validEndpoint = "https://backend.example/v1"
-
-func TestRegistryIncludesMaintainedDefinitions(t *testing.T) {
-	maintained := []domain.Backend{
-		{ID: backend.OpenRouterID, Endpoint: validEndpoint, ConcurrencyLimit: 2, QueueCapacity: 3, QueueCapacitySet: true},
-		{ID: backend.RakestrawHomeID, Endpoint: "https://second.example/v1", ConcurrencyLimit: 4, QueueCapacity: 5, QueueCapacitySet: true},
-	}
-	registry, err := backend.NewRegistry(maintained, nil)
-	if err != nil {
-		t.Fatalf("construct registry: %v", err)
-	}
-
-	for _, expected := range maintained {
-		t.Run(expected.ID, func(t *testing.T) {
-			definition, err := registry.GetBackend(expected.ID)
-			if err != nil {
-				t.Fatalf("look up maintained definition: %v", err)
-			}
-			if !reflect.DeepEqual(definition, expected) {
-				t.Fatalf("unexpected maintained definition: %#v", definition)
-			}
-		})
-	}
-
-	policies := registry.CapacityPolicies()
-	if len(policies) != 2 ||
-		policies[backend.OpenRouterID] != (domain.BackendCapacityPolicy{
-			ConcurrencyLimit: 2,
-			QueueCapacity:    3,
-		}) ||
-		policies[backend.RakestrawHomeID] != (domain.BackendCapacityPolicy{
-			ConcurrencyLimit: 4,
-			QueueCapacity:    5,
-		}) {
-		t.Fatalf("unexpected built-in capacity policies: %#v", policies)
-	}
-}
-
-func TestRegistryNormalizesUniqueAdditionsAndIsolatesMutations(t *testing.T) {
-	nested := map[string]int{"limit": 2}
-	extraParams := map[string]any{
-		"count":  int64(7),
-		"nested": nested,
-	}
-	registry, err := backend.NewRegistry(nil, []domain.Backend{
-		{
-			ID:               " custom ",
-			Endpoint:         " https://custom.example/openai/v1 ",
-			APIKeyEnv:        " CUSTOM_API_KEY ",
-			ExtraParams:      extraParams,
-			ConcurrencyLimit: 3,
-			QueueCapacity:    2,
-			QueueCapacitySet: true,
-		},
-		{
-			ID:       "Custom",
-			Endpoint: validEndpoint,
+func TestEffectiveRegistryOwnsDefinitionsAndCapacityPolicies(t *testing.T) {
+	params := map[string]any{"nested": map[string]any{"enabled": true}}
+	registry, err := backend.NewEffectiveRegistry(map[string]domain.Backend{
+		" local.v1 ": {
+			Endpoint: "https://backend.example/v1", ExtraParams: params,
+			ConcurrencyLimit: 2, QueueCapacity: 3, QueueCapacitySet: true,
 		},
 	})
 	if err != nil {
-		t.Fatalf("construct registry: %v", err)
+		t.Fatal(err)
 	}
-
-	nested["limit"] = 99
-	extraParams["added"] = true
-
-	got, err := registry.GetBackend("custom")
-	if err != nil {
-		t.Fatalf("look up custom backend: %v", err)
+	params["nested"].(map[string]any)["enabled"] = false
+	selected, err := registry.GetBackend(" local.v1 ")
+	if err != nil || selected.ID != " local.v1 " || selected.ExtraParams["nested"].(map[string]any)["enabled"] != true {
+		t.Fatalf("effective backend was not captured under its literal ID: %+v, %v", selected, err)
 	}
-	if got.ID != "custom" ||
-		got.Endpoint != "https://custom.example/openai/v1" ||
-		got.APIKeyEnv != "CUSTOM_API_KEY" ||
-		got.ConcurrencyLimit != 3 ||
-		got.QueueCapacity != 2 ||
-		!got.QueueCapacitySet {
-		t.Fatalf("unexpected normalized definition: %#v", got)
+	selected.ExtraParams["nested"].(map[string]any)["enabled"] = false
+	again, err := registry.GetBackend(" local.v1 ")
+	if err != nil || again.ExtraParams["nested"].(map[string]any)["enabled"] != true {
+		t.Fatalf("lookup exposed registry values: %+v, %v", again, err)
 	}
-	if count, ok := got.ExtraParams["count"].(int64); !ok || count != 7 {
-		t.Fatalf("integer type or value changed: %#v", got.ExtraParams["count"])
-	}
-	gotNested, ok := got.ExtraParams["nested"].(map[string]int)
-	if !ok || gotNested["limit"] != 2 {
-		t.Fatalf("container type or value changed: %#v", got.ExtraParams["nested"])
-	}
-	if _, exists := got.ExtraParams["added"]; exists {
-		t.Fatalf("registry retained caller map: %#v", got.ExtraParams)
-	}
-
-	gotNested["limit"] = 100
-	got.ExtraParams["added"] = true
-	again, err := registry.GetBackend("custom")
-	if err != nil {
-		t.Fatalf("look up custom backend again: %v", err)
-	}
-	if again.ExtraParams["nested"].(map[string]int)["limit"] != 2 {
-		t.Fatalf("lookup exposed registry nested map: %#v", again.ExtraParams)
-	}
-	if _, exists := again.ExtraParams["added"]; exists {
-		t.Fatalf("lookup exposed registry map: %#v", again.ExtraParams)
-	}
-
-	if _, err := registry.GetBackend("Custom"); err != nil {
-		t.Fatalf("backend IDs should be case-sensitive: %v", err)
-	}
-
 	policies := registry.CapacityPolicies()
-	if len(policies) != 1 {
-		t.Fatalf("unexpected capacity policy count: %#v", policies)
-	}
-	policies["custom"] = domain.BackendCapacityPolicy{}
-	delete(policies, "custom")
-	againPolicies := registry.CapacityPolicies()
-	if againPolicies["custom"] != (domain.BackendCapacityPolicy{
-		ConcurrencyLimit: 3,
-		QueueCapacity:    2,
+	if !reflect.DeepEqual(policies, map[string]domain.BackendCapacityPolicy{
+		" local.v1 ": {ConcurrencyLimit: 2, QueueCapacity: 3},
 	}) {
-		t.Fatalf("capacity policy map mutated registry state: %#v", againPolicies)
+		t.Fatalf("capacity policy = %+v", policies)
+	}
+	delete(policies, " local.v1 ")
+	if len(registry.CapacityPolicies()) != 1 {
+		t.Fatal("capacity policy map exposed registry state")
 	}
 }
 
-func TestNewRegistryNormalizesCapacityPolicy(t *testing.T) {
-	maxInt := int(^uint(0) >> 1)
-	tests := []struct {
-		name       string
-		definition domain.Backend
-		want       domain.BackendCapacityPolicy
-		wantSet    bool
-		wantError  bool
-	}{
-		{
-			name:       "unlimited when omitted",
-			definition: domain.Backend{},
-		},
-		{
-			name: "default queue",
-			definition: domain.Backend{
-				ConcurrencyLimit: 2,
-			},
-			want: domain.BackendCapacityPolicy{
-				ConcurrencyLimit: 2,
-				QueueCapacity:    1024,
-			},
-			wantSet: true,
-		},
-		{
-			name: "explicit zero queue",
-			definition: domain.Backend{
-				ConcurrencyLimit: 2,
-				QueueCapacitySet: true,
-			},
-			want: domain.BackendCapacityPolicy{
-				ConcurrencyLimit: 2,
-			},
-			wantSet: true,
-		},
-		{
-			name: "negative concurrency limit",
-			definition: domain.Backend{
-				ConcurrencyLimit: -1,
-			},
-			wantError: true,
-		},
-		{
-			name: "negative queue capacity",
-			definition: domain.Backend{
-				ConcurrencyLimit: 1,
-				QueueCapacity:    -1,
-				QueueCapacitySet: true,
-			},
-			wantError: true,
-		},
-		{
-			name: "queue without limit",
-			definition: domain.Backend{
-				QueueCapacitySet: true,
-			},
-			wantError: true,
-		},
-		{
-			name: "total overflow",
-			definition: domain.Backend{
-				ConcurrencyLimit: maxInt,
-				QueueCapacity:    1,
-				QueueCapacitySet: true,
-			},
-			wantError: true,
-		},
-	}
-
-	for _, tc := range tests {
-		t.Run(tc.name, func(t *testing.T) {
-			tc.definition.ID = "custom"
-			tc.definition.Endpoint = validEndpoint
-			registry, err := backend.NewRegistry(nil, []domain.Backend{tc.definition})
-			if tc.wantError {
-				if err == nil {
-					t.Fatal("expected invalid capacity policy error")
-				}
-				return
-			}
-			if err != nil {
-				t.Fatalf("construct registry: %v", err)
-			}
-
-			definition, err := registry.GetBackend("custom")
-			if err != nil {
-				t.Fatalf("look up custom backend: %v", err)
-			}
-			if definition.ConcurrencyLimit != tc.want.ConcurrencyLimit ||
-				definition.QueueCapacity != tc.want.QueueCapacity ||
-				definition.QueueCapacitySet != tc.wantSet {
-				t.Fatalf("normalized capacity=(%d, %d, %t), want (%d, %d, %t)",
-					definition.ConcurrencyLimit,
-					definition.QueueCapacity,
-					definition.QueueCapacitySet,
-					tc.want.ConcurrencyLimit,
-					tc.want.QueueCapacity,
-					tc.wantSet,
-				)
-			}
-			policies := registry.CapacityPolicies()
-			got, ok := policies["custom"]
-			if ok != tc.wantSet || got != tc.want {
-				t.Fatalf("capacity policy=(%#v, %t), want (%#v, %t)", got, ok, tc.want, tc.wantSet)
-			}
-		})
-	}
-}
-
-func TestNewRegistryRejectsDuplicateIDs(t *testing.T) {
-	tests := []struct {
-		name      string
-		additions []domain.Backend
-		wantID    string
-	}{
-		{
-			name:      "OpenRouter collision after normalization",
-			additions: []domain.Backend{{ID: " openrouter "}},
-			wantID:    backend.OpenRouterID,
-		},
-		{
-			name:      "Rakestrawhome collision after normalization",
-			additions: []domain.Backend{{ID: " rakestrawhome "}},
-			wantID:    backend.RakestrawHomeID,
-		},
-		{
-			name: "consumer collision after normalization",
-			additions: []domain.Backend{
-				{ID: "custom", Endpoint: validEndpoint},
-				{ID: " custom ", Endpoint: "https://other.example/v1"},
-			},
-			wantID: "custom",
-		},
-	}
-
-	for _, tc := range tests {
-		t.Run(tc.name, func(t *testing.T) {
-			_, err := backend.NewRegistry(nil, tc.additions)
-			if err == nil {
-				t.Fatal("expected duplicate ID error")
-			}
-			if !strings.Contains(err.Error(), tc.wantID) {
-				t.Fatalf("expected error to identify %q, got %v", tc.wantID, err)
-			}
-		})
-	}
-}
-
-func TestNewRegistryValidatesIDs(t *testing.T) {
-	for _, id := range []string{"", " \t\n "} {
-		t.Run(id, func(t *testing.T) {
-			_, err := backend.NewRegistry(nil, []domain.Backend{{
-				ID:       id,
-				Endpoint: validEndpoint,
-			}})
-			if err == nil {
-				t.Fatal("expected blank ID error")
-			}
-		})
-	}
-}
-
-func TestNewRegistryValidatesEndpoints(t *testing.T) {
-	tests := []struct {
-		name     string
-		endpoint string
-	}{
-		{name: "blank", endpoint: ""},
-		{name: "relative", endpoint: "/v1"},
-		{name: "missing host", endpoint: "https:///v1"},
-		{name: "unsupported scheme", endpoint: "ftp://backend.example/v1"},
-		{name: "user information", endpoint: "https://user@backend.example/v1"},
-		{name: "query", endpoint: "https://backend.example/v1?mode=chat"},
-		{name: "empty query", endpoint: "https://backend.example/v1?"},
-		{name: "fragment", endpoint: "https://backend.example/v1#chat"},
-		{name: "empty fragment", endpoint: "https://backend.example/v1#"},
-	}
-
-	for _, tc := range tests {
-		t.Run(tc.name, func(t *testing.T) {
-			_, err := backend.NewRegistry(nil, []domain.Backend{{
-				ID:       "custom",
-				Endpoint: tc.endpoint,
-			}})
-			if err == nil {
-				t.Fatal("expected invalid endpoint error")
-			}
-		})
-	}
-}
-
-func TestNewRegistryValidatesEnvironmentVariableNames(t *testing.T) {
-	for _, name := range []string{"1API_KEY", "API-KEY", "API KEY", "ÅPI_KEY"} {
-		t.Run(name, func(t *testing.T) {
-			_, err := backend.NewRegistry(nil, []domain.Backend{{
-				ID:        "custom",
-				Endpoint:  validEndpoint,
-				APIKeyEnv: name,
-			}})
-			if err == nil {
-				t.Fatal("expected invalid environment-variable name error")
-			}
-		})
-	}
-}
-
-func TestNewRegistryRejectsInvalidAndReservedExtraParameters(t *testing.T) {
-	tests := []struct {
-		name        string
-		extraParams map[string]any
-	}{
-		{name: "unsupported value", extraParams: map[string]any{"value": make(chan int)}},
-		{name: "reserved key", extraParams: map[string]any{"model": "override"}},
-	}
-
-	for _, tc := range tests {
-		t.Run(tc.name, func(t *testing.T) {
-			_, err := backend.NewRegistry(nil, []domain.Backend{{
-				ID:          "custom",
-				Endpoint:    validEndpoint,
-				ExtraParams: tc.extraParams,
-			}})
-			if err == nil {
-				t.Fatal("expected invalid extra parameters error")
-			}
-		})
-	}
-}
-
-func TestRegistryLookupReportsNotFound(t *testing.T) {
-	registry, err := backend.NewRegistry(nil, nil)
+func TestEffectiveRegistryMissingBackend(t *testing.T) {
+	registry, err := backend.NewEffectiveRegistry(nil)
 	if err != nil {
-		t.Fatalf("construct registry: %v", err)
+		t.Fatal(err)
 	}
-
-	_, err = registry.GetBackend("missing")
-	if !errors.Is(err, backend.ErrBackendNotFound) {
-		t.Fatalf("expected ErrBackendNotFound, got %v", err)
+	if _, err := registry.GetBackend("missing"); !errors.Is(err, backend.ErrBackendNotFound) {
+		t.Fatalf("missing backend error = %v", err)
 	}
-	if !strings.Contains(err.Error(), "missing") {
-		t.Fatalf("expected error to identify backend, got %v", err)
+	if _, err := registry.GetBackend("local.v1"); !errors.Is(err, backend.ErrBackendNotFound) {
+		t.Fatalf("trimmed lookup unexpectedly matched: %v", err)
 	}
 }

internal/catalog/catalog.go

@@ -1,249 +1,52 @@
-// Package catalog validates immutable maintained backend catalog assets.
+// Package catalog selects the maintained configuration assets supplied with
+// PromptKit. ConfigKit owns their composition and effective validation.
 package catalog
 
 import (
-	"bytes"
 	"context"
-	"encoding/json"
-	"errors"
 	"fmt"
-	"io"
 	"io/fs"
-	"path"
-	"sort"
-	"strings"
 
+	"gitea.maximumdirect.net/eric/ConfigKit"
+	openrouter "gitea.maximumdirect.net/eric/promptkit-backend-openrouter/v3"
+	rakestrawhome "gitea.maximumdirect.net/eric/promptkit-backend-rakestrawhome/v3"
 	"gitea.maximumdirect.net/eric/promptkit/internal/backend"
-	"gitea.maximumdirect.net/eric/promptkit/internal/domain"
-	"gitea.maximumdirect.net/eric/promptkit/internal/profile"
+	"gitea.maximumdirect.net/eric/promptkit/internal/filecatalog"
 )
 
-// Source identifies one immutable backend catalog asset tree.
-type Source struct {
-	Name              string
-	ExpectedBackendID string
-	FS                fs.FS
-	Root              string
-}
-
-// Set is the validated maintained backend and raw profile catalog.
-type Set struct {
-	Backends   []domain.Backend
-	Profiles   profile.Repository
-	profileIDs []string
-}
-
-// Load validates and combines immutable catalog sources in source order.
-func Load(sources ...Source) (Set, error) {
-	if len(sources) == 0 {
-		return Set{}, errors.New("at least one catalog source is required")
-	}
-	loaded := Set{Backends: make([]domain.Backend, 0, len(sources))}
-	names := map[string]bool{}
-	backendIDs := map[string]bool{}
-	profileIDs := map[string]bool{}
-	for _, source := range sources {
-		if err := validateSource(source, names); err != nil {
-			return Set{}, err
-		}
-		names[source.Name] = true
-		definition, err := loadBackend(source)
-		if err != nil {
-			return Set{}, err
-		}
-		if backendIDs[definition.ID] {
-			return Set{}, fmt.Errorf("catalog %s: backend ID duplicates an earlier catalog", source.Name)
-		}
-		backendIDs[definition.ID] = true
-		repository, metadata, err := profile.LoadFSRepository(context.Background(), source.FS, path.Join(source.Root, "profiles"))
-		if err != nil {
-			return Set{}, fmt.Errorf("catalog %s: %w", source.Name, err)
-		}
-		if len(metadata) == 0 {
-			return Set{}, fmt.Errorf("catalog %s: profiles must not be empty", source.Name)
-		}
-		resolvingRepository := profile.NewResolvingRepository(repository)
-		for _, entry := range metadata {
-			if strings.HasPrefix(entry.ID, "promptkit-") {
-				return Set{}, fmt.Errorf("catalog %s: %s uses the reserved promptkit- profile ID prefix", source.Name, entry.Path)
-			}
-			if profileIDs[entry.ID] {
-				return Set{}, fmt.Errorf("catalog %s: %s duplicates an earlier profile ID", source.Name, entry.Path)
-			}
-			if containsField(entry.ExplicitFields, "endpoint") || containsField(entry.ExplicitFields, "api_key_env") {
-				return Set{}, fmt.Errorf("catalog %s: %s contains connection metadata", source.Name, entry.Path)
-			}
-			value, err := repository.GetProfile(context.Background(), entry.ID)
-			if err != nil {
-				return Set{}, fmt.Errorf("catalog %s: %s: %w", source.Name, entry.Path, err)
-			}
-			if err := rejectSecretKeys(value.ExtraParams); err != nil {
-				return Set{}, fmt.Errorf("catalog %s: %s: prohibited extra parameter key", source.Name, entry.Path)
-			}
-			resolved, err := resolvingRepository.GetProfile(context.Background(), entry.ID)
-			if err != nil {
-				return Set{}, fmt.Errorf("catalog %s: %s has invalid profile inheritance", source.Name, entry.Path)
-			}
-			if resolved.BackendID != definition.ID {
-				return Set{}, fmt.Errorf("catalog %s: %s selects a different backend", source.Name, entry.Path)
-			}
-			profileIDs[entry.ID] = true
-			loaded.profileIDs = append(loaded.profileIDs, entry.ID)
-		}
-		if loaded.Profiles == nil {
-			loaded.Profiles = repository
-		} else {
-			loaded.Profiles = profile.NewOverlayRepository(loaded.Profiles, repository)
-		}
-		loaded.Backends = append(loaded.Backends, definition)
-	}
-	sort.Strings(loaded.profileIDs)
-	return loaded, nil
-}
-
-func validateSource(source Source, names map[string]bool) error {
-	if strings.TrimSpace(source.Name) == "" || source.Name != strings.TrimSpace(source.Name) {
-		return errors.New("catalog source name must not be blank")
-	}
-	if names[source.Name] {
-		return fmt.Errorf("duplicate catalog source name %q", source.Name)
-	}
-	if source.FS == nil {
-		return fmt.Errorf("catalog %s: filesystem is nil", source.Name)
-	}
-	if source.Root == "." || source.Root == "" || !fs.ValidPath(source.Root) {
-		return fmt.Errorf("catalog %s: asset root is invalid", source.Name)
-	}
-	if strings.TrimSpace(source.ExpectedBackendID) == "" {
-		return fmt.Errorf("catalog %s: expected backend ID is blank", source.Name)
-	}
-	return validateLayout(source)
-}
-
-func validateLayout(source Source) error {
-	manifestPath := path.Join(source.Root, "backend.json")
-	profilesRoot := path.Join(source.Root, "profiles")
-	return fs.WalkDir(source.FS, source.Root, func(assetPath string, entry fs.DirEntry, err error) error {
-		if err != nil {
-			return err
-		}
-		if assetPath == source.Root {
-			if !entry.IsDir() {
-				return fmt.Errorf("catalog %s: invalid asset path %s", source.Name, assetPath)
-			}
-			return nil
-		}
-		if entry.IsDir() {
-			if assetPath == profilesRoot || strings.HasPrefix(assetPath, profilesRoot+"/") {
-				return nil
-			}
-			return fmt.Errorf("catalog %s: invalid asset path %s", source.Name, assetPath)
-		}
-		if assetPath == manifestPath && entry.Type().IsRegular() {
-			return nil
-		}
-		if strings.HasPrefix(assetPath, profilesRoot+"/") && entry.Type().IsRegular() && strings.HasSuffix(assetPath, ".yml") {
-			return nil
-		}
-		return fmt.Errorf("catalog %s: invalid asset path %s", source.Name, assetPath)
-	})
-}
-
-func loadBackend(source Source) (domain.Backend, error) {
-	data, err := fs.ReadFile(source.FS, path.Join(source.Root, "backend.json"))
+// Underlays selects external catalogs followed by PromptKit-owned profiles.
+// Neither group is interpreted before the final effective configuration loads.
+func Underlays() ([]configkit.Underlay, error) {
+	openrouterInputs, err := assetInputs("OpenRouter catalog", openrouter.FS(), openrouter.Root)
 	if err != nil {
-		return domain.Backend{}, fmt.Errorf("catalog %s: backend.json: %w", source.Name, err)
+		return nil, err
 	}
-	type manifest struct {
-		SchemaVersion    *int            `json:"schema_version"`
-		ID               *string         `json:"id"`
-		Endpoint         *string         `json:"endpoint"`
-		APIKeyEnv        *string         `json:"api_key_env"`
-		ConcurrencyLimit *int            `json:"concurrency_limit"`
-		QueueCapacity    *int            `json:"queue_capacity"`
-		ExtraParams      json.RawMessage `json:"extra_params"`
-	}
-	decoder := json.NewDecoder(bytes.NewReader(data))
-	decoder.DisallowUnknownFields()
-	var value manifest
-	if err := decoder.Decode(&value); err != nil {
-		return domain.Backend{}, fmt.Errorf("catalog %s: backend.json: invalid manifest", source.Name)
-	}
-	var trailing any
-	if err := decoder.Decode(&trailing); !errors.Is(err, io.EOF) {
-		return domain.Backend{}, fmt.Errorf("catalog %s: backend.json: invalid manifest", source.Name)
-	}
-	if value.SchemaVersion == nil || *value.SchemaVersion != 1 || value.ID == nil || value.Endpoint == nil || value.APIKeyEnv == nil || value.ConcurrencyLimit == nil || value.QueueCapacity == nil || value.ExtraParams == nil {
-		return domain.Backend{}, fmt.Errorf("catalog %s: backend.json: required field is missing or unsupported", source.Name)
-	}
-	if *value.ID != source.ExpectedBackendID {
-		return domain.Backend{}, fmt.Errorf("catalog %s: backend ID does not match expected ID", source.Name)
-	}
-	if strings.TrimSpace(*value.APIKeyEnv) == "" {
-		return domain.Backend{}, fmt.Errorf("catalog %s: backend.json: api key environment variable must not be blank", source.Name)
-	}
-	extraParams, err := decodeExtraParams(value.ExtraParams)
+	rakestrawhomeInputs, err := assetInputs("Rakestrawhome catalog", rakestrawhome.FS(), rakestrawhome.Root)
 	if err != nil {
-		return domain.Backend{}, fmt.Errorf("catalog %s: backend.json: invalid extra parameters", source.Name)
+		return nil, err
 	}
-	if err := rejectSecretKeys(extraParams); err != nil {
-		return domain.Backend{}, fmt.Errorf("catalog %s: backend.json: prohibited extra parameter key", source.Name)
-	}
-	normalized, err := backend.NormalizeDefinition(domain.Backend{ID: *value.ID, Endpoint: *value.Endpoint, APIKeyEnv: *value.APIKeyEnv, ExtraParams: extraParams, ConcurrencyLimit: *value.ConcurrencyLimit, QueueCapacity: *value.QueueCapacity, QueueCapacitySet: true})
+	catalogInputs := append(openrouterInputs, rakestrawhomeInputs...)
+	owned := configkit.Input{Source: configkit.Mapping("PromptKit-owned profiles", map[string]any{
+		"profiles": map[string]any{
+			"promptkit-openrouter-standard": map[string]any{"extends": "gemini-flash-latest"},
+			"promptkit-openrouter-auto":     map[string]any{"backend": backend.OpenRouterID, "model": "openrouter/auto"},
+		},
+	})}
+	return []configkit.Underlay{{Inputs: catalogInputs}, {Inputs: []configkit.Input{owned}}}, nil
+}
+
+func assetInputs(label string, filesystem fs.FS, root string) ([]configkit.Input, error) {
+	files, err := filecatalog.FindFSYAMLFiles(context.Background(), filesystem, root)
 	if err != nil {
-		return domain.Backend{}, fmt.Errorf("catalog %s: backend.json: invalid backend definition", source.Name)
+		return nil, fmt.Errorf("discover %s configuration: %w", label, err)
 	}
-	return normalized, nil
-}
-
-func decodeExtraParams(data []byte) (map[string]any, error) {
-	if bytes.Equal(bytes.TrimSpace(data), []byte("null")) {
-		return nil, nil
-	}
-	decoder := json.NewDecoder(bytes.NewReader(data))
-	decoder.UseNumber()
-	var value map[string]any
-	if err := decoder.Decode(&value); err != nil || value == nil {
-		return nil, errors.New("extra parameters must be an object or null")
-	}
-	var trailing any
-	if err := decoder.Decode(&trailing); !errors.Is(err, io.EOF) {
-		return nil, errors.New("extra parameters must contain exactly one JSON value")
-	}
-	return value, nil
-}
-
-func containsField(fields []string, target string) bool {
-	for _, field := range fields {
-		if field == target {
-			return true
-		}
-	}
-	return false
-}
-
-func rejectSecretKeys(value map[string]any) error {
-	return rejectSecretValue(value)
-}
-
-func rejectSecretValue(value any) error {
-	switch value := value.(type) {
-	case map[string]any:
-		for key, child := range value {
-			switch strings.ToLower(key) {
-			case "api_key", "apikey", "authorization", "credential", "credentials", "password", "secret", "token", "access_token":
-				return errors.New("prohibited key")
-			}
-			if err := rejectSecretValue(child); err != nil {
-				return err
-			}
-		}
-	case []any:
-		for _, child := range value {
-			if err := rejectSecretValue(child); err != nil {
-				return err
-			}
-		}
-	}
-	return nil
+	namespace := configkit.NewFilesystem(label, filesystem)
+	inputs := make([]configkit.Input, 0, len(files))
+	for _, name := range files {
+		inputs = append(inputs, configkit.Input{
+			Source:     namespace.File(name),
+			Filesystem: &configkit.FilesystemContext{FS: &namespace, Root: root},
+		})
+	}
+	return inputs, nil
 }

internal/catalog/catalog_test.go

@@ -2,355 +2,67 @@ package catalog
 
 import (
 	"context"
-	"encoding/json"
-	"fmt"
-	"io/fs"
-	"strings"
+	"errors"
 	"testing"
-	"testing/fstest"
 
-	openrouter "gitea.maximumdirect.net/eric/promptkit-backend-openrouter/v2"
-	rakestrawhome "gitea.maximumdirect.net/eric/promptkit-backend-rakestrawhome/v2"
+	"gitea.maximumdirect.net/eric/ConfigKit"
+	"gitea.maximumdirect.net/eric/promptkit/internal/configuration"
 )
 
-func TestLoadPublishedCatalogs(t *testing.T) {
-	loaded, err := Load(
-		Source{Name: "OpenRouter", ExpectedBackendID: "openrouter", FS: openrouter.FS(), Root: openrouter.Root},
-		Source{Name: "Rakestrawhome", ExpectedBackendID: "rakestrawhome", FS: rakestrawhome.FS(), Root: rakestrawhome.Root},
-	)
+func TestPublishedCatalogsResolveThroughEffectiveConfiguration(t *testing.T) {
+	underlays, err := Underlays()
 	if err != nil {
-		t.Fatalf("load published catalogs: %v", err)
+		t.Fatal(err)
 	}
-	if loaded.Profiles == nil || len(loaded.profileIDs) == 0 {
-		t.Fatalf("published catalogs have no usable profiles: %#v", loaded)
+	state, err := configuration.Load(configkit.Input{Source: configkit.NoSource()}, underlays)
+	if err != nil {
+		t.Fatal(err)
 	}
-	if _, err := loaded.Profiles.GetProfile(context.Background(), "gemini-flash-latest"); err != nil {
-		t.Fatalf("load maintained standard-profile base: %v", err)
+	openrouter, err := state.GetBackend("openrouter")
+	if err != nil || openrouter.Endpoint != "https://openrouter.ai/api/v1" || openrouter.ConcurrencyLimit != 16 || openrouter.QueueCapacity != 1024 {
+		t.Fatalf("OpenRouter backend: %+v, %v", openrouter, err)
 	}
-
-	expectedBackends := map[string]struct {
-		endpoint         string
-		apiKeyEnv        string
-		concurrencyLimit int
-		queueCapacity    int
-	}{
-		"openrouter": {
-			endpoint:         "https://openrouter.ai/api/v1",
-			apiKeyEnv:        "OPENROUTER_API_KEY",
-			concurrencyLimit: 16,
-			queueCapacity:    1024,
-		},
-		"rakestrawhome": {
-			endpoint:         "https://inference.ai.rakestrawhome.com/v1",
-			apiKeyEnv:        "RAKESTRAWHOME_INFERENCE_API_KEY",
-			concurrencyLimit: 4,
-			queueCapacity:    1024,
-		},
+	rakestrawhome, err := state.GetBackend("rakestrawhome")
+	if err != nil || rakestrawhome.Endpoint != "https://inference.ai.rakestrawhome.com/v1" || rakestrawhome.ConcurrencyLimit != 4 {
+		t.Fatalf("Rakestrawhome backend: %+v, %v", rakestrawhome, err)
 	}
-	if len(loaded.Backends) != len(expectedBackends) {
-		t.Fatalf("published backend count = %d, want %d", len(loaded.Backends), len(expectedBackends))
-	}
-	for _, definition := range loaded.Backends {
-		expected, found := expectedBackends[definition.ID]
-		if !found {
-			t.Fatalf("unexpected published backend %q", definition.ID)
-		}
-		if definition.Endpoint != expected.endpoint ||
-			definition.APIKeyEnv != expected.apiKeyEnv ||
-			definition.ConcurrencyLimit != expected.concurrencyLimit ||
-			definition.QueueCapacity != expected.queueCapacity ||
-			!definition.QueueCapacitySet ||
-			definition.ExtraParams != nil {
-			t.Fatalf("unexpected published backend definition: %#v", definition)
-		}
-	}
-}
-
-func TestLoadRejectsInvalidSources(t *testing.T) {
-	for name, sources := range map[string][]Source{
-		"none":       nil,
-		"blank name": {{Name: " ", ExpectedBackendID: "openrouter", FS: openrouter.FS(), Root: openrouter.Root}},
-		"duplicate name": {
-			{Name: "same", ExpectedBackendID: "openrouter", FS: openrouter.FS(), Root: openrouter.Root},
-			{Name: "same", ExpectedBackendID: "rakestrawhome", FS: rakestrawhome.FS(), Root: rakestrawhome.Root},
-		},
-		"nil filesystem":         {{Name: "missing", ExpectedBackendID: "openrouter", Root: openrouter.Root}},
-		"invalid root":           {{Name: "invalid-root", ExpectedBackendID: "openrouter", FS: openrouter.FS(), Root: "."}},
-		"blank expected backend": {{Name: "blank-backend", ExpectedBackendID: " ", FS: openrouter.FS(), Root: openrouter.Root}},
+	for id, want := range map[string]string{
+		"promptkit-openrouter-standard": "~google/gemini-flash-latest",
+		"promptkit-openrouter-auto":     "openrouter/auto",
+		"rakestrawhome-gemma-4-31b":     "google/gemma-4-31b-it",
 	} {
-		t.Run(name, func(t *testing.T) {
-			if _, err := Load(sources...); err == nil {
-				t.Fatal("expected error")
-			}
-		})
-	}
-}
-
-func TestLoadRejectsInvalidLayouts(t *testing.T) {
-	tests := map[string]func(fstest.MapFS){
-		"unexpected file": func(fsys fstest.MapFS) {
-			fsys["catalog/notes.txt"] = &fstest.MapFile{Data: []byte("unexpected")}
-		},
-		"unexpected directory": func(fsys fstest.MapFS) {
-			fsys["catalog/unexpected"] = &fstest.MapFile{Mode: fs.ModeDir}
-		},
-		"nonregular manifest": func(fsys fstest.MapFS) {
-			fsys["catalog/backend.json"].Mode = fs.ModeSymlink
-		},
-		"wrong profile extension": func(fsys fstest.MapFS) {
-			fsys["catalog/profiles/extra.yaml"] = &fstest.MapFile{Data: []byte(validProfile("extra", "one"))}
-		},
-		"nonregular profile": func(fsys fstest.MapFS) {
-			fsys["catalog/profiles/one-profile.yml"].Mode = fs.ModeSymlink
-		},
-	}
-	for name, mutate := range tests {
-		t.Run(name, func(t *testing.T) {
-			fsys := validCatalogFS("one")
-			mutate(fsys)
-			if _, err := Load(testSource("one", fsys)); err == nil {
-				t.Fatal("expected invalid layout error")
-			}
-		})
-	}
-}
-
-func TestLoadRejectsInvalidManifests(t *testing.T) {
-	tests := map[string]string{
-		"malformed":             `{`,
-		"trailing value":        validManifest("one", "TEST_API_KEY", "null") + `{}`,
-		"missing fields":        `{"schema_version":1,"id":"one"}`,
-		"unsupported version":   strings.Replace(validManifest("one", "TEST_API_KEY", "null"), `"schema_version":1`, `"schema_version":2`, 1),
-		"unknown field":         strings.Replace(validManifest("one", "TEST_API_KEY", "null"), `"extra_params":null`, `"extra_params":null,"unknown":true`, 1),
-		"blank API key env":     validManifest("one", "   ", "null"),
-		"invalid API key env":   validManifest("one", "LEAK-MARKER", "null"),
-		"invalid endpoint":      strings.Replace(validManifest("one", "TEST_API_KEY", "null"), `https://one.example/v1`, `ftp://leak-marker.invalid/v1`, 1),
-		"zero concurrency":      strings.Replace(validManifest("one", "TEST_API_KEY", "null"), `"concurrency_limit":2`, `"concurrency_limit":0`, 1),
-		"non-object parameters": validManifest("one", "TEST_API_KEY", `[]`),
-		"secret parameter":      validManifest("one", "TEST_API_KEY", `{"nested":{"token":"leak-marker"}}`),
-	}
-	for name, manifest := range tests {
-		t.Run(name, func(t *testing.T) {
-			fsys := validCatalogFS("one")
-			fsys["catalog/backend.json"].Data = []byte(manifest)
-			_, err := Load(testSource("one", fsys))
-			if err == nil {
-				t.Fatal("expected invalid manifest error")
-			}
-			if strings.Contains(strings.ToLower(err.Error()), "leak-marker") {
-				t.Fatalf("catalog error exposed manifest content: %v", err)
-			}
-		})
-	}
-}
-
-func TestLoadPreservesManifestJSONNumbers(t *testing.T) {
-	fsys := validCatalogFS("one")
-	fsys["catalog/backend.json"].Data = []byte(validManifest(
-		"one",
-		"TEST_API_KEY",
-		`{"large":9007199254740993,"nested":[1.25]}`,
-	))
-	loaded, err := Load(testSource("one", fsys))
-	if err != nil {
-		t.Fatalf("load catalog: %v", err)
-	}
-	if got := loaded.Backends[0].ExtraParams["large"]; got != json.Number("9007199254740993") {
-		t.Fatalf("large JSON integer = %#v, want preserved json.Number", got)
-	}
-	nested := loaded.Backends[0].ExtraParams["nested"].([]any)
-	if nested[0] != json.Number("1.25") {
-		t.Fatalf("nested JSON number = %#v, want preserved json.Number", nested[0])
-	}
-}
-
-func TestLoadRejectsInvalidCatalogProfiles(t *testing.T) {
-	tests := map[string]func(fstest.MapFS){
-		"empty": func(fsys fstest.MapFS) {
-			delete(fsys, "catalog/profiles/one-profile.yml")
-			fsys["catalog/profiles"] = &fstest.MapFile{Mode: fs.ModeDir}
-		},
-		"malformed": func(fsys fstest.MapFS) {
-			fsys["catalog/profiles/one-profile.yml"].Data = []byte("id: [")
-		},
-		"raw API key": func(fsys fstest.MapFS) {
-			fsys["catalog/profiles/one-profile.yml"].Data = []byte(validProfile("one-profile", "one") + "api_key: leak-marker\n")
-		},
-		"endpoint field": func(fsys fstest.MapFS) {
-			fsys["catalog/profiles/one-profile.yml"].Data = []byte(validProfile("one-profile", "one") + "endpoint: ''\n")
-		},
-		"API key environment field": func(fsys fstest.MapFS) {
-			fsys["catalog/profiles/one-profile.yml"].Data = []byte(validProfile("one-profile", "one") + "api_key_env: ''\n")
-		},
-		"owner mismatch": func(fsys fstest.MapFS) {
-			fsys["catalog/profiles/one-profile.yml"].Data = []byte(validProfile("one-profile", "other"))
-		},
-		"missing base": func(fsys fstest.MapFS) {
-			fsys["catalog/profiles/one-profile.yml"].Data = []byte("id: one-profile\nbase_profile: leak-marker\n")
-		},
-		"cyclic base": func(fsys fstest.MapFS) {
-			fsys["catalog/profiles/one-profile.yml"].Data = []byte("id: one-profile\nbase_profile: second\n")
-			fsys["catalog/profiles/second.yml"] = &fstest.MapFile{Data: []byte("id: second\nbase_profile: one-profile\n")}
-		},
-		"secret profile parameter": func(fsys fstest.MapFS) {
-			fsys["catalog/profiles/one-profile.yml"].Data = []byte(validProfile("one-profile", "one") + "extra_params:\n  nested:\n    password: leak-marker\n")
-		},
-		"unknown field is redacted": func(fsys fstest.MapFS) {
-			fsys["catalog/profiles/one-profile.yml"].Data = []byte(validProfile("one-profile", "one") + "leak_marker: leak-marker\n")
-		},
-	}
-	for name, mutate := range tests {
-		t.Run(name, func(t *testing.T) {
-			fsys := validCatalogFS("one")
-			mutate(fsys)
-			_, err := Load(testSource("one", fsys))
-			if err == nil {
-				t.Fatal("expected invalid profile error")
-			}
-			if strings.Contains(strings.ToLower(err.Error()), "leak-marker") {
-				t.Fatalf("catalog error exposed profile content: %v", err)
-			}
-		})
-	}
-}
-
-func TestLoadReservesPromptkitProfilePrefixForCatalogs(t *testing.T) {
-	tests := map[string]struct {
-		profileID string
-		wantError bool
-	}{
-		"maintained name": {
-			profileID: "promptkit-openrouter-standard",
-			wantError: true,
-		},
-		"other reserved name": {
-			profileID: "promptkit-example",
-			wantError: true,
-		},
-		"ordinary name": {
-			profileID: "ordinary-profile",
-		},
-	}
-	for name, test := range tests {
-		t.Run(name, func(t *testing.T) {
-			fsys := validCatalogFS("one")
-			fsys["catalog/profiles/one-profile.yml"].Data = []byte(validProfile(test.profileID, "one"))
-
-			_, err := Load(testSource("one", fsys))
-			if (err != nil) != test.wantError {
-				t.Fatalf("Load() error = %v, want error %t", err, test.wantError)
-			}
-			if err != nil && !strings.Contains(err.Error(), "catalog one: one-profile.yml") {
-				t.Fatalf("Load() error = %v, want catalog source and path context", err)
-			}
-		})
-	}
-}
-
-func TestLoadRejectsCrossCatalogConflicts(t *testing.T) {
-	t.Run("duplicate backend", func(t *testing.T) {
-		second := catalogFS("one", map[string]string{
-			"catalog/profiles/second.yml": validProfile("second", "one"),
-		}, "null")
-		_, err := Load(
-			Source{Name: "first", ExpectedBackendID: "one", FS: validCatalogFS("one"), Root: "catalog"},
-			Source{Name: "second", ExpectedBackendID: "one", FS: second, Root: "catalog"},
-		)
-		if err == nil {
-			t.Fatal("expected duplicate backend error")
+		profile, err := state.GetProfile(context.Background(), id)
+		if err != nil || profile.ResolvedTarget.Model != want {
+			t.Fatalf("profile %s: %+v, %v", id, profile, err)
 		}
-	})
-
-	t.Run("duplicate profile", func(t *testing.T) {
-		first := catalogFS("one", map[string]string{
-			"catalog/profiles/shared.yml": validProfile("shared", "one"),
-		}, "null")
-		second := catalogFS("two", map[string]string{
-			"catalog/profiles/shared.yml": validProfile("shared", "two"),
-		}, "null")
-		_, err := Load(testSource("one", first), testSource("two", second))
-		if err == nil {
-			t.Fatal("expected duplicate profile error")
-		}
-	})
-
-	t.Run("cross-catalog base", func(t *testing.T) {
-		first := catalogFS("one", map[string]string{
-			"catalog/profiles/base.yml": validProfile("base", "one"),
-		}, "null")
-		second := catalogFS("two", map[string]string{
-			"catalog/profiles/child.yml": "id: child\nbase_profile: base\n",
-		}, "null")
-		_, err := Load(testSource("one", first), testSource("two", second))
-		if err == nil {
-			t.Fatal("expected cross-catalog base error")
-		}
-	})
+	}
 }
 
-func TestLoadReturnsDefensiveCatalogValues(t *testing.T) {
-	fsys := catalogFS("one", map[string]string{
-		"catalog/profiles/one-profile.yml": validProfile("one-profile", "one") + "extra_params:\n  nested:\n    value: profile\n",
-	}, `{"nested":{"value":"backend"}}`)
-	loaded, err := Load(testSource("one", fsys))
+func TestConsumerOverlayReplacesCatalogDefaultsBeforeValidation(t *testing.T) {
+	underlays, err := Underlays()
 	if err != nil {
-		t.Fatalf("load catalog: %v", err)
+		t.Fatal(err)
 	}
-	loaded.Backends[0].ExtraParams["nested"].(map[string]any)["value"] = "changed"
-	profileValue, err := loaded.Profiles.GetProfile(context.Background(), "one-profile")
+	underlays = append(underlays, configkit.Underlay{Inputs: []configkit.Input{{Source: configkit.Mapping("operator", map[string]any{
+		"backends": map[string]any{"openrouter": map[string]any{"endpoint": "invalid lower value"}},
+	})}}})
+	main := configkit.Input{Source: configkit.Mapping("application", map[string]any{
+		"backends": map[string]any{"openrouter": map[string]any{"endpoint": "https://alternate.example/v1"}},
+		"profiles": map[string]any{"gemini-flash-latest": map[string]any{"model": "consumer-model"}},
+	})}
+	state, err := configuration.Load(main, underlays)
 	if err != nil {
-		t.Fatalf("load profile: %v", err)
+		t.Fatalf("replaced lower-layer value failed final validation: %v", err)
 	}
-	profileValue.ExtraParams["nested"].(map[string]any)["value"] = "changed"
-
-	again, err := Load(testSource("one", fsys))
-	if err != nil {
-		t.Fatalf("reload catalog: %v", err)
+	profile, err := state.GetProfile(context.Background(), "promptkit-openrouter-standard")
+	if err != nil || profile.ResolvedTarget.Model != "consumer-model" || profile.ResolvedTarget.Endpoint != "https://alternate.example/v1" {
+		t.Fatalf("maintained profile did not observe final configuration: %+v, %v", profile, err)
 	}
-	if got := again.Backends[0].ExtraParams["nested"].(map[string]any)["value"]; got != "backend" {
-		t.Fatalf("backend mutation escaped returned set: %#v", got)
-	}
-	againProfile, err := loaded.Profiles.GetProfile(context.Background(), "one-profile")
-	if err != nil {
-		t.Fatalf("reload profile: %v", err)
-	}
-	if got := againProfile.ExtraParams["nested"].(map[string]any)["value"]; got != "profile" {
-		t.Fatalf("profile mutation escaped returned value: %#v", got)
+	_, err = configuration.Load(configkit.Input{Source: configkit.Mapping("invalid final", map[string]any{
+		"backends": map[string]any{"openrouter": map[string]any{"endpoint": "invalid final value"}},
+	})}, underlays[:2])
+	var loadError *configkit.LoadError
+	if !errors.As(err, &loadError) {
+		t.Fatalf("invalid final backend did not produce a ConfigKit load error: %v", err)
 	}
 }
-
-func testSource(id string, fsys fs.FS) Source {
-	return Source{Name: id, ExpectedBackendID: id, FS: fsys, Root: "catalog"}
-}
-
-func validCatalogFS(id string) fstest.MapFS {
-	return catalogFS(id, map[string]string{
-		"catalog/profiles/" + id + "-profile.yml": validProfile(id+"-profile", id),
-	}, "null")
-}
-
-func catalogFS(id string, profiles map[string]string, extraParams string) fstest.MapFS {
-	fsys := fstest.MapFS{
-		"catalog/backend.json": &fstest.MapFile{Data: []byte(validManifest(id, "TEST_API_KEY", extraParams))},
-	}
-	for name, content := range profiles {
-		fsys[name] = &fstest.MapFile{Data: []byte(content)}
-	}
-	return fsys
-}
-
-func validManifest(id, apiKeyEnv, extraParams string) string {
-	return fmt.Sprintf(
-		`{"schema_version":1,"id":%q,"endpoint":%q,"api_key_env":%q,"concurrency_limit":2,"queue_capacity":3,"extra_params":%s}`,
-		id,
-		"https://"+id+".example/v1",
-		apiKeyEnv,
-		extraParams,
-	)
-}
-
-func validProfile(id, backendID string) string {
-	return fmt.Sprintf("id: %s\nbackend: %s\nmodel: test-model\n", id, backendID)
-}
-
-var _ fs.FS = openrouter.FS()

internal/configuration/benchmark_test.go

@@ -0,0 +1,179 @@
+package configuration
+
+import (
+	"context"
+	"fmt"
+	"testing"
+	"testing/fstest"
+
+	"gitea.maximumdirect.net/eric/ConfigKit"
+	"gitea.maximumdirect.net/eric/promptkit/internal/domain"
+)
+
+const benchmarkDefinitionCount = 128
+
+var (
+	constructionResult *loaded
+	selectedPrompt     *domain.PromptDefinition
+	selectedProfile    *domain.ExecutionProfile
+)
+
+type configurationShape struct {
+	main             configkit.Input
+	underlays        []configkit.Underlay
+	inputEntries     int
+	effectiveEntries int
+	tiers            int
+}
+
+func benchmarkPrompt(profileID string) map[string]any {
+	return map[string]any{
+		"default_profile": profileID,
+		"messages":        []any{map[string]any{"role": "user", "content": "Hello {{.name}}"}},
+		"output":          map[string]any{"format": "text", "validation_mode": "none"},
+	}
+}
+
+func independentDefinitions(count int) configurationShape {
+	profiles := make(map[string]any, count)
+	prompts := make(map[string]any, count)
+	for index := range count {
+		profileID := fmt.Sprintf("profile-%03d", index)
+		promptID := fmt.Sprintf("prompt-%03d", index)
+		profiles[profileID] = map[string]any{"endpoint": "https://example.test/v1", "model": profileID}
+		prompts[promptID] = map[string]any{"1": benchmarkPrompt(profileID)}
+	}
+	return configurationShape{
+		main:             configkit.Input{Source: configkit.Mapping("independent definitions", map[string]any{"profiles": profiles, "prompts": prompts})},
+		inputEntries:     count * 2,
+		effectiveEntries: count * 2,
+		tiers:            1,
+	}
+}
+
+func fileBackedDefinitions(count int) configurationShape {
+	profiles := make(map[string]any, count)
+	prompts := make(map[string]any, count)
+	for index := range count {
+		profileID := fmt.Sprintf("profile-%03d", index)
+		promptID := fmt.Sprintf("prompt-%03d", index)
+		profiles[profileID] = map[string]any{"endpoint": "https://example.test/v1", "model": profileID}
+		prompt := benchmarkPrompt(profileID)
+		prompt["messages"] = []any{map[string]any{"role": "user", "content_file": "body.md"}}
+		prompts[promptID] = map[string]any{"1": prompt}
+	}
+	namespace := configkit.NewFilesystem("benchmark content", fstest.MapFS{
+		"assets/body.md": &fstest.MapFile{Data: []byte("Hello {{.name}}")},
+	})
+	return configurationShape{
+		main: configkit.Input{
+			Source:     configkit.Mapping("file-backed definitions", map[string]any{"profiles": profiles, "prompts": prompts}),
+			Filesystem: &configkit.FilesystemContext{FS: &namespace, Root: ".", BaseDir: "assets"},
+		},
+		inputEntries: count * 2, effectiveEntries: count * 2, tiers: 1,
+	}
+}
+
+func sharedBaseDefinitions(count int) configurationShape {
+	profiles := make(map[string]any, count+1)
+	profiles["base"] = map[string]any{
+		"endpoint": "https://example.test/v1", "model": "shared-model",
+		"extra_params": map[string]any{"provider": map[string]any{"mode": "shared", "limit": 4}},
+	}
+	for index := range count {
+		profiles[fmt.Sprintf("child-%03d", index)] = map[string]any{"extends": "base", "temperature": float64(index%10) / 10}
+	}
+	return configurationShape{
+		main: configkit.Input{Source: configkit.Mapping("inherited definitions", map[string]any{
+			"profiles": profiles,
+			"prompts":  map[string]any{"shared": map[string]any{"1": benchmarkPrompt(fmt.Sprintf("child-%03d", count-1))}},
+		})},
+		inputEntries:     count + 2,
+		effectiveEntries: count + 2,
+		tiers:            1,
+	}
+}
+
+func layeredDefinitions(count int) configurationShape {
+	base := make(map[string]any, count)
+	operator := make(map[string]any, count)
+	programmatic := make(map[string]any, count)
+	final := make(map[string]any, count)
+	for index := range count {
+		id := fmt.Sprintf("profile-%03d", index)
+		base[id] = map[string]any{"endpoint": "https://example.test/v1", "model": "base-model"}
+		operator[id] = map[string]any{"model": "operator-model"}
+		programmatic[id] = map[string]any{"extra_params": map[string]any{"provider": map[string]any{"mode": "programmatic"}}}
+		final[id] = map[string]any{"temperature": float64(index%10) / 10}
+	}
+	return configurationShape{
+		underlays: []configkit.Underlay{
+			{Inputs: []configkit.Input{{Source: configkit.Mapping("fallback", map[string]any{"profiles": base})}}},
+			{Inputs: []configkit.Input{{Source: configkit.Mapping("operator", map[string]any{"profiles": operator})}}},
+			{Inputs: []configkit.Input{{Source: configkit.Mapping("programmatic", map[string]any{"profiles": programmatic})}}},
+		},
+		main: configkit.Input{Source: configkit.Mapping("main", map[string]any{
+			"profiles": final,
+			"prompts":  map[string]any{"layered": map[string]any{"1": benchmarkPrompt(fmt.Sprintf("profile-%03d", count-1))}},
+		})},
+		inputEntries:     count*4 + 1,
+		effectiveEntries: count + 1,
+		tiers:            4,
+	}
+}
+
+func BenchmarkConfigurationConstruction(b *testing.B) {
+	for _, scenario := range []struct {
+		name  string
+		shape configurationShape
+	}{
+		{name: "independent", shape: independentDefinitions(benchmarkDefinitionCount)},
+		{name: "file_backed", shape: fileBackedDefinitions(64)},
+		{name: "shared_base", shape: sharedBaseDefinitions(benchmarkDefinitionCount)},
+		{name: "layered", shape: layeredDefinitions(benchmarkDefinitionCount)},
+	} {
+		b.Run(scenario.name, func(b *testing.B) {
+			b.ReportAllocs()
+			for b.Loop() {
+				result, err := load(scenario.shape.main, scenario.shape.underlays)
+				if err != nil {
+					b.Fatal(err)
+				}
+				constructionResult = result
+			}
+			b.ReportMetric(float64(scenario.shape.inputEntries), "input-entries/op")
+			b.ReportMetric(float64(scenario.shape.effectiveEntries), "effective-entries/op")
+			b.ReportMetric(float64(scenario.shape.tiers), "tiers/op")
+		})
+	}
+}
+
+func BenchmarkConfigurationSelection(b *testing.B) {
+	shape := independentDefinitions(benchmarkDefinitionCount)
+	result, err := load(shape.main, nil)
+	if err != nil {
+		b.Fatal(err)
+	}
+	b.Run("prompt", func(b *testing.B) {
+		b.ReportAllocs()
+		for b.Loop() {
+			definition, _, err := result.prompt("prompt-127", "1")
+			if err != nil {
+				b.Fatal(err)
+			}
+			selectedPrompt = definition
+		}
+		b.ReportMetric(float64(shape.effectiveEntries), "effective-entries/op")
+	})
+	b.Run("profile", func(b *testing.B) {
+		b.ReportAllocs()
+		for b.Loop() {
+			profile, err := result.GetProfile(context.Background(), "profile-127")
+			if err != nil {
+				b.Fatal(err)
+			}
+			selectedProfile = profile
+		}
+		b.ReportMetric(float64(shape.effectiveEntries), "effective-entries/op")
+	})
+}

internal/configuration/inspection.go

@@ -0,0 +1,45 @@
+package configuration
+
+import (
+	"io"
+	"strings"
+
+	"gitea.maximumdirect.net/eric/ConfigKit"
+)
+
+// Inspection is the read-only subset of the retained ConfigKit result used by
+// the facade. It does not expose typed configuration or resource contexts.
+type Inspection interface {
+	Metadata() configkit.Metadata
+	Sources() []configkit.SourceInfo
+	Diagnostics() []configkit.Diagnostic
+	Explain(configkit.Path) (configkit.Explanation, bool)
+	WriteEffective(io.Writer) error
+	WriteExplanation(io.Writer, configkit.Path) error
+}
+
+// Inspection returns only the retained result's inspection operations.
+func (state *loaded) Inspection() Inspection {
+	if state == nil {
+		return nil
+	}
+	return state.result
+}
+
+func secretProviderPath(path configkit.Path) bool {
+	pointer := path.String()
+	if pointer == "" {
+		return false
+	}
+	parts := strings.Split(strings.TrimPrefix(pointer, "/"), "/")
+	if len(parts) < 4 || (parts[0] != "backends" && parts[0] != "profiles") || parts[2] != "extra_params" {
+		return false
+	}
+	key := strings.ToLower(strings.ReplaceAll(strings.ReplaceAll(parts[len(parts)-1], "~1", "/"), "~0", "~"))
+	switch key {
+	case "api_key", "apikey", "authorization", "credential", "credentials", "password", "secret", "token", "access_token":
+		return true
+	default:
+		return false
+	}
+}

internal/configuration/load.go

@@ -0,0 +1,317 @@
+// Package configuration adapts ConfigKit's effective configuration to
+// Promptkit's definition and execution boundaries.
+package configuration
+
+import (
+	"fmt"
+	"regexp"
+	"sort"
+	"strings"
+
+	"gitea.maximumdirect.net/eric/ConfigKit"
+	"gitea.maximumdirect.net/eric/promptkit/internal/backend"
+	"gitea.maximumdirect.net/eric/promptkit/internal/domain"
+	"gitea.maximumdirect.net/eric/promptkit/internal/jsonvalue"
+	"gitea.maximumdirect.net/eric/promptkit/internal/llm"
+)
+
+type document struct {
+	Backends map[string]backendConfig           `yaml:"backends"`
+	Profiles map[string]profileConfig           `yaml:"profiles"`
+	Prompts  map[string]map[string]promptConfig `yaml:"prompts"`
+}
+
+type backendConfig struct {
+	Endpoint         *string        `yaml:"endpoint"`
+	APIKeyEnv        *string        `yaml:"api_key_env"`
+	ConcurrencyLimit *int           `yaml:"concurrency_limit"`
+	QueueCapacity    *int           `yaml:"queue_capacity"`
+	ExtraParams      map[string]any `yaml:"extra_params"`
+}
+
+type profileConfig struct {
+	Backend         *string        `yaml:"backend"`
+	Endpoint        *string        `yaml:"endpoint"`
+	Model           *string        `yaml:"model"`
+	Temperature     *float64       `yaml:"temperature"`
+	TopP            *float64       `yaml:"top_p"`
+	MaxTokens       *int           `yaml:"max_tokens"`
+	TimeoutSeconds  *int           `yaml:"timeout_seconds"`
+	ServiceTier     *string        `yaml:"service_tier"`
+	ReasoningEffort *string        `yaml:"reasoning_effort"`
+	APIKeyEnv       *string        `yaml:"api_key_env"`
+	APIKeyRequired  *bool          `yaml:"api_key_required"`
+	ExtraParams     map[string]any `yaml:"extra_params"`
+}
+
+type promptConfig struct {
+	DefaultProfile *string               `yaml:"default_profile"`
+	Description    *string               `yaml:"description"`
+	SessionID      *string               `yaml:"session_id"`
+	Inputs         []promptInputConfig   `yaml:"inputs"`
+	Messages       []promptMessageConfig `yaml:"messages"`
+	Output         *promptOutputConfig   `yaml:"output"`
+}
+
+type promptInputConfig struct {
+	Name        string `yaml:"name"`
+	Required    bool   `yaml:"required"`
+	ContentType string `yaml:"content_type"`
+	Description string `yaml:"description"`
+}
+
+type promptMessageConfig struct {
+	Role         *string             `yaml:"role"`
+	Content      *string             `yaml:"content"`
+	ContentFile  *string             `yaml:"content_file"`
+	CacheControl *cacheControlConfig `yaml:"cache_control"`
+}
+
+type cacheControlConfig struct {
+	Type *string `yaml:"type"`
+	TTL  *string `yaml:"ttl"`
+}
+
+type promptOutputConfig struct {
+	Format         *string `yaml:"format"`
+	ValidationMode *string `yaml:"validation_mode"`
+	SchemaPath     *string `yaml:"schema_path"`
+	RepairAttempts int     `yaml:"repair_attempts"`
+}
+
+// fieldState distinguishes omission, an explicit value, and an explicit null.
+// Inherited values are explicit because ConfigKit has already expanded them.
+type fieldState uint8
+
+const (
+	fieldAbsent fieldState = iota
+	fieldValue
+	fieldNull
+)
+
+type loaded struct {
+	result          *configkit.Result[document]
+	backends        map[string]map[string]fieldState
+	profiles        map[string]map[string]fieldState
+	prompts         map[string]map[string]*promptEntry
+	ambiguous       map[string]bool
+	registry        *backend.Registry
+	indexedProfiles map[string]domain.ExecutionProfile
+}
+
+var envName = regexp.MustCompile(`^[A-Za-z_][A-Za-z0-9_]*$`)
+
+var backendFields = []string{"endpoint", "api_key_env", "concurrency_limit", "queue_capacity", "extra_params"}
+var profileFields = []string{"backend", "endpoint", "model", "temperature", "top_p", "max_tokens", "timeout_seconds", "service_tier", "reasoning_effort", "api_key_env", "api_key_required", "extra_params"}
+
+// Load captures one immutable effective configuration for internal consumers.
+func Load(main configkit.Input, underlays []configkit.Underlay) (*loaded, error) {
+	return load(main, underlays)
+}
+
+// load performs one ConfigKit lifecycle over the selected source tiers.
+func load(main configkit.Input, underlays []configkit.Underlay) (*loaded, error) {
+	state := &loaded{
+		backends: make(map[string]map[string]fieldState),
+		profiles: make(map[string]map[string]fieldState),
+	}
+	result, err := configkit.LoadLayered(main, configkit.LayeredOptions[document]{
+		Underlays: underlays,
+		Definition: configkit.Definition[document]{
+			Secret: secretProviderPath,
+			Resolve: func(config *document, resolution *configkit.Resolution) error {
+				captureFields(config.Backends, "backends", backendFields, resolution, state.backends)
+				captureFields(config.Profiles, "profiles", profileFields, resolution, state.profiles)
+				resolveBackends(config.Backends, resolution)
+				resolveProfiles(config.Profiles, resolution)
+				resolvePrompts(config.Prompts, resolution)
+				return nil
+			},
+			Validate: validateEffective,
+		},
+	})
+	if err != nil {
+		return nil, fmt.Errorf("load configuration: %w", err)
+	}
+	state.result = result
+	if err := state.materializePrompts(); err != nil {
+		return nil, fmt.Errorf("load configuration: %w", err)
+	}
+	if err := state.buildExecutionProfiles(); err != nil {
+		return nil, fmt.Errorf("load configuration: %w", err)
+	}
+	return state, nil
+}
+
+func captureFields[T any](entries map[string]T, collection string, fields []string, resolution *configkit.Resolution, destination map[string]map[string]fieldState) {
+	for id := range entries {
+		states := make(map[string]fieldState, len(fields))
+		for _, field := range fields {
+			info, exists := resolution.InputInfo(configkit.Keys(collection, id, field))
+			switch {
+			case !exists || !info.Explicit:
+				states[field] = fieldAbsent
+			case info.Null:
+				states[field] = fieldNull
+			default:
+				states[field] = fieldValue
+			}
+		}
+		destination[id] = states
+	}
+}
+
+func sortedKeys[T any](entries map[string]T) []string {
+	keys := make([]string, 0, len(entries))
+	for key := range entries {
+		keys = append(keys, key)
+	}
+	sort.Strings(keys)
+	return keys
+}
+
+func normalizeString(value **string, path configkit.Path, resolution *configkit.Resolution, normalized string) bool {
+	if value != nil && *value != nil && **value != normalized {
+		configkit.Normalize(resolution, path, value, &normalized, "normalize configuration value")
+		return true
+	}
+	return false
+}
+
+func resolveBackends(backends map[string]backendConfig, resolution *configkit.Resolution) {
+	for _, id := range sortedKeys(backends) {
+		backend := backends[id]
+		base := configkit.Keys("backends", id)
+		if backend.Endpoint != nil {
+			endpoint, err := domain.NormalizeOpenAICompatibleBaseEndpoint(*backend.Endpoint)
+			if err != nil {
+				resolution.Error(base.Key("endpoint"), err.Error())
+			} else {
+				normalizeString(&backend.Endpoint, base.Key("endpoint"), resolution, endpoint)
+			}
+		}
+		if backend.APIKeyEnv != nil {
+			normalizeString(&backend.APIKeyEnv, base.Key("api_key_env"), resolution, strings.TrimSpace(*backend.APIKeyEnv))
+		}
+		if backend.ConcurrencyLimit != nil && *backend.ConcurrencyLimit > 0 && backend.QueueCapacity == nil {
+			capacity := 1024
+			if resolution.IsExplicit(base.Key("queue_capacity")) {
+				configkit.Normalize(resolution, base.Key("queue_capacity"), &backend.QueueCapacity, &capacity, "select default queue capacity")
+			} else {
+				configkit.Default(resolution, base.Key("queue_capacity"), &backend.QueueCapacity, &capacity, "select default queue capacity")
+			}
+		}
+		backends[id] = backend
+	}
+}
+
+func resolveProfiles(profiles map[string]profileConfig, resolution *configkit.Resolution) {
+	for _, id := range sortedKeys(profiles) {
+		profile := profiles[id]
+		base := configkit.Keys("profiles", id)
+		if profile.Endpoint != nil && *profile.Endpoint != "" {
+			endpoint, err := domain.NormalizeOpenAICompatibleBaseEndpoint(*profile.Endpoint)
+			if err != nil {
+				resolution.Error(base.Key("endpoint"), err.Error())
+			} else {
+				normalizeString(&profile.Endpoint, base.Key("endpoint"), resolution, endpoint)
+			}
+		}
+		for _, field := range []struct {
+			name  string
+			value **string
+		}{
+			{"service_tier", &profile.ServiceTier},
+			{"reasoning_effort", &profile.ReasoningEffort},
+			{"api_key_env", &profile.APIKeyEnv},
+		} {
+			if *field.value != nil {
+				normalizeString(field.value, base.Key(field.name), resolution, strings.TrimSpace(**field.value))
+			}
+		}
+		profiles[id] = profile
+	}
+}
+
+func validateEffective(config *document, validation *configkit.Validation) {
+	for _, id := range sortedKeys(config.Backends) {
+		backend := config.Backends[id]
+		base := configkit.Keys("backends", id)
+		if strings.TrimSpace(id) == "" {
+			validation.Error(base, "backend ID must not be blank")
+		}
+		if backend.Endpoint == nil || *backend.Endpoint == "" {
+			validation.Error(base.Key("endpoint"), "endpoint is required")
+		}
+		if backend.APIKeyEnv != nil && *backend.APIKeyEnv != "" && !envName.MatchString(*backend.APIKeyEnv) {
+			validation.Error(base.Key("api_key_env"), "environment variable name is invalid")
+		}
+		if backend.ConcurrencyLimit != nil && *backend.ConcurrencyLimit < 0 {
+			validation.Error(base.Key("concurrency_limit"), "concurrency limit must not be negative")
+		}
+		if backend.QueueCapacity != nil {
+			if *backend.QueueCapacity < 0 {
+				validation.Error(base.Key("queue_capacity"), "queue capacity must not be negative")
+			}
+			if backend.ConcurrencyLimit == nil || *backend.ConcurrencyLimit <= 0 {
+				validation.Error(base.Key("queue_capacity"), "queue capacity requires a positive concurrency limit")
+			} else if *backend.QueueCapacity > int(^uint(0)>>1)-*backend.ConcurrencyLimit {
+				validation.Error(base.Key("queue_capacity"), "total capacity overflows int")
+			}
+		}
+		validateExtraParams(backend.ExtraParams, base.Key("extra_params"), true, validation)
+	}
+	for _, id := range sortedKeys(config.Profiles) {
+		profile := config.Profiles[id]
+		base := configkit.Keys("profiles", id)
+		if strings.TrimSpace(id) == "" {
+			validation.Error(base, "profile ID must not be blank")
+		}
+		if profile.Backend != nil && *profile.Backend != "" {
+			if _, exists := config.Backends[*profile.Backend]; !exists {
+				validation.Error(base.Key("backend"), "backend is not defined")
+			}
+		}
+		if profile.Model != nil && *profile.Model != "" && strings.TrimSpace(*profile.Model) == "" {
+			validation.Error(base.Key("model"), "model must not be blank")
+		}
+		if profile.Temperature != nil {
+			if err := domain.ValidateExecutionTargetSettings(domain.ExecutionTarget{Temperature: *profile.Temperature}); err != nil {
+				validation.Error(base.Key("temperature"), err.Error())
+			}
+		}
+		if profile.TopP != nil {
+			if err := domain.ValidateExecutionTargetSettings(domain.ExecutionTarget{TopP: *profile.TopP}); err != nil {
+				validation.Error(base.Key("top_p"), err.Error())
+			}
+		}
+		if profile.MaxTokens != nil {
+			if err := domain.ValidateExecutionTargetSettings(domain.ExecutionTarget{MaxTokens: *profile.MaxTokens}); err != nil {
+				validation.Error(base.Key("max_tokens"), err.Error())
+			}
+		}
+		if profile.TimeoutSeconds != nil {
+			if err := domain.ValidateExecutionTargetSettings(domain.ExecutionTarget{TimeoutSeconds: *profile.TimeoutSeconds}); err != nil {
+				validation.Error(base.Key("timeout_seconds"), err.Error())
+			}
+		}
+		validateExtraParams(profile.ExtraParams, base.Key("extra_params"), false, validation)
+	}
+}
+
+func validateExtraParams(values map[string]any, path configkit.Path, backend bool, validation *configkit.Validation) {
+	if values == nil {
+		return
+	}
+	if _, err := jsonvalue.CopyMap(values); err != nil {
+		validation.Error(path, "extra parameters must be a JSON-compatible map with nonempty keys")
+		return
+	}
+	if backend {
+		for key := range values {
+			if llm.IsReservedOpenAIChatRequestField(key) {
+				validation.Error(path.Key(key), "extra parameter conflicts with a request field")
+			}
+		}
+	}
+}

internal/configuration/load_test.go

@@ -0,0 +1,138 @@
+package configuration
+
+import (
+	"errors"
+	"testing"
+
+	"gitea.maximumdirect.net/eric/ConfigKit"
+)
+
+func mapping(label string, values map[string]any) configkit.Input {
+	return configkit.Input{Source: configkit.Mapping(label, values)}
+}
+
+func TestLoadComposesLiteralKeysAndEffectivePresence(t *testing.T) {
+	base := mapping("defaults", map[string]any{
+		"backends": map[string]any{
+			"local.v1": map[string]any{"endpoint": "http://localhost:8080/v1", "concurrency_limit": 2},
+		},
+		"profiles": map[string]any{
+			"base/one": map[string]any{"backend": "local.v1", "temperature": 0.8, "top_p": 0.9, "api_key_required": true,
+				"extra_params": map[string]any{"provider": map[string]any{"first": 1, "second": 2}}},
+			"child.v1": map[string]any{"extends": "base/one"},
+		},
+		"prompts": map[string]any{"invoice/summary": map[string]any{"v1.0": map[string]any{
+			"messages": []any{map[string]any{"role": "user", "content": "Summarize."}},
+			"output":   map[string]any{"format": "text", "validation_mode": "basic"},
+		}}},
+	})
+	overlay := mapping("operator", map[string]any{
+		"backends": map[string]any{"local.v1": map[string]any{"queue_capacity": 0}},
+		"profiles": map[string]any{"child.v1": map[string]any{
+			"temperature": 0, "top_p": nil, "api_key_required": false,
+			"extra_params": map[string]any{"provider": map[string]any{"second": 3}},
+		}},
+	})
+	loaded, err := load(configkit.Input{Source: configkit.NoSource()}, []configkit.Underlay{
+		{Inputs: []configkit.Input{base}}, {Inputs: []configkit.Input{overlay}},
+	})
+	if err != nil {
+		t.Fatal(err)
+	}
+	profile := loaded.result.Config.Profiles["child.v1"]
+	if profile.Temperature == nil || *profile.Temperature != 0 || profile.TopP != nil || profile.APIKeyRequired == nil || *profile.APIKeyRequired {
+		t.Fatalf("effective values were not retained: %+v", profile)
+	}
+	if loaded.profiles["child.v1"]["temperature"] != fieldValue || loaded.profiles["child.v1"]["top_p"] != fieldNull || loaded.profiles["child.v1"]["api_key_required"] != fieldValue {
+		t.Fatalf("effective presence was lost: %+v", loaded.profiles["child.v1"])
+	}
+	provider := profile.ExtraParams["provider"].(map[string]any)
+	if provider["first"] != int64(1) || provider["second"] != int64(3) {
+		t.Fatalf("recursive overlay failed: %+v", provider)
+	}
+	backend := loaded.result.Config.Backends["local.v1"]
+	if backend.QueueCapacity == nil || *backend.QueueCapacity != 0 || loaded.backends["local.v1"]["queue_capacity"] != fieldValue {
+		t.Fatalf("explicit zero queue capacity was lost: %+v", backend)
+	}
+	if loaded.result.Config.Prompts["invoice/summary"]["v1.0"].Messages[0].Content == nil {
+		t.Fatal("literal prompt ID and version were not decoded")
+	}
+}
+
+func TestLoadRecordsBackendNormalizationAndNullDefault(t *testing.T) {
+	loaded, err := load(mapping("backend", map[string]any{"backends": map[string]any{
+		"local": map[string]any{"endpoint": " HTTP://localhost:8080/v1 ", "api_key_env": " TOKEN_NAME ",
+			"concurrency_limit": 2, "queue_capacity": nil},
+	}}), nil)
+	if err != nil {
+		t.Fatal(err)
+	}
+	backend := loaded.result.Config.Backends["local"]
+	if backend.Endpoint == nil || *backend.Endpoint != "http://localhost:8080/v1" ||
+		backend.APIKeyEnv == nil || *backend.APIKeyEnv != "TOKEN_NAME" ||
+		backend.QueueCapacity == nil || *backend.QueueCapacity != 1024 {
+		t.Fatalf("backend normalization/default was not applied: %+v", backend)
+	}
+	if loaded.backends["local"]["queue_capacity"] != fieldNull {
+		t.Fatalf("explicit null was not retained: %+v", loaded.backends["local"])
+	}
+}
+
+func TestLoadDefaultsAbsentQueueCapacity(t *testing.T) {
+	loaded, err := load(mapping("backend", map[string]any{"backends": map[string]any{
+		"local": map[string]any{"endpoint": "http://localhost:8080/v1", "concurrency_limit": 1},
+	}}), nil)
+	if err != nil {
+		t.Fatal(err)
+	}
+	backend := loaded.result.Config.Backends["local"]
+	if backend.QueueCapacity == nil || *backend.QueueCapacity != 1024 || loaded.backends["local"]["queue_capacity"] != fieldAbsent {
+		t.Fatalf("absent queue capacity did not receive its default: %+v", backend)
+	}
+}
+
+func TestLoadRejectsStrictGroupConflict(t *testing.T) {
+	_, err := load(configkit.Input{Source: configkit.NoSource()}, []configkit.Underlay{{Inputs: []configkit.Input{
+		mapping("first", map[string]any{"profiles": map[string]any{"shared": map[string]any{"model": "one"}}}),
+		mapping("second", map[string]any{"profiles": map[string]any{"shared": map[string]any{"model": "one"}}}),
+	}}})
+	var loadError *configkit.LoadError
+	if !errors.As(err, &loadError) {
+		t.Fatalf("expected ConfigKit load error, got %v", err)
+	}
+}
+
+func TestLoadValidatesOnlyFinalDomainValues(t *testing.T) {
+	underlay := mapping("defaults", map[string]any{
+		"backends": map[string]any{"local": map[string]any{"endpoint": "not a URL"}},
+		"profiles": map[string]any{"partial": map[string]any{"backend": "local"}},
+	})
+	main := mapping("operator", map[string]any{"backends": map[string]any{"local": map[string]any{"endpoint": "http://localhost:8080/v1"}}})
+	loaded, err := load(main, []configkit.Underlay{{Inputs: []configkit.Input{underlay}}})
+	if err != nil {
+		t.Fatalf("replaced lower-layer domain value should not fail: %v", err)
+	}
+	if loaded.result.Config.Profiles["partial"].Model != nil {
+		t.Fatal("unused partial profile unexpectedly gained a model")
+	}
+
+	_, err = load(configkit.Input{Source: configkit.NoSource()}, []configkit.Underlay{{Inputs: []configkit.Input{
+		mapping("invalid", map[string]any{"backends": map[string]any{"unused": map[string]any{"endpoint": "not a URL"}}}),
+	}}})
+	var loadError *configkit.LoadError
+	if !errors.As(err, &loadError) {
+		t.Fatalf("expected path-aware effective backend failure, got %v", err)
+	}
+	if diagnostics := loadError.Diagnostics(); len(diagnostics) != 1 || diagnostics[0].Path.String() != "/backends/unused/endpoint" {
+		t.Fatalf("expected endpoint diagnostic, got %+v", diagnostics)
+	}
+}
+
+func TestLoadKeepsSyntaxErrorsFromLowerTiers(t *testing.T) {
+	_, err := load(mapping("operator", map[string]any{"backends": map[string]any{"local": map[string]any{"endpoint": "http://localhost:8080"}}}),
+		[]configkit.Underlay{{Inputs: []configkit.Input{{Source: configkit.Bytes("broken", []byte("backends: ["))}}}})
+	var loadError *configkit.LoadError
+	if !errors.As(err, &loadError) {
+		t.Fatalf("expected lower-tier parsing error, got %v", err)
+	}
+}

internal/configuration/prompts.go

@@ -0,0 +1,331 @@
+package configuration
+
+import (
+	"context"
+	"errors"
+	"fmt"
+	"io"
+	"strings"
+	"text/template"
+
+	"gitea.maximumdirect.net/eric/ConfigKit"
+	"gitea.maximumdirect.net/eric/promptkit/internal/domain"
+	"gitea.maximumdirect.net/eric/promptkit/internal/filecatalog"
+	"gitea.maximumdirect.net/eric/promptkit/internal/prompt"
+	"gitea.maximumdirect.net/eric/promptkit/internal/promptdef"
+)
+
+var (
+	errPromptNotFound  = errors.New("prompt definition not found")
+	errPromptAmbiguous = errors.New("prompt version is ambiguous")
+)
+
+type promptEntry struct {
+	definition domain.PromptDefinition
+	inspection domain.PromptInspection
+	hash       string
+	session    *template.Template
+	messages   []*template.Template
+}
+
+func resolvePrompts(prompts map[string]map[string]promptConfig, resolution *configkit.Resolution) {
+	for _, id := range sortedKeys(prompts) {
+		for _, version := range sortedKeys(prompts[id]) {
+			definition := prompts[id][version]
+			base := configkit.Keys("prompts", id, version)
+			for _, field := range []struct {
+				name  string
+				value **string
+			}{
+				{"description", &definition.Description},
+				{"session_id", &definition.SessionID},
+			} {
+				if *field.value != nil {
+					normalizeString(field.value, base.Key(field.name), resolution, strings.TrimSpace(**field.value))
+				}
+			}
+			inputsChanged := false
+			for index := range definition.Inputs {
+				input := &definition.Inputs[index]
+				inputPath := base.Key("inputs").Index(index)
+				for _, field := range []struct {
+					name  string
+					value *string
+				}{
+					{"name", &input.Name},
+					{"content_type", &input.ContentType},
+					{"description", &input.Description},
+				} {
+					normalized := strings.TrimSpace(*field.value)
+					if normalized != *field.value {
+						configkit.Normalize(resolution, inputPath.Key(field.name), field.value, normalized, "normalize input metadata")
+						inputsChanged = true
+					}
+				}
+			}
+			if inputsChanged {
+				resolution.Record(base.Key("inputs"), configkit.ChangeNormalization, "normalize input metadata")
+			}
+			// Normalize message metadata on execution-owned copies below. ConfigKit
+			// records sequence mutations as whole-value replacements, which would
+			// discard the effective source contexts of unchanged content_file fields.
+			if definition.Output != nil && definition.Output.SchemaPath != nil {
+				normalizeString(&definition.Output.SchemaPath, base.Key("output").Key("schema_path"), resolution, strings.TrimSpace(*definition.Output.SchemaPath))
+			}
+			prompts[id][version] = definition
+		}
+	}
+}
+
+func (state *loaded) materializePrompts() error {
+	state.prompts = make(map[string]map[string]*promptEntry, len(state.result.Config.Prompts))
+	state.ambiguous = make(map[string]bool)
+	var metadata *configkit.Metadata
+	lookupOrigin := func(path configkit.Path) (configkit.FieldInfo, bool) {
+		if metadata == nil {
+			captured := state.result.Metadata()
+			metadata = &captured
+		}
+		return metadata.Lookup(path)
+	}
+	for _, id := range sortedKeys(state.result.Config.Prompts) {
+		if strings.TrimSpace(id) == "" {
+			return fmt.Errorf("%s: prompt ID must not be blank", configkit.Keys("prompts", id))
+		}
+		versions := state.result.Config.Prompts[id]
+		if versions == nil {
+			return fmt.Errorf("%s: prompt collection must be a mapping", configkit.Keys("prompts", id))
+		}
+		state.prompts[id] = make(map[string]*promptEntry, len(versions))
+		state.ambiguous[id] = len(versions) > 1
+		for _, version := range sortedKeys(versions) {
+			if strings.TrimSpace(version) == "" {
+				return fmt.Errorf("%s: prompt version must not be blank", configkit.Keys("prompts", id, version))
+			}
+			entry, err := state.materializePrompt(id, version, versions[version], lookupOrigin)
+			if err != nil {
+				return err
+			}
+			state.prompts[id][version] = entry
+		}
+	}
+	return nil
+}
+
+func (state *loaded) materializePrompt(id, version string, raw promptConfig, lookupOrigin func(configkit.Path) (configkit.FieldInfo, bool)) (*promptEntry, error) {
+	base := configkit.Keys("prompts", id, version)
+	if len(raw.Messages) == 0 {
+		return nil, fmt.Errorf("%s: at least one message is required", base.Key("messages"))
+	}
+	definition := domain.PromptDefinition{ID: id, Version: version}
+	if raw.DefaultProfile != nil {
+		if strings.TrimSpace(*raw.DefaultProfile) == "" {
+			return nil, fmt.Errorf("%s: default profile must not be blank", base.Key("default_profile"))
+		}
+		definition.DefaultProfile = *raw.DefaultProfile
+	}
+	if raw.Description != nil {
+		definition.Description = *raw.Description
+	}
+	if raw.SessionID != nil {
+		definition.SessionID = *raw.SessionID
+	}
+	seenInputs := make(map[string]bool, len(raw.Inputs))
+	definition.Inputs = make([]domain.PromptInput, 0, len(raw.Inputs))
+	for index, input := range raw.Inputs {
+		path := base.Key("inputs").Index(index)
+		if input.Name == "" {
+			return nil, fmt.Errorf("%s: input name is required", path.Key("name"))
+		}
+		if seenInputs[input.Name] {
+			return nil, fmt.Errorf("%s: input name is duplicated", path.Key("name"))
+		}
+		seenInputs[input.Name] = true
+		definition.Inputs = append(definition.Inputs, domain.PromptInput{
+			Name: input.Name, Required: input.Required, ContentType: input.ContentType, Description: input.Description,
+		})
+	}
+	entry := &promptEntry{messages: make([]*template.Template, 0, len(raw.Messages))}
+	definition.Templates = make([]domain.PromptMessageTemplate, 0, len(raw.Messages))
+	for index, message := range raw.Messages {
+		path := base.Key("messages").Index(index)
+		if message.Role == nil {
+			return nil, fmt.Errorf("%s: role is required", path.Key("role"))
+		}
+		role, err := domain.NormalizeMessageRole(*message.Role)
+		if err != nil {
+			return nil, fmt.Errorf("%s: %w", path.Key("role"), err)
+		}
+		if (message.Content != nil) == (message.ContentFile != nil) {
+			return nil, fmt.Errorf("%s: exactly one of content or content_file is required", path)
+		}
+		content := ""
+		if message.Content != nil {
+			content = *message.Content
+		} else {
+			var err error
+			content, err = state.readContent(path.Key("content_file"), *message.ContentFile, lookupOrigin)
+			if err != nil {
+				return nil, err
+			}
+		}
+		var control *domain.CacheControl
+		if message.CacheControl != nil {
+			if message.CacheControl.Type == nil {
+				return nil, fmt.Errorf("%s: type is required", path.Key("cache_control").Key("type"))
+			}
+			control = &domain.CacheControl{Type: domain.CacheControlType(*message.CacheControl.Type)}
+			if message.CacheControl.TTL != nil {
+				control.TTL = *message.CacheControl.TTL
+			}
+			var err error
+			control, err = domain.NormalizeCacheControl(control)
+			if err != nil {
+				return nil, fmt.Errorf("%s: %w", path.Key("cache_control"), err)
+			}
+		}
+		compiled, err := prompt.CompileTemplate(fmt.Sprintf("msg_%d", index), content)
+		if err != nil {
+			return nil, fmt.Errorf("%s: invalid template syntax: %w", path, err)
+		}
+		entry.messages = append(entry.messages, compiled)
+		definition.Templates = append(definition.Templates, domain.PromptMessageTemplate{
+			Role: role, Content: content, CacheControl: control,
+		})
+	}
+	if raw.Output == nil {
+		return nil, fmt.Errorf("%s: output is required", base.Key("output"))
+	}
+	if raw.Output.Format == nil || raw.Output.ValidationMode == nil {
+		return nil, fmt.Errorf("%s: format and validation_mode are required", base.Key("output"))
+	}
+	contract := domain.OutputContract{
+		Format:         domain.OutputFormat(*raw.Output.Format),
+		ValidationMode: domain.ValidationMode(*raw.Output.ValidationMode),
+		RepairAttempts: raw.Output.RepairAttempts,
+	}
+	if raw.Output.SchemaPath != nil {
+		contract.SchemaPath = *raw.Output.SchemaPath
+	}
+	if err := domain.ValidateOutputContract(contract); err != nil {
+		return nil, fmt.Errorf("%s: invalid output contract: %w", base.Key("output"), err)
+	}
+	definition.OutputFormat = contract.Format
+	definition.Validation = contract
+	if raw.SessionID != nil {
+		var err error
+		entry.session, err = prompt.CompileTemplate("session_id", definition.SessionID)
+		if err != nil {
+			return nil, fmt.Errorf("%s: invalid template syntax: %w", base.Key("session_id"), err)
+		}
+	}
+	hash, err := promptdef.HashDefinition(&definition)
+	if err != nil {
+		return nil, fmt.Errorf("%s: hash prompt definition: %w", base, err)
+	}
+	entry.definition = definition
+	entry.hash = hash
+	entry.inspection = domain.PromptInspection{
+		PromptID: id, PromptVersion: version, PromptHash: hash,
+		DefaultProfileID: definition.DefaultProfile, Inputs: append([]domain.PromptInput(nil), definition.Inputs...),
+		OutputContract: contract,
+	}
+	return entry, nil
+}
+
+func (state *loaded) readContent(fieldPath configkit.Path, name string, lookupOrigin func(configkit.Path) (configkit.FieldInfo, bool)) (string, error) {
+	if strings.TrimSpace(name) == "" {
+		return "", fmt.Errorf("%s: content_file path must not be blank", fieldPath)
+	}
+	field, found := lookupOrigin(fieldPath)
+	if !found || len(field.Origin.Locations) != 1 {
+		return "", fmt.Errorf("%s: content_file needs one contributing source with a filesystem context", fieldPath)
+	}
+	sourceID := field.Origin.Locations[0].SourceID
+	context, found := state.result.SourceContext(sourceID)
+	if !found || context.FS == nil {
+		return "", fmt.Errorf("%s: content_file source %s has no filesystem context", fieldPath, sourceID)
+	}
+	resolved, _, err := filecatalog.ResolveFSPath(".", context.BaseDir, name)
+	if err != nil {
+		return "", fmt.Errorf("%s: content_file path is outside its source root or invalid: %w", fieldPath, err)
+	}
+	file, err := context.FS.Open(resolved)
+	if err != nil {
+		return "", fmt.Errorf("%s: open content_file from source %s: %w", fieldPath, sourceID, err)
+	}
+	content, readErr := io.ReadAll(file)
+	closeErr := file.Close()
+	if readErr != nil {
+		return "", fmt.Errorf("%s: read content_file from source %s: %w", fieldPath, sourceID, readErr)
+	}
+	if closeErr != nil {
+		return "", fmt.Errorf("%s: close content_file from source %s: %w", fieldPath, sourceID, closeErr)
+	}
+	return string(content), nil
+}
+
+func (state *loaded) prompt(id, version string) (*domain.PromptDefinition, domain.PromptInspection, error) {
+	if state == nil || strings.TrimSpace(id) == "" || (version != "" && strings.TrimSpace(version) == "") {
+		return nil, domain.PromptInspection{}, errPromptNotFound
+	}
+	versions := state.prompts[id]
+	if version == "" {
+		if state.ambiguous[id] {
+			return nil, domain.PromptInspection{}, errPromptAmbiguous
+		}
+		for selected := range versions {
+			version = selected
+		}
+	}
+	entry := versions[version]
+	if entry == nil {
+		return nil, domain.PromptInspection{}, errPromptNotFound
+	}
+	definition := entry.definition
+	definition.Inputs = append([]domain.PromptInput(nil), definition.Inputs...)
+	definition.Templates = append([]domain.PromptMessageTemplate(nil), definition.Templates...)
+	for index := range definition.Templates {
+		if control := definition.Templates[index].CacheControl; control != nil {
+			copy := *control
+			definition.Templates[index].CacheControl = &copy
+		}
+	}
+	inspection := entry.inspection
+	inspection.Inputs = append([]domain.PromptInput(nil), inspection.Inputs...)
+	return &definition, inspection, nil
+}
+
+// GetPromptSnapshot returns an independently owned captured definition and its
+// construction-time hash. Lookup retains literal ID and version keys.
+func (state *loaded) GetPromptSnapshot(ctx context.Context, id, version string) (*domain.PromptDefinition, string, error) {
+	if err := ctx.Err(); err != nil {
+		return nil, "", err
+	}
+	definition, inspection, err := state.prompt(id, version)
+	if errors.Is(err, errPromptNotFound) {
+		return nil, "", promptdef.ErrPromptDefinitionNotFound
+	}
+	if err != nil {
+		return nil, "", err
+	}
+	return definition, inspection.PromptHash, nil
+}
+
+// GetPromptDefinition implements the runner's prompt lookup boundary.
+func (state *loaded) GetPromptDefinition(ctx context.Context, id, version string) (*domain.PromptDefinition, error) {
+	definition, _, err := state.GetPromptSnapshot(ctx, id, version)
+	return definition, err
+}
+
+// GetCompiledTemplates returns construction-time parses for one exact prompt.
+func (state *loaded) GetCompiledTemplates(id, version string) (prompt.CompiledTemplates, bool) {
+	if state == nil {
+		return prompt.CompiledTemplates{}, false
+	}
+	entry := state.prompts[id][version]
+	if entry == nil {
+		return prompt.CompiledTemplates{}, false
+	}
+	return prompt.CompiledTemplates{Session: entry.session, Messages: entry.messages}, true
+}

internal/configuration/prompts_test.go

@@ -0,0 +1,206 @@
+package configuration
+
+import (
+	"errors"
+	"io/fs"
+	"os"
+	"path/filepath"
+	"strings"
+	"testing"
+	"testing/fstest"
+
+	"gitea.maximumdirect.net/eric/ConfigKit"
+)
+
+func TestLoadCapturesInheritedImportedContent(t *testing.T) {
+	files := fstest.MapFS{
+		"app/main.yaml":     {Data: []byte("configkit:\n  imports:\n    - path: ../catalog/base.yaml\nprompts:\n  child:\n    extends: base\n")},
+		"catalog/base.yaml": {Data: []byte("prompts:\n  base:\n    v1:\n      messages:\n        - role: ' USER '\n          cache_control:\n            type: ' ephemeral '\n            ttl: ' 1h '\n          content_file: ./body.md\n      output:\n        format: text\n        validation_mode: basic\n")},
+		"catalog/body.md":   {Data: []byte("Captured {{.name}}")},
+	}
+	namespace := configkit.NewFilesystem("embedded", files)
+	state, err := load(configkit.Input{
+		Source: namespace.File("app/main.yaml"), Imports: true,
+		Filesystem: &configkit.FilesystemContext{FS: &namespace, Root: "."},
+	}, nil)
+	if err != nil {
+		var loadError *configkit.LoadError
+		if errors.As(err, &loadError) {
+			t.Fatalf("%v: %+v", err, loadError.Diagnostics())
+		}
+		t.Fatal(err)
+	}
+	definition, inspection, err := state.prompt("child", "")
+	if err != nil {
+		t.Fatal(err)
+	}
+	if definition.Templates[0].Content != "Captured {{.name}}" || inspection.PromptHash == "" {
+		t.Fatalf("inherited file content was not captured: %+v, %+v", definition, inspection)
+	}
+	message := definition.Templates[0]
+	if message.Role != "user" || message.CacheControl == nil || message.CacheControl.Type != "ephemeral" || message.CacheControl.TTL != "1h" {
+		t.Fatalf("message metadata was not normalized: %+v", message)
+	}
+	field, ok := state.result.Metadata().Lookup(configkit.Keys("prompts", "child", "v1", "messages").Index(0).Key("content_file"))
+	if !ok || len(field.Origin.Locations) != 1 {
+		t.Fatalf("content origin was lost during normalization: %+v", field)
+	}
+	var originPath string
+	for _, source := range state.result.Sources() {
+		if source.ID == field.Origin.Locations[0].SourceID {
+			originPath = source.Path
+		}
+	}
+	if originPath != "catalog/base.yaml" {
+		t.Fatalf("content origin = %q, want catalog/base.yaml", originPath)
+	}
+	files["catalog/body.md"].Data = []byte("Changed")
+	again, againInspection, err := state.prompt("child", "v1")
+	if err != nil || again.Templates[0].Content != "Captured {{.name}}" || againInspection.PromptHash != inspection.PromptHash {
+		t.Fatalf("captured definition changed after source mutation: %+v, %+v, %v", again, againInspection, err)
+	}
+	definition.Templates[0].Content = "caller mutation"
+	third, _, err := state.prompt("child", "v1")
+	if err != nil || third.Templates[0].Content != "Captured {{.name}}" {
+		t.Fatalf("caller mutation escaped into index: %+v, %v", third, err)
+	}
+}
+
+func TestLoadUsesExplicitMappingContextAndClosesContent(t *testing.T) {
+	filesystem := &countingFS{FS: fstest.MapFS{
+		"assets/body.md": {Data: []byte("From mapping")},
+	}}
+	namespace := configkit.NewFilesystem("mapping-context", filesystem)
+	source := configkit.Mapping("application", promptWithFile("body.md"))
+	state, err := load(configkit.Input{
+		Source:     source,
+		Filesystem: &configkit.FilesystemContext{FS: &namespace, Root: ".", BaseDir: "assets"},
+	}, nil)
+	if err != nil {
+		t.Fatal(err)
+	}
+	definition, _, err := state.prompt("example", "v1")
+	if err != nil || definition.Templates[0].Content != "From mapping" || filesystem.contentOpened != 1 || filesystem.contentClosed != 1 {
+		t.Fatalf("mapping context or handle ownership failed: %+v, opens=%d closes=%d, %v", definition, filesystem.contentOpened, filesystem.contentClosed, err)
+	}
+	_, err = load(mapping("contextless", promptWithFile("body.md")), nil)
+	if err == nil || !strings.Contains(err.Error(), "/prompts/example/v1/messages/0/content_file") {
+		t.Fatalf("expected semantic path for contextless resource, got %v", err)
+	}
+}
+
+func TestLoadCapturesNativeContentFile(t *testing.T) {
+	root := t.TempDir()
+	definitionPath := filepath.Join(root, "definition.yaml")
+	contentPath := filepath.Join(root, "body.md")
+	if err := os.WriteFile(definitionPath, []byte("prompts:\n  example:\n    v1:\n      messages:\n        - role: user\n          content_file: body.md\n      output:\n        format: text\n        validation_mode: basic\n"), 0o600); err != nil {
+		t.Fatal(err)
+	}
+	if err := os.WriteFile(contentPath, []byte("Native body"), 0o600); err != nil {
+		t.Fatal(err)
+	}
+	state, err := load(configkit.Input{Source: configkit.File(definitionPath), Filesystem: &configkit.FilesystemContext{Root: root}}, nil)
+	if err != nil {
+		t.Fatal(err)
+	}
+	if err := os.WriteFile(contentPath, []byte("Modified"), 0o600); err != nil {
+		t.Fatal(err)
+	}
+	definition, _, err := state.prompt("example", "v1")
+	if err != nil || definition.Templates[0].Content != "Native body" {
+		t.Fatalf("native content was not captured: %+v, %v", definition, err)
+	}
+}
+
+func TestLoadRejectsMalformedStaticSyntaxAndAmbiguousSelection(t *testing.T) {
+	_, err := load(mapping("bad-template", map[string]any{"prompts": map[string]any{"example": map[string]any{
+		"v1": map[string]any{"messages": []any{map[string]any{"role": "user", "content": "{{if}}"}},
+			"output": map[string]any{"format": "text", "validation_mode": "basic"}},
+	}}}), nil)
+	if err == nil || !strings.Contains(err.Error(), "invalid template syntax") {
+		t.Fatalf("expected construction-time syntax error, got %v", err)
+	}
+	state, err := load(mapping("versions", map[string]any{"prompts": map[string]any{"example": map[string]any{
+		"v1": map[string]any{"messages": []any{map[string]any{"role": "user", "content": "one"}},
+			"output": map[string]any{"format": "text", "validation_mode": "basic"}},
+		"v2": map[string]any{"messages": []any{map[string]any{"role": "user", "content": "two"}},
+			"output": map[string]any{"format": "text", "validation_mode": "basic"}},
+	}}}), nil)
+	if err != nil {
+		t.Fatal(err)
+	}
+	if _, _, err := state.prompt("example", ""); !errors.Is(err, errPromptAmbiguous) {
+		t.Fatalf("expected ambiguous version selection, got %v", err)
+	}
+}
+
+func TestLoadAcceptsEmptyInlineContentAndRejectsInvalidPromptFields(t *testing.T) {
+	state, err := load(mapping("empty-content", map[string]any{"prompts": map[string]any{" exact.id ": map[string]any{"v1": map[string]any{
+		"inputs": []any{map[string]any{"name": " note ", "required": true}},
+		"messages": []any{map[string]any{"role": " USER ", "content": "", "content_file": nil,
+			"cache_control": map[string]any{"type": " ephemeral ", "ttl": "1h "}}},
+		"output": map[string]any{"format": "text", "validation_mode": "basic"},
+	}}}}), nil)
+	if err != nil {
+		var loadError *configkit.LoadError
+		if errors.As(err, &loadError) {
+			t.Fatalf("%v: %+v", err, loadError.Diagnostics())
+		}
+		t.Fatal(err)
+	}
+	definition, _, err := state.prompt(" exact.id ", "v1")
+	if err != nil || definition.ID != " exact.id " || definition.Templates[0].Content != "" || definition.Templates[0].Role != "user" ||
+		definition.Inputs[0].Name != "note" || definition.Templates[0].CacheControl.TTL != "1h" {
+		t.Fatalf("explicit empty content or literal ID was changed: %+v, %v", definition, err)
+	}
+	if _, _, err := state.prompt("exact.id", "v1"); !errors.Is(err, errPromptNotFound) {
+		t.Fatalf("trimmed prompt identity unexpectedly matched: %v", err)
+	}
+	_, err = load(mapping("obsolete-field", map[string]any{"prompts": map[string]any{"example": map[string]any{"v1": map[string]any{
+		"id": "example", "messages": []any{map[string]any{"role": "user", "content": "ok"}},
+		"output": map[string]any{"format": "text", "validation_mode": "basic"},
+	}}}}), nil)
+	var loadError *configkit.LoadError
+	if !errors.As(err, &loadError) {
+		t.Fatalf("obsolete identity field should fail strict decoding: %v", err)
+	}
+	_, err = load(mapping("null-prompt", map[string]any{"prompts": map[string]any{"example": nil}}), nil)
+	if err == nil {
+		t.Fatal("null prompt collection was accepted")
+	}
+}
+
+func promptWithFile(name string) map[string]any {
+	return map[string]any{"prompts": map[string]any{"example": map[string]any{"v1": map[string]any{
+		"messages": []any{map[string]any{"role": "user", "content_file": name}},
+		"output":   map[string]any{"format": "text", "validation_mode": "basic"},
+	}}}}
+}
+
+type countingFS struct {
+	fs.FS
+	contentOpened int
+	contentClosed int
+}
+
+func (filesystem *countingFS) Open(name string) (fs.File, error) {
+	file, err := filesystem.FS.Open(name)
+	if err != nil {
+		return nil, err
+	}
+	if name == "assets/body.md" {
+		filesystem.contentOpened++
+		return &countingFile{File: file, owner: filesystem}, nil
+	}
+	return file, nil
+}
+
+type countingFile struct {
+	fs.File
+	owner *countingFS
+}
+
+func (file *countingFile) Close() error {
+	file.owner.contentClosed++
+	return file.File.Close()
+}

internal/configuration/targets.go

@@ -0,0 +1,187 @@
+package configuration
+
+import (
+	"context"
+	"fmt"
+
+	"gitea.maximumdirect.net/eric/promptkit/internal/backend"
+	"gitea.maximumdirect.net/eric/promptkit/internal/defaults"
+	"gitea.maximumdirect.net/eric/promptkit/internal/domain"
+	"gitea.maximumdirect.net/eric/promptkit/internal/jsonvalue"
+	profilepkg "gitea.maximumdirect.net/eric/promptkit/internal/profile"
+)
+
+func (state *loaded) buildExecutionProfiles() error {
+	definitions := make(map[string]domain.Backend, len(state.result.Config.Backends))
+	for _, id := range sortedKeys(state.result.Config.Backends) {
+		config := state.result.Config.Backends[id]
+		params, err := jsonvalue.CopyMap(config.ExtraParams)
+		if err != nil {
+			return fmt.Errorf("backend %q extra parameters: %w", id, err)
+		}
+		definition := domain.Backend{ID: id, ExtraParams: params}
+		if config.Endpoint != nil {
+			definition.Endpoint = *config.Endpoint
+		}
+		if config.APIKeyEnv != nil {
+			definition.APIKeyEnv = *config.APIKeyEnv
+		}
+		if config.ConcurrencyLimit != nil {
+			definition.ConcurrencyLimit = *config.ConcurrencyLimit
+		}
+		if config.QueueCapacity != nil {
+			definition.QueueCapacity = *config.QueueCapacity
+			definition.QueueCapacitySet = definition.ConcurrencyLimit > 0
+		}
+		definitions[id] = definition
+	}
+	registry, err := backend.NewEffectiveRegistry(definitions)
+	if err != nil {
+		return err
+	}
+	state.registry = registry
+	state.indexedProfiles = make(map[string]domain.ExecutionProfile, len(state.result.Config.Profiles))
+	for _, id := range sortedKeys(state.result.Config.Profiles) {
+		config := state.result.Config.Profiles[id]
+		fields := state.profiles[id]
+		target := defaults.ExecutionTargetDefault()
+		if config.Backend != nil && *config.Backend != "" {
+			selected, err := registry.GetBackend(*config.Backend)
+			if err != nil {
+				return fmt.Errorf("profile %q backend: %w", id, err)
+			}
+			target.BackendID = selected.ID
+			target.Endpoint = selected.Endpoint
+			target.APIKeyEnv = selected.APIKeyEnv
+			target.ExtraParams = selected.ExtraParams
+		}
+		presence := domain.ExecutionTargetPresence{}
+		if fields["endpoint"] != fieldAbsent {
+			target.Endpoint = valueOrZero(config.Endpoint)
+		}
+		if fields["model"] != fieldAbsent {
+			target.Model = valueOrZero(config.Model)
+		}
+		if fields["temperature"] != fieldAbsent {
+			target.Temperature = valueOrZero(config.Temperature)
+			presence.Temperature = fields["temperature"] == fieldValue
+		}
+		if fields["top_p"] != fieldAbsent {
+			target.TopP = valueOrZero(config.TopP)
+			presence.TopP = fields["top_p"] == fieldValue
+		}
+		if fields["max_tokens"] != fieldAbsent {
+			target.MaxTokens = valueOrZero(config.MaxTokens)
+			presence.MaxTokens = fields["max_tokens"] == fieldValue
+		}
+		if fields["timeout_seconds"] == fieldValue {
+			target.TimeoutSeconds = valueOrZero(config.TimeoutSeconds)
+			presence.TimeoutSeconds = true
+		}
+		if fields["service_tier"] != fieldAbsent {
+			target.ServiceTier = valueOrZero(config.ServiceTier)
+		}
+		if fields["reasoning_effort"] != fieldAbsent {
+			target.ReasoningEffort = valueOrZero(config.ReasoningEffort)
+		}
+		if fields["api_key_env"] != fieldAbsent {
+			target.APIKeyEnv = valueOrZero(config.APIKeyEnv)
+		}
+		if fields["api_key_required"] != fieldAbsent {
+			target.APIKeyRequired = valueOrZero(config.APIKeyRequired)
+		}
+		if target.APIKeyRequired && fields["api_key_env"] == fieldAbsent {
+			target.APIKeyEnv = ""
+		}
+		switch fields["extra_params"] {
+		case fieldNull:
+			target.ExtraParams = nil
+		case fieldValue:
+			merged, err := overlayProviderMap(target.ExtraParams, config.ExtraParams)
+			if err != nil {
+				return fmt.Errorf("profile %q extra parameters: %w", id, err)
+			}
+			target.ExtraParams = merged
+		}
+		profile := domain.ExecutionProfile{ID: id, ResolvedTarget: &target, TargetPresence: presence}
+		state.indexedProfiles[id] = profile
+	}
+	return nil
+}
+
+func valueOrZero[T any](value *T) T {
+	if value == nil {
+		var zero T
+		return zero
+	}
+	return *value
+}
+
+// overlayProviderMap applies only the backend-to-profile JSON-object default
+// merge. ConfigKit has already resolved source layering and inheritance.
+func overlayProviderMap(lower, upper map[string]any) (map[string]any, error) {
+	merged, err := jsonvalue.CopyMap(lower)
+	if err != nil {
+		return nil, err
+	}
+	if merged == nil {
+		merged = make(map[string]any)
+	}
+	for key, value := range upper {
+		if child, ok := value.(map[string]any); ok {
+			if existing, ok := merged[key].(map[string]any); ok {
+				combined, err := overlayProviderMap(existing, child)
+				if err != nil {
+					return nil, err
+				}
+				merged[key] = combined
+				continue
+			}
+		}
+		copied, err := jsonvalue.Copy(value)
+		if err != nil {
+			return nil, err
+		}
+		merged[key] = copied
+	}
+	return merged, nil
+}
+
+// GetProfile returns an independently owned indexed profile for the internal
+// runner's lookup boundary.
+func (state *loaded) GetProfile(ctx context.Context, id string) (*domain.ExecutionProfile, error) {
+	if err := ctx.Err(); err != nil {
+		return nil, err
+	}
+	if state == nil {
+		return nil, fmt.Errorf("%w: %q", profilepkg.ErrProfileNotFound, id)
+	}
+	profile, found := state.indexedProfiles[id]
+	if !found {
+		return nil, fmt.Errorf("%w: %q", profilepkg.ErrProfileNotFound, id)
+	}
+	target := *profile.ResolvedTarget
+	params, err := jsonvalue.CopyMap(target.ExtraParams)
+	if err != nil {
+		return nil, err
+	}
+	target.ExtraParams = params
+	profile.ResolvedTarget = &target
+	return &profile, nil
+}
+
+// GetBackend returns an independently owned effective backend definition.
+func (state *loaded) GetBackend(id string) (domain.Backend, error) {
+	if state == nil {
+		return domain.Backend{}, fmt.Errorf("backend registry is not configured")
+	}
+	return state.registry.GetBackend(id)
+}
+
+// CapacityPolicies returns the selected backend admission policies.
+func (state *loaded) CapacityPolicies() map[string]domain.BackendCapacityPolicy {
+	if state == nil {
+		return nil
+	}
+	return state.registry.CapacityPolicies()
+}

internal/configuration/targets_test.go

@@ -0,0 +1,152 @@
+package configuration
+
+import (
+	"context"
+	"encoding/json"
+	"net/http"
+	"net/http/httptest"
+	"reflect"
+	"testing"
+
+	"gitea.maximumdirect.net/eric/promptkit/internal/defaults"
+	"gitea.maximumdirect.net/eric/promptkit/internal/domain"
+	"gitea.maximumdirect.net/eric/promptkit/internal/llm"
+)
+
+func TestLoadBuildsEffectiveTargetsAfterInheritance(t *testing.T) {
+	state, err := load(mapping("effective-targets", map[string]any{
+		"backends": map[string]any{
+			"first": map[string]any{"endpoint": "https://first.example/v1", "api_key_env": "FIRST_KEY",
+				"extra_params": map[string]any{"source": "first", "nested": map[string]any{"old": true}}},
+			"second": map[string]any{"endpoint": "https://second.example/v1", "api_key_env": "SECOND_KEY",
+				"concurrency_limit": 2, "queue_capacity": 0,
+				"extra_params": map[string]any{"source": "second", "nested": map[string]any{"backend": true}}},
+		},
+		"profiles": map[string]any{
+			"base": map[string]any{"backend": "first", "model": "model", "temperature": 0.8,
+				"top_p": 0.9, "max_tokens": 100, "timeout_seconds": 30, "api_key_required": true,
+				"extra_params": map[string]any{"nested": map[string]any{"profile": true}}},
+			"child": map[string]any{"extends": "base", "backend": "second", "temperature": 0.0,
+				"top_p": nil, "max_tokens": 0, "timeout_seconds": nil, "api_key_env": nil,
+				"api_key_required": false,
+				"extra_params":     map[string]any{"nested": map[string]any{"child": nil}}},
+			"direct-key":       map[string]any{"backend": "second", "api_key_required": true},
+			"named-key":        map[string]any{"backend": "second", "api_key_required": true, "api_key_env": "CUSTOM_KEY"},
+			"no-provider-map":  map[string]any{"backend": "second", "extra_params": nil},
+			"no-timeout":       map[string]any{"backend": "second", "timeout_seconds": 0},
+			"partial":          map[string]any{},
+			"endpoint-only":    map[string]any{"endpoint": "https://standalone.example/v1"},
+			"cleared-endpoint": map[string]any{"extends": "base", "endpoint": nil},
+		},
+	}), nil)
+	if err != nil {
+		t.Fatal(err)
+	}
+	selected, err := state.registry.GetBackend("second")
+	if err != nil || selected.QueueCapacity != 0 || !selected.QueueCapacitySet {
+		t.Fatalf("backend capacity was not preserved: %+v, %v", selected, err)
+	}
+	child, err := state.GetProfile(context.Background(), "child")
+	if err != nil {
+		t.Fatal(err)
+	}
+	if _, err := state.GetProfile(context.Background(), " child "); err == nil {
+		t.Fatal("profile lookup silently changed a literal ID")
+	}
+	target := child.ResolvedTarget
+	if target.BackendID != "second" || target.Endpoint != "https://second.example/v1" || target.Model != "model" ||
+		target.Temperature != 0 || target.TopP != 0 || target.MaxTokens != 0 ||
+		target.TimeoutSeconds != defaults.ExecutionDefaultTimeoutSeconds || target.APIKeyEnv != "" || target.APIKeyRequired {
+		t.Fatalf("effective child target is wrong: %+v", target)
+	}
+	if !child.TargetPresence.Temperature || !child.TargetPresence.MaxTokens || child.TargetPresence.TopP || child.TargetPresence.TimeoutSeconds {
+		t.Fatalf("numeric presence was not retained: %+v", child.TargetPresence)
+	}
+	wantParams := map[string]any{"source": "second", "nested": map[string]any{
+		"backend": true, "profile": true, "child": nil,
+	}}
+	if !reflect.DeepEqual(target.ExtraParams, wantParams) {
+		t.Fatalf("backend/profile provider map overlay failed: %+v", target.ExtraParams)
+	}
+	if _, exists := target.ExtraParams["nested"].(map[string]any)["old"]; exists {
+		t.Fatal("previous backend derived parameter leaked into child")
+	}
+	for id, wantEnv := range map[string]string{"direct-key": "", "named-key": "CUSTOM_KEY"} {
+		profile, err := state.GetProfile(context.Background(), id)
+		if err != nil || profile.ResolvedTarget.APIKeyEnv != wantEnv {
+			t.Fatalf("credential source for %s: %+v, %v", id, profile, err)
+		}
+	}
+	noMap, _ := state.GetProfile(context.Background(), "no-provider-map")
+	if noMap.ResolvedTarget.ExtraParams != nil {
+		t.Fatalf("explicit null provider map did not suppress backend defaults: %+v", noMap.ResolvedTarget.ExtraParams)
+	}
+	noTimeout, _ := state.GetProfile(context.Background(), "no-timeout")
+	if noTimeout.ResolvedTarget.TimeoutSeconds != 0 || !noTimeout.TargetPresence.TimeoutSeconds {
+		t.Fatalf("explicit zero timeout was lost: %+v", noTimeout)
+	}
+	partial, _ := state.GetProfile(context.Background(), "partial")
+	if partial.ResolvedTarget.Endpoint != "" || partial.ResolvedTarget.Model != "" {
+		t.Fatalf("partial profile gained a runnable target: %+v", partial.ResolvedTarget)
+	}
+	endpointOnly, _ := state.GetProfile(context.Background(), "endpoint-only")
+	if endpointOnly.ResolvedTarget.Endpoint != "https://standalone.example/v1" ||
+		endpointOnly.ResolvedTarget.BackendID != "" || endpointOnly.ResolvedTarget.Model != "" {
+		t.Fatalf("endpoint-only profile was not retained: %+v", endpointOnly.ResolvedTarget)
+	}
+	clearedEndpoint, _ := state.GetProfile(context.Background(), "cleared-endpoint")
+	if clearedEndpoint.ResolvedTarget.Endpoint != "" || clearedEndpoint.ResolvedTarget.BackendID != "first" {
+		t.Fatalf("explicit null recovered backend endpoint: %+v", clearedEndpoint.ResolvedTarget)
+	}
+	child.ResolvedTarget.ExtraParams["source"] = "mutated"
+	again, _ := state.GetProfile(context.Background(), "child")
+	if again.ResolvedTarget.ExtraParams["source"] != "second" {
+		t.Fatal("profile lookup exposed snapshot ownership")
+	}
+}
+
+func TestLoadedZeroControlsReachBuiltInRequest(t *testing.T) {
+	payloads := make(chan map[string]any, 1)
+	server := httptest.NewServer(http.HandlerFunc(func(writer http.ResponseWriter, request *http.Request) {
+		var payload map[string]any
+		if err := json.NewDecoder(request.Body).Decode(&payload); err != nil {
+			writer.WriteHeader(http.StatusBadRequest)
+			return
+		}
+		payloads <- payload
+		writer.Header().Set("Content-Type", "application/json")
+		_, _ = writer.Write([]byte(`{"choices":[{"message":{"content":"ok"}}]}`))
+	}))
+	defer server.Close()
+	state, err := load(mapping("wire-controls", map[string]any{
+		"backends": map[string]any{"local": map[string]any{"endpoint": server.URL + "/v1"}},
+		"profiles": map[string]any{"direct": map[string]any{
+			"backend": "local", "model": "example", "temperature": 0.0, "max_tokens": 0, "top_p": nil,
+		}},
+	}), nil)
+	if err != nil {
+		t.Fatal(err)
+	}
+	profile, err := state.GetProfile(context.Background(), "direct")
+	if err != nil {
+		t.Fatal(err)
+	}
+	client, err := llm.NewOpenAICompatibleClient(llm.OpenAICompatibleConfig{})
+	if err != nil {
+		t.Fatal(err)
+	}
+	_, err = client.Generate(context.Background(), domain.GenerateRequest{
+		Prompt: domain.RenderedPrompt{Messages: []domain.RenderedMessage{{Role: "user", Content: "hello"}}},
+		Target: *profile.ResolvedTarget, TargetPresence: profile.TargetPresence,
+	})
+	if err != nil {
+		t.Fatal(err)
+	}
+	payload := <-payloads
+	if payload["temperature"] != float64(0) || payload["max_tokens"] != float64(0) {
+		t.Fatalf("explicit zeros were omitted from outbound request: %+v", payload)
+	}
+	if _, exists := payload["top_p"]; exists {
+		t.Fatalf("explicit null top_p was sent: %+v", payload)
+	}
+}

internal/domain/domain.go

@@ -192,22 +192,11 @@ type BackendCapacityPolicy struct {
 	QueueCapacity    int
 }
 
-// ExecutionProfile describes how and where to execute a model.
+// ExecutionProfile holds a captured configuration target for execution.
 type ExecutionProfile struct {
-	ID              string         `yaml:"id"`
-	BaseProfileID   string         `yaml:"base_profile"`
-	BackendID       string         `yaml:"backend"`
-	Endpoint        string         `yaml:"endpoint"`
-	Model           string         `yaml:"model"`
-	Temperature     float64        `yaml:"temperature"`
-	MaxTokens       int            `yaml:"max_tokens"`
-	TopP            float64        `yaml:"top_p"`
-	TimeoutSeconds  int            `yaml:"timeout_seconds"`
-	ServiceTier     string         `yaml:"service_tier"`
-	ReasoningEffort string         `yaml:"reasoning_effort"`
-	APIKeyEnv       string         `yaml:"api_key_env"`
-	APIKeyRequired  bool           `yaml:"-" json:"-"`
-	ExtraParams     map[string]any `yaml:"extra_params"`
+	ID             string
+	ResolvedTarget *ExecutionTarget
+	TargetPresence ExecutionTargetPresence
 }
 
 // ExecutionTargetOverride represents per-request runtime setting overrides.
@@ -224,8 +213,9 @@ type ExecutionTargetOverride struct {
 	ExtraParams     map[string]any `json:"extra_params,omitempty"`
 }
 
-// ExecutionTargetPresence tracks which effective runtime fields came from an
-// explicit request override even when the resolved value is a zero value.
+// ExecutionTargetPresence tracks effective numeric values that must be sent
+// even when they are zero. Values may come from configuration or a request
+// override; explicit configuration null suppresses the corresponding bit.
 type ExecutionTargetPresence struct {
 	Temperature    bool
 	MaxTokens      bool

internal/engine/engine.go

@@ -11,49 +11,42 @@ import (
 	"strings"
 	"time"
 
-	openrouter "gitea.maximumdirect.net/eric/promptkit-backend-openrouter/v2"
-	rakestrawhome "gitea.maximumdirect.net/eric/promptkit-backend-rakestrawhome/v2"
+	"gitea.maximumdirect.net/eric/ConfigKit"
 	"gitea.maximumdirect.net/eric/promptkit/internal/artifact"
-	"gitea.maximumdirect.net/eric/promptkit/internal/backend"
 	"gitea.maximumdirect.net/eric/promptkit/internal/capacity"
 	"gitea.maximumdirect.net/eric/promptkit/internal/catalog"
+	"gitea.maximumdirect.net/eric/promptkit/internal/configuration"
 	"gitea.maximumdirect.net/eric/promptkit/internal/defaults"
 	"gitea.maximumdirect.net/eric/promptkit/internal/domain"
 	"gitea.maximumdirect.net/eric/promptkit/internal/generation"
 	"gitea.maximumdirect.net/eric/promptkit/internal/llm"
-	"gitea.maximumdirect.net/eric/promptkit/internal/profile"
 	"gitea.maximumdirect.net/eric/promptkit/internal/prompt"
-	"gitea.maximumdirect.net/eric/promptkit/internal/promptdef"
 	"gitea.maximumdirect.net/eric/promptkit/internal/usecase"
 	"gitea.maximumdirect.net/eric/promptkit/internal/validate"
 )
 
 // Config carries construction settings selected by the public facade.
 type Config struct {
-	PromptDir        string
-	ProfileDir       string
+	Sources          ConfigurationSources
 	SchemaDir        string
 	Timeout          time.Duration
 	HTTPClient       *http.Client
 	TransientRetries *int
 }
 
+// ConfigurationSources identifies caller-selected ConfigKit layers.
+type ConfigurationSources struct {
+	Underlays []configkit.Underlay
+	Main      *configkit.Input
+}
+
 // Options collects construction choices from the public facade.
 type Options struct {
-	llmClient             llm.Client
-	artifactReader        artifact.Reader
-	promptDefinitions     promptdef.Repository
-	profiles              profile.Repository
-	fallbackProfiles      profile.Repository
-	memoryProfiles        profile.Repository
-	backends              []domain.Backend
-	validator             validate.Validator
-	promptSource          bool
-	profileSource         bool
-	fallbackProfileSource bool
-	memorySource          bool
-	validatorSource       bool
-	artifactSource        bool
+	llmClient       llm.Client
+	artifactReader  artifact.Reader
+	validator       validate.Validator
+	validatorSource bool
+	artifactSource  bool
 }
 
 // SetLLMClient selects the client collaborator for one engine.
@@ -65,72 +58,6 @@ func (o *Options) SetArtifactReader(reader artifact.Reader) {
 	o.artifactSource = true
 }
 
-// SetPromptFS selects a prompt source rooted in fsys.
-func (o *Options) SetPromptFS(fsys fs.FS, root string) error {
-	if err := validateSourceFS(fsys, root); err != nil {
-		return err
-	}
-	o.promptDefinitions = promptdef.NewFSRepository(fsys, root)
-	o.promptSource = true
-	return nil
-}
-
-// SetPromptFile selects a single prompt file.
-func (o *Options) SetPromptFile(path string) error {
-	fsys, root, directory, err := fileSource(path)
-	if err != nil {
-		return err
-	}
-	o.promptDefinitions = promptdef.NewFileRepository(fsys, root, directory)
-	o.promptSource = true
-	return nil
-}
-
-// SetProfileFS selects an ordinary profile source rooted in fsys.
-func (o *Options) SetProfileFS(fsys fs.FS, root string) error {
-	if err := validateSourceFS(fsys, root); err != nil {
-		return err
-	}
-	o.profiles = profile.NewFSRepository(fsys, root)
-	o.profileSource = true
-	return nil
-}
-
-// SetProfileFile selects a single ordinary profile file.
-func (o *Options) SetProfileFile(path string) error {
-	fsys, root, _, err := fileSource(path)
-	if err != nil {
-		return err
-	}
-	o.profiles = profile.NewFSRepository(fsys, root)
-	o.profileSource = true
-	return nil
-}
-
-// SetFallbackProfileFS selects a fallback profile source rooted in fsys.
-func (o *Options) SetFallbackProfileFS(fsys fs.FS, root string) error {
-	if err := validateSourceFS(fsys, root); err != nil {
-		return err
-	}
-	o.fallbackProfiles = profile.NewFSRepository(fsys, root)
-	o.fallbackProfileSource = true
-	return nil
-}
-
-// SetMemoryProfiles validates and stores application-owned profile definitions.
-func (o *Options) SetMemoryProfiles(definitions []domain.ExecutionProfile) error {
-	repository, err := profile.NewMemoryRepository(definitions)
-	if err != nil {
-		return err
-	}
-	o.memoryProfiles = repository
-	o.memorySource = true
-	return nil
-}
-
-// AddBackend appends one backend registration.
-func (o *Options) AddBackend(backend domain.Backend) { o.backends = append(o.backends, backend) }
-
 // SetSchemaFS selects a schema source rooted in fsys.
 func (o *Options) SetSchemaFS(fsys fs.FS, root string) error {
 	if err := validateSourceFS(fsys, root); err != nil {
@@ -154,7 +81,8 @@ func (o *Options) SetSchemaFile(path string) error {
 
 // Engine forwards domain operations to the single assembled use-case runner.
 type Engine struct {
-	runner *usecase.Runner
+	runner     *usecase.Runner
+	inspection configuration.Inspection
 }
 
 // New assembles an engine from facade-selected configuration and collaborators.
@@ -163,33 +91,20 @@ func New(cfg Config, options Options) (*Engine, error) {
 	if err != nil {
 		return nil, err
 	}
-	promptDefinitions := options.promptDefinitions
-	if !options.promptSource {
-		if strings.TrimSpace(cfg.PromptDir) == "" {
-			return nil, fmt.Errorf("prompt directory is required")
-		}
-		promptDefinitions = promptdef.NewFilesystemRepository(cfg.PromptDir)
-	}
-
-	maintained, err := catalog.Load(
-		catalog.Source{Name: "OpenRouter", ExpectedBackendID: backend.OpenRouterID, FS: openrouter.FS(), Root: openrouter.Root},
-		catalog.Source{Name: "Rakestrawhome", ExpectedBackendID: backend.RakestrawHomeID, FS: rakestrawhome.FS(), Root: rakestrawhome.Root},
-	)
+	underlays, err := catalog.Underlays()
 	if err != nil {
-		return nil, fmt.Errorf("failed to load maintained catalogs: %w", err)
+		return nil, fmt.Errorf("select maintained configuration: %w", err)
 	}
-
-	maintainedProfiles, err := newMaintainedProfileRepository(maintained.Profiles, maintained.Backends)
+	underlays = append(underlays, cfg.Sources.Underlays...)
+	main := configkit.Input{Source: configkit.NoSource()}
+	if cfg.Sources.Main != nil {
+		main = *cfg.Sources.Main
+	}
+	snapshot, err := configuration.Load(main, underlays)
 	if err != nil {
-		return nil, fmt.Errorf("failed to construct Promptkit-maintained profiles: %w", err)
+		return nil, err
 	}
-
-	profiles := newProfileRepository(cfg.ProfileDir, options, maintainedProfiles)
-	registry, err := backend.NewRegistry(maintained.Backends, options.backends)
-	if err != nil {
-		return nil, fmt.Errorf("failed to construct backend registry: %w", err)
-	}
-	manager, err := capacity.NewManager(registry.CapacityPolicies())
+	manager, err := capacity.NewManager(snapshot.CapacityPolicies())
 	if err != nil {
 		return nil, fmt.Errorf("failed to construct backend capacity manager: %w", err)
 	}
@@ -217,23 +132,18 @@ func New(cfg Config, options Options) (*Engine, error) {
 		reader = artifact.NewCompositeReader()
 	}
 
-	return &Engine{runner: usecase.NewRunnerWithRepairer(promptDefinitions, profiles, registry, reader, prompt.NewGoRenderer(), client, validator, usecase.NewDefaultOutputRepairer(client), manager, defaultRetries)}, nil
+	return &Engine{
+		runner:     usecase.NewRunnerWithRepairer(snapshot, snapshot, reader, prompt.NewCompiledRenderer(snapshot), client, validator, usecase.NewDefaultOutputRepairer(client), manager, defaultRetries),
+		inspection: snapshot.Inspection(),
+	}, nil
 }
 
-func newProfileRepository(profileDir string, options Options, maintained profile.Repository) profile.Repository {
-	repository := maintained
-	if options.fallbackProfileSource {
-		repository = profile.NewOverlayRepository(options.fallbackProfiles, repository)
+// InspectConfiguration returns read-only operations over the captured result.
+func (e *Engine) InspectConfiguration() configuration.Inspection {
+	if e == nil {
+		return nil
 	}
-	if options.profileSource {
-		repository = profile.NewOverlayRepository(options.profiles, repository)
-	} else if strings.TrimSpace(profileDir) != "" {
-		repository = profile.NewOverlayRepository(profile.NewFilesystemRepository(profileDir), repository)
-	}
-	if options.memorySource {
-		repository = profile.NewOverlayRepository(options.memoryProfiles, repository)
-	}
-	return profile.NewResolvingRepository(repository)
+	return e.inspection
 }
 
 func validateSourceFS(fsys fs.FS, root string) error {

internal/engine/maintained_profiles.go

@@ -1,50 +0,0 @@
-package engine
-
-import (
-	"context"
-	"fmt"
-
-	"gitea.maximumdirect.net/eric/promptkit/internal/backend"
-	"gitea.maximumdirect.net/eric/promptkit/internal/domain"
-	"gitea.maximumdirect.net/eric/promptkit/internal/profile"
-)
-
-func maintainedProfileDefinitions() []domain.ExecutionProfile {
-	return []domain.ExecutionProfile{
-		{
-			ID:            "promptkit-openrouter-standard",
-			BaseProfileID: "gemini-flash-latest",
-		},
-		{
-			ID:        "promptkit-openrouter-auto",
-			BackendID: backend.OpenRouterID,
-			Model:     "openrouter/auto",
-		},
-	}
-}
-
-func newMaintainedProfileRepository(catalogProfiles profile.Repository, maintainedBackends []domain.Backend) (profile.Repository, error) {
-	definitions := maintainedProfileDefinitions()
-	owned, err := profile.NewMemoryRepository(definitions)
-	if err != nil {
-		return nil, fmt.Errorf("create Promptkit-maintained profiles: %w", err)
-	}
-
-	combined := profile.NewOverlayRepository(owned, catalogProfiles)
-	resolved := profile.NewResolvingRepository(combined)
-	registry, err := backend.NewRegistry(maintainedBackends, nil)
-	if err != nil {
-		return nil, fmt.Errorf("construct maintained backend registry: %w", err)
-	}
-	for _, definition := range definitions {
-		effective, err := resolved.GetProfile(context.Background(), definition.ID)
-		if err != nil {
-			return nil, fmt.Errorf("resolve Promptkit-maintained profile %q: %w", definition.ID, err)
-		}
-		if _, err := registry.GetBackend(effective.BackendID); err != nil {
-			return nil, fmt.Errorf("Promptkit-maintained profile %q selects unavailable backend %q: %w", definition.ID, effective.BackendID, err)
-		}
-	}
-
-	return combined, nil
-}

internal/engine/maintained_profiles_test.go

@@ -1,78 +0,0 @@
-package engine
-
-import (
-	"context"
-	"testing"
-
-	"gitea.maximumdirect.net/eric/promptkit/internal/backend"
-	"gitea.maximumdirect.net/eric/promptkit/internal/domain"
-	"gitea.maximumdirect.net/eric/promptkit/internal/profile"
-)
-
-func TestNewMaintainedProfileRepository(t *testing.T) {
-	newCatalogProfiles := func(t *testing.T, definitions []domain.ExecutionProfile) profile.Repository {
-		t.Helper()
-		repository, err := profile.NewMemoryRepository(definitions)
-		if err != nil {
-			t.Fatalf("create catalog profiles: %v", err)
-		}
-		return repository
-	}
-	newBackend := func(id string) domain.Backend {
-		return domain.Backend{ID: id, Endpoint: "https://" + id + ".example/v1", APIKeyEnv: "TEST_API_KEY"}
-	}
-
-	t.Run("resolves inherited and direct definitions", func(t *testing.T) {
-		repository, err := newMaintainedProfileRepository(
-			newCatalogProfiles(t, []domain.ExecutionProfile{{
-				ID:        "gemini-flash-latest",
-				BackendID: backend.OpenRouterID,
-				Model:     "catalog-selected-model",
-			}}),
-			[]domain.Backend{newBackend(backend.OpenRouterID)},
-		)
-		if err != nil {
-			t.Fatalf("create maintained profiles: %v", err)
-		}
-
-		resolved := profile.NewResolvingRepository(repository)
-		standard, err := resolved.GetProfile(context.Background(), "promptkit-openrouter-standard")
-		if err != nil {
-			t.Fatalf("resolve inherited profile: %v", err)
-		}
-		if standard.BackendID != backend.OpenRouterID || standard.Model != "catalog-selected-model" {
-			t.Fatalf("unexpected inherited profile: %#v", standard)
-		}
-
-		auto, err := resolved.GetProfile(context.Background(), "promptkit-openrouter-auto")
-		if err != nil {
-			t.Fatalf("resolve direct profile: %v", err)
-		}
-		definitions := maintainedProfileDefinitions()
-		if auto.BackendID != definitions[1].BackendID || auto.Model != definitions[1].Model {
-			t.Fatalf("unexpected direct profile: %#v", auto)
-		}
-	})
-
-	t.Run("rejects a missing inherited base", func(t *testing.T) {
-		if _, err := newMaintainedProfileRepository(
-			newCatalogProfiles(t, nil),
-			[]domain.Backend{newBackend(backend.OpenRouterID)},
-		); err == nil {
-			t.Fatal("expected missing base error")
-		}
-	})
-
-	t.Run("rejects an unavailable effective backend", func(t *testing.T) {
-		if _, err := newMaintainedProfileRepository(
-			newCatalogProfiles(t, []domain.ExecutionProfile{{
-				ID:        "gemini-flash-latest",
-				BackendID: "other",
-				Model:     "catalog-selected-model",
-			}}),
-			[]domain.Backend{newBackend("other")},
-		); err == nil {
-			t.Fatal("expected unavailable backend error")
-		}
-	})
-}

internal/profile/definition.go

@@ -1,47 +0,0 @@
-package profile
-
-import (
-	"errors"
-	"strings"
-
-	"gitea.maximumdirect.net/eric/promptkit/internal/domain"
-)
-
-// NormalizeAndValidateDefinition normalizes and validates one source-local
-// profile definition without resolving a base profile.
-func NormalizeAndValidateDefinition(profile *domain.ExecutionProfile) error {
-	if profile == nil {
-		return errors.New("profile is required")
-	}
-
-	profile.ID = strings.TrimSpace(profile.ID)
-	profile.BaseProfileID = strings.TrimSpace(profile.BaseProfileID)
-	profile.BackendID = strings.TrimSpace(profile.BackendID)
-	profile.Endpoint = strings.TrimSpace(profile.Endpoint)
-
-	if profile.ID == "" {
-		return errors.New("id is required")
-	}
-	if profile.Endpoint != "" {
-		endpoint, err := domain.NormalizeOpenAICompatibleBaseEndpoint(profile.Endpoint)
-		if err != nil {
-			return err
-		}
-		profile.Endpoint = endpoint
-	}
-	if profile.BaseProfileID == "" {
-		if profile.BackendID == "" && profile.Endpoint == "" {
-			return errors.New("backend or endpoint is required")
-		}
-		if strings.TrimSpace(profile.Model) == "" {
-			return errors.New("model is required")
-		}
-	}
-
-	return domain.ValidateExecutionTargetSettings(domain.ExecutionTarget{
-		Temperature:    profile.Temperature,
-		MaxTokens:      profile.MaxTokens,
-		TopP:           profile.TopP,
-		TimeoutSeconds: profile.TimeoutSeconds,
-	})
-}

internal/profile/eager_repository.go

@@ -1,98 +0,0 @@
-package profile
-
-import (
-	"context"
-	"fmt"
-	"io/fs"
-	"sort"
-	"strings"
-
-	"gitea.maximumdirect.net/eric/promptkit/internal/domain"
-	"gitea.maximumdirect.net/eric/promptkit/internal/filecatalog"
-	"gitea.maximumdirect.net/eric/promptkit/internal/jsonvalue"
-)
-
-// LoadedProfileMetadata identifies one profile accepted by LoadFSRepository.
-type LoadedProfileMetadata struct {
-	// ID is the normalized profile ID.
-	ID string
-	// Path is the safe root-relative source path.
-	Path string
-	// ExplicitFields lists the sorted top-level YAML fields present in source.
-	ExplicitFields []string
-}
-
-// LoadFSRepository eagerly validates every profile under root and returns an
-// immutable raw repository and independently owned source metadata.
-func LoadFSRepository(ctx context.Context, fsys fs.FS, root string) (Repository, []LoadedProfileMetadata, error) {
-	if fsys == nil {
-		return nil, nil, fmt.Errorf("failed to read profile directory: filesystem is nil")
-	}
-	paths, err := filecatalog.FindFSYAMLFiles(ctx, fsys, root)
-	if err != nil {
-		return nil, nil, fmt.Errorf("failed to read profile directory: %w", err)
-	}
-
-	repository := &loadedRepository{profiles: make(map[string]domain.ExecutionProfile, len(paths))}
-	metadata := make([]LoadedProfileMetadata, 0, len(paths))
-	for _, path := range paths {
-		if err := ctx.Err(); err != nil {
-			return nil, nil, err
-		}
-		data, err := fs.ReadFile(fsys, path)
-		if err != nil {
-			return nil, nil, fmt.Errorf("failed to read profile file %s: %w", filecatalog.DisplayPath(root, path), err)
-		}
-		fileMetadata, err := readProfileFileMetadata(data)
-		if err != nil {
-			return nil, nil, fmt.Errorf("%w: %s", ErrInvalidYAML, filecatalog.DisplayPath(root, path))
-		}
-		if fileMetadata.hasRawAPIKey {
-			return nil, nil, fmt.Errorf("%w: %s", ErrRawAPIKeyNotAllowed, filecatalog.DisplayPath(root, path))
-		}
-		definition, err := decodeProfile(data)
-		if err != nil {
-			return nil, nil, fmt.Errorf("%w: %s", ErrInvalidYAML, filecatalog.DisplayPath(root, path))
-		}
-		definition.ExtraParams, err = jsonvalue.CopyMap(definition.ExtraParams)
-		if err != nil {
-			return nil, nil, fmt.Errorf("%w: %s", ErrInvalidProfile, filecatalog.DisplayPath(root, path))
-		}
-		if err := NormalizeAndValidateDefinition(definition); err != nil {
-			return nil, nil, fmt.Errorf("%w: %s", ErrInvalidProfile, filecatalog.DisplayPath(root, path))
-		}
-		if _, exists := repository.profiles[definition.ID]; exists {
-			return nil, nil, fmt.Errorf("%w: %s: duplicate profile ID", ErrInvalidProfile, filecatalog.DisplayPath(root, path))
-		}
-		repository.profiles[definition.ID] = *definition
-		fields := append([]string(nil), fileMetadata.explicitFields...)
-		sort.Strings(fields)
-		metadata = append(metadata, LoadedProfileMetadata{
-			ID:             definition.ID,
-			Path:           filecatalog.DisplayPath(root, path),
-			ExplicitFields: fields,
-		})
-	}
-	sort.Slice(metadata, func(left, right int) bool { return metadata[left].ID < metadata[right].ID })
-	return repository, metadata, nil
-}
-
-type loadedRepository struct {
-	profiles map[string]domain.ExecutionProfile
-}
-
-func (r *loadedRepository) GetProfile(ctx context.Context, id string) (*domain.ExecutionProfile, error) {
-	if err := ctx.Err(); err != nil {
-		return nil, err
-	}
-	definition, found := r.profiles[strings.TrimSpace(id)]
-	if !found {
-		return nil, ErrProfileNotFound
-	}
-	extraParams, err := jsonvalue.CopyMap(definition.ExtraParams)
-	if err != nil {
-		return nil, fmt.Errorf("copy loaded profile %q: %w", definition.ID, err)
-	}
-	definition.ExtraParams = extraParams
-	return &definition, nil
-}

internal/profile/eager_repository_test.go

@@ -1,110 +0,0 @@
-package profile
-
-import (
-	"context"
-	"errors"
-	"io/fs"
-	"reflect"
-	"testing"
-	"testing/fstest"
-)
-
-func TestLoadFSRepositoryLoadsSortedIndependentProfiles(t *testing.T) {
-	fsys := fstest.MapFS{
-		"profiles/z.yml": {Data: []byte("id: z\nbackend: local\nmodel: z-model\nextra_params:\n  nested:\n    value: one\n")},
-		"profiles/a.yml": {Data: []byte("id: a\nbackend: local\nmodel: a-model\nendpoint: ''\n")},
-	}
-
-	repository, metadata, err := LoadFSRepository(context.Background(), fsys, "profiles")
-	if err != nil {
-		t.Fatalf("load repository: %v", err)
-	}
-	if len(metadata) != 2 || metadata[0].ID != "a" || metadata[1].ID != "z" || metadata[0].Path != "a.yml" {
-		t.Fatalf("unexpected metadata: %#v", metadata)
-	}
-	if len(metadata[0].ExplicitFields) != 4 || metadata[0].ExplicitFields[0] != "backend" || metadata[0].ExplicitFields[1] != "endpoint" {
-		t.Fatalf("expected explicitly empty endpoint metadata, got %#v", metadata[0].ExplicitFields)
-	}
-	metadata[1].ExplicitFields[0] = "changed"
-	first, err := repository.GetProfile(context.Background(), "z")
-	if err != nil {
-		t.Fatalf("load profile: %v", err)
-	}
-	first.ExtraParams["nested"].(map[string]any)["value"] = "changed"
-	second, err := repository.GetProfile(context.Background(), "z")
-	if err != nil {
-		t.Fatalf("reload profile: %v", err)
-	}
-	if second.ExtraParams["nested"].(map[string]any)["value"] != "one" {
-		t.Fatalf("profile value was not defensively copied: %#v", second)
-	}
-}
-
-func TestLoadFSRepositoryRejectsInvalidProfiles(t *testing.T) {
-	tests := map[string]fstest.MapFS{
-		"duplicate IDs": {
-			"profiles/one.yml": {Data: []byte("id: duplicate\nbackend: local\nmodel: one\n")},
-			"profiles/two.yml": {Data: []byte("id: duplicate\nbackend: local\nmodel: two\n")},
-		},
-		"raw API key": {
-			"profiles/one.yml": {Data: []byte("id: one\nbackend: local\nmodel: one\napi_key: forbidden\n")},
-		},
-		"multiple documents": {
-			"profiles/one.yml": {Data: []byte("id: one\nbackend: local\nmodel: one\n---\nid: two\n")},
-		},
-	}
-	for name, fsys := range tests {
-		t.Run(name, func(t *testing.T) {
-			_, _, err := LoadFSRepository(context.Background(), fsys, "profiles")
-			if err == nil {
-				t.Fatal("expected load failure")
-			}
-		})
-	}
-}
-
-func TestLoadedRepositoryHonorsCancellationAndMissingProfiles(t *testing.T) {
-	repository, _, err := LoadFSRepository(context.Background(), fstest.MapFS{
-		"profiles/one.yml": {Data: []byte("id: one\nbackend: local\nmodel: one\n")},
-	}, "profiles")
-	if err != nil {
-		t.Fatalf("load repository: %v", err)
-	}
-	ctx, cancel := context.WithCancel(context.Background())
-	cancel()
-	if _, err := repository.GetProfile(ctx, "one"); !errors.Is(err, context.Canceled) {
-		t.Fatalf("expected cancellation, got %v", err)
-	}
-	if _, err := repository.GetProfile(context.Background(), "missing"); !errors.Is(err, ErrProfileNotFound) {
-		t.Fatalf("expected missing profile, got %v", err)
-	}
-}
-
-func TestLoadFSRepositoryMatchesPointLookupForRawProfiles(t *testing.T) {
-	fsys := fstest.MapFS{
-		"profiles/base.yml":    {Data: []byte("id: base\nbackend: local\nmodel: base-model\n")},
-		"profiles/derived.yml": {Data: []byte("id: derived\nbase_profile: base\nreasoning_effort: high\n")},
-	}
-	eager, _, err := LoadFSRepository(context.Background(), fsys, "profiles")
-	if err != nil {
-		t.Fatalf("load eager repository: %v", err)
-	}
-	pointLookup := NewFSRepository(fsys, "profiles")
-	for _, id := range []string{"base", "derived"} {
-		t.Run(id, func(t *testing.T) {
-			got, err := eager.GetProfile(context.Background(), id)
-			if err != nil {
-				t.Fatalf("load eager profile: %v", err)
-			}
-			want, err := pointLookup.GetProfile(context.Background(), id)
-			if err != nil {
-				t.Fatalf("load point-in-time profile: %v", err)
-			}
-			if !reflect.DeepEqual(got, want) {
-				t.Fatalf("raw profiles differ: got %#v, want %#v", got, want)
-			}
-		})
-	}
-}
-
-var _ fs.FS = fstest.MapFS{}

internal/profile/filesystem_repository.go

@@ -1,259 +0,0 @@
-package profile
-
-import (
-	"bytes"
-	"context"
-	"errors"
-	"fmt"
-	"io"
-	"io/fs"
-	"os"
-	"strings"
-
-	"gitea.maximumdirect.net/eric/promptkit/internal/domain"
-	"gitea.maximumdirect.net/eric/promptkit/internal/filecatalog"
-	"gitea.maximumdirect.net/eric/promptkit/internal/jsonvalue"
-	"gopkg.in/yaml.v3"
-)
-
-var (
-	ErrProfileNotFound     = errors.New("execution profile not found")
-	ErrInvalidYAML         = errors.New("invalid YAML format")
-	ErrInvalidProfile      = errors.New("invalid execution profile configuration")
-	ErrRawAPIKeyNotAllowed = errors.New("raw api_key is not allowed; use api_key_env")
-)
-
-type filesystemRepository struct {
-	dir string
-}
-
-func NewFilesystemRepository(dir string) Repository {
-	return &filesystemRepository{dir: dir}
-}
-
-func (r *filesystemRepository) GetProfile(ctx context.Context, id string) (*domain.ExecutionProfile, error) {
-	return loadProfile(ctx, os.DirFS(r.dir), ".", id)
-}
-
-type fsRepository struct {
-	fsys fs.FS
-	root string
-}
-
-func NewFSRepository(fsys fs.FS, root string) Repository {
-	return &fsRepository{fsys: fsys, root: root}
-}
-
-func (r *fsRepository) GetProfile(ctx context.Context, id string) (*domain.ExecutionProfile, error) {
-	return loadProfile(ctx, r.fsys, r.root, id)
-}
-
-type overlayRepository struct {
-	primary  Repository
-	fallback Repository
-}
-
-func NewOverlayRepository(primary, fallback Repository) Repository {
-	return &overlayRepository{primary: primary, fallback: fallback}
-}
-
-func (r *overlayRepository) GetProfile(ctx context.Context, id string) (*domain.ExecutionProfile, error) {
-	if r.primary != nil {
-		prof, err := r.primary.GetProfile(ctx, id)
-		if err == nil {
-			return prof, nil
-		}
-		if !errors.Is(err, ErrProfileNotFound) {
-			return nil, err
-		}
-	}
-	if r.fallback == nil {
-		return nil, ErrProfileNotFound
-	}
-	return r.fallback.GetProfile(ctx, id)
-}
-
-func loadProfile(ctx context.Context, fsys fs.FS, root string, id string) (*domain.ExecutionProfile, error) {
-	id = strings.TrimSpace(id)
-	if id == "" {
-		return nil, fmt.Errorf("%w: profile id is required", ErrInvalidProfile)
-	}
-	if fsys == nil {
-		return nil, fmt.Errorf("failed to read profile directory: filesystem is nil")
-	}
-
-	files, err := filecatalog.FindFSYAMLFiles(ctx, fsys, root)
-	if err != nil {
-		return nil, fmt.Errorf("failed to read profile directory: %w", err)
-	}
-
-	var matches []profileMatch
-	for _, fullPath := range files {
-		select {
-		case <-ctx.Done():
-			return nil, ctx.Err()
-		default:
-		}
-
-		relPath := filecatalog.DisplayPath(root, fullPath)
-		data, err := fs.ReadFile(fsys, fullPath)
-		if err != nil {
-			return nil, fmt.Errorf("failed to read profile file %s: %w", relPath, err)
-		}
-		metadata, metadataErr := readProfileFileMetadata(data)
-		idMatch := metadata.matchesID(id)
-		if metadataErr != nil {
-			if idMatch {
-				return nil, fmt.Errorf("%w: %s: %v", ErrInvalidYAML, relPath, metadataErr)
-			}
-			continue
-		}
-		if metadata.hasRawAPIKey {
-			if idMatch {
-				return nil, fmt.Errorf("%w: %s", ErrRawAPIKeyNotAllowed, relPath)
-			}
-			continue
-		}
-		if !idMatch {
-			continue
-		}
-
-		prof, err := decodeProfile(data)
-		if err != nil {
-			return nil, fmt.Errorf("%w: %s: %v", ErrInvalidYAML, relPath, err)
-		}
-
-		prof.ID = strings.TrimSpace(prof.ID)
-		if prof.ID != id {
-			continue
-		}
-		prof.ExtraParams, err = jsonvalue.CopyMap(prof.ExtraParams)
-		if err != nil {
-			return nil, fmt.Errorf("%w: %s: %v", ErrInvalidProfile, relPath, err)
-		}
-		if err := NormalizeAndValidateDefinition(prof); err != nil {
-			if errors.Is(err, ErrRawAPIKeyNotAllowed) {
-				return nil, fmt.Errorf("%w: %s", err, relPath)
-			}
-			return nil, fmt.Errorf("%w: %s: %v", ErrInvalidProfile, relPath, err)
-		}
-		matches = append(matches, profileMatch{
-			profile: prof,
-			path:    relPath,
-		})
-	}
-
-	if len(matches) > 1 {
-		paths := make([]string, 0, len(matches))
-		for _, match := range matches {
-			paths = append(paths, match.path)
-		}
-		return nil, fmt.Errorf("%w: duplicate execution profile id %q found in: %s", ErrInvalidProfile, id, strings.Join(paths, ", "))
-	}
-
-	if len(matches) == 1 {
-		return matches[0].profile, nil
-	}
-
-	return nil, ErrProfileNotFound
-}
-
-type profileMatch struct {
-	profile *domain.ExecutionProfile
-	path    string
-}
-
-type profileFileMetadata struct {
-	ids            []string
-	hasRawAPIKey   bool
-	explicitFields []string
-}
-
-func readProfileFileMetadata(data []byte) (profileFileMetadata, error) {
-	decoder := yaml.NewDecoder(bytes.NewReader(data))
-	var node yaml.Node
-	if err := decoder.Decode(&node); err != nil {
-		return profileFileMetadata{}, err
-	}
-	metadata := profileMetadataFromNode(&node)
-	documentCount := 1
-	for {
-		var trailing yaml.Node
-		err := decoder.Decode(&trailing)
-		if errors.Is(err, io.EOF) {
-			if documentCount == 1 {
-				return metadata, nil
-			}
-			return metadata, errors.New("profile file must contain exactly one YAML document")
-		}
-		if err != nil {
-			return metadata, err
-		}
-		documentCount++
-		metadata.merge(profileMetadataFromNode(&trailing))
-	}
-}
-
-func profileMetadataFromNode(node *yaml.Node) profileFileMetadata {
-	if node.Kind != yaml.DocumentNode || len(node.Content) == 0 {
-		return profileFileMetadata{}
-	}
-	mapping := node.Content[0]
-	if mapping.Kind != yaml.MappingNode {
-		return profileFileMetadata{}
-	}
-
-	var metadata profileFileMetadata
-	for i := 0; i+1 < len(mapping.Content); i += 2 {
-		key := mapping.Content[i]
-		value := mapping.Content[i+1]
-		metadata.explicitFields = append(metadata.explicitFields, key.Value)
-		switch key.Value {
-		case "id":
-			metadata.ids = append(metadata.ids, strings.TrimSpace(value.Value))
-		case "api_key":
-			metadata.hasRawAPIKey = true
-		}
-	}
-	return metadata
-}
-
-func (m profileFileMetadata) matchesID(id string) bool {
-	for _, candidate := range m.ids {
-		if candidate == id {
-			return true
-		}
-	}
-	return false
-}
-
-func (m *profileFileMetadata) merge(other profileFileMetadata) {
-	m.ids = append(m.ids, other.ids...)
-	m.hasRawAPIKey = m.hasRawAPIKey || other.hasRawAPIKey
-	m.explicitFields = append(m.explicitFields, other.explicitFields...)
-}
-
-func decodeProfile(data []byte) (*domain.ExecutionProfile, error) {
-	var prof domain.ExecutionProfile
-	decoder := yaml.NewDecoder(bytes.NewReader(data))
-	decoder.KnownFields(true)
-	if err := decoder.Decode(&prof); err != nil {
-		return nil, err
-	}
-	if err := requireYAMLStreamEnd(decoder); err != nil {
-		return nil, err
-	}
-	return &prof, nil
-}
-
-func requireYAMLStreamEnd(decoder *yaml.Decoder) error {
-	var trailing yaml.Node
-	err := decoder.Decode(&trailing)
-	if errors.Is(err, io.EOF) {
-		return nil
-	}
-	if err != nil {
-		return err
-	}
-	return errors.New("profile file must contain exactly one YAML document")
-}

internal/profile/memory_repository.go

@@ -1,50 +0,0 @@
-package profile
-
-import (
-	"context"
-	"fmt"
-
-	"gitea.maximumdirect.net/eric/promptkit/internal/domain"
-	"gitea.maximumdirect.net/eric/promptkit/internal/jsonvalue"
-)
-
-// NewMemoryRepository constructs an immutable repository from profile
-// definitions supplied by an internal caller.
-func NewMemoryRepository(definitions []domain.ExecutionProfile) (Repository, error) {
-	repository := &memoryRepository{profiles: make(map[string]domain.ExecutionProfile, len(definitions))}
-	for _, definition := range definitions {
-		extraParams, err := jsonvalue.CopyMap(definition.ExtraParams)
-		if err != nil {
-			return nil, err
-		}
-		definition.ExtraParams = extraParams
-		if err := NormalizeAndValidateDefinition(&definition); err != nil {
-			return nil, err
-		}
-		if _, exists := repository.profiles[definition.ID]; exists {
-			return nil, fmt.Errorf("duplicate profile id %q", definition.ID)
-		}
-		repository.profiles[definition.ID] = definition
-	}
-	return repository, nil
-}
-
-type memoryRepository struct {
-	profiles map[string]domain.ExecutionProfile
-}
-
-func (r *memoryRepository) GetProfile(_ context.Context, id string) (*domain.ExecutionProfile, error) {
-	if r == nil {
-		return nil, ErrProfileNotFound
-	}
-	definition, found := r.profiles[id]
-	if !found {
-		return nil, ErrProfileNotFound
-	}
-	extraParams, err := jsonvalue.CopyMap(definition.ExtraParams)
-	if err != nil {
-		return nil, fmt.Errorf("copy memory profile %q: %w", definition.ID, err)
-	}
-	definition.ExtraParams = extraParams
-	return &definition, nil
-}

internal/profile/memory_repository_test.go

@@ -1,91 +0,0 @@
-package profile
-
-import (
-	"context"
-	"errors"
-	"testing"
-
-	"gitea.maximumdirect.net/eric/promptkit/internal/domain"
-)
-
-func TestMemoryRepositoryOwnsNormalizedDefinitions(t *testing.T) {
-	nested := map[string]any{"value": "original"}
-	definitions := []domain.ExecutionProfile{{
-		ID:          " profile ",
-		BackendID:   " backend ",
-		Endpoint:    " https://example.test/v1/ ",
-		Model:       "model",
-		ExtraParams: map[string]any{"nested": nested},
-	}}
-
-	repository, err := NewMemoryRepository(definitions)
-	if err != nil {
-		t.Fatalf("construct repository: %v", err)
-	}
-	nested["value"] = "mutated input"
-
-	first, err := repository.GetProfile(context.Background(), "profile")
-	if err != nil {
-		t.Fatalf("load profile: %v", err)
-	}
-	if first.ID != "profile" || first.BackendID != "backend" || first.Endpoint != "https://example.test/v1/" {
-		t.Fatalf("normalized definition = %#v", first)
-	}
-	if first.ExtraParams["nested"].(map[string]any)["value"] != "original" {
-		t.Fatalf("repository retained input mutation: %#v", first.ExtraParams)
-	}
-	first.ExtraParams["nested"].(map[string]any)["value"] = "mutated result"
-
-	second, err := repository.GetProfile(context.Background(), "profile")
-	if err != nil {
-		t.Fatalf("reload profile: %v", err)
-	}
-	if second.ExtraParams["nested"].(map[string]any)["value"] != "original" {
-		t.Fatalf("repository retained result mutation: %#v", second.ExtraParams)
-	}
-}
-
-func TestMemoryRepositoryPreservesInheritanceAndRejectsInvalidDefinitions(t *testing.T) {
-	derived, err := NewMemoryRepository([]domain.ExecutionProfile{{
-		ID:              "derived",
-		BaseProfileID:   "base",
-		ReasoningEffort: "high",
-	}})
-	if err != nil {
-		t.Fatalf("construct derived repository: %v", err)
-	}
-	profile, err := derived.GetProfile(context.Background(), "derived")
-	if err != nil {
-		t.Fatalf("load derived profile: %v", err)
-	}
-	if profile.BaseProfileID != "base" || profile.ReasoningEffort != "high" {
-		t.Fatalf("derived profile = %#v", profile)
-	}
-	if _, err := derived.GetProfile(context.Background(), "missing"); !errors.Is(err, ErrProfileNotFound) {
-		t.Fatalf("missing profile error = %v, want ErrProfileNotFound", err)
-	}
-
-	tests := []struct {
-		name        string
-		definitions []domain.ExecutionProfile
-	}{
-		{
-			name: "normalized duplicate IDs",
-			definitions: []domain.ExecutionProfile{
-				{ID: " duplicate ", Endpoint: "https://one.example/v1", Model: "one"},
-				{ID: "duplicate", Endpoint: "https://two.example/v1", Model: "two"},
-			},
-		},
-		{
-			name:        "invalid extra parameters",
-			definitions: []domain.ExecutionProfile{{ID: "invalid", Endpoint: "https://example.test/v1", Model: "model", ExtraParams: map[string]any{"invalid": func() {}}}},
-		},
-	}
-	for _, test := range tests {
-		t.Run(test.name, func(t *testing.T) {
-			if _, err := NewMemoryRepository(test.definitions); err == nil {
-				t.Fatal("expected repository construction error")
-			}
-		})
-	}
-}

internal/profile/repository.go

@@ -2,11 +2,15 @@ package profile
 
 import (
 	"context"
+	"errors"
 
 	"gitea.maximumdirect.net/eric/promptkit/internal/domain"
 )
 
-// Repository loads execution profiles.
+// ErrProfileNotFound identifies an absent profile in the captured index.
+var ErrProfileNotFound = errors.New("execution profile not found")
+
+// Repository selects execution profiles from a captured index.
 type Repository interface {
 	GetProfile(ctx context.Context, id string) (*domain.ExecutionProfile, error)
 }

internal/profile/repository_benchmark_test.go

@@ -1,58 +0,0 @@
-package profile
-
-import (
-	"context"
-	"fmt"
-	"testing"
-	"testing/fstest"
-)
-
-func BenchmarkProfileRepositoryLookup(b *testing.B) {
-	for _, size := range []int{10, 1000} {
-		b.Run(fmt.Sprintf("catalog-%d", size), func(b *testing.B) {
-			files := fstest.MapFS{
-				"target.yaml": profileMapFile(`
-id: target
-endpoint: http://localhost:8000/v1
-model: target-model
-extra_params:
-  selected: true
-`),
-			}
-			metadataNames := []string{"target.yaml"}
-			for i := 1; i < size; i++ {
-				name := fmt.Sprintf("profile-%04d.yaml", i)
-				files[name] = profileMapFile(fmt.Sprintf(`
-id: profile-%04d
-endpoint: http://localhost:8000/v1
-model: unrelated-model
-temperature: 0.5
-max_tokens: 500
-extra_params:
-  provider:
-    order:
-      - first
-      - second
-`, i))
-				metadataNames = append(metadataNames, name)
-			}
-
-			fsys := &recordingProfileFS{FS: files}
-			repo := NewFSRepository(fsys, ".")
-			b.ReportAllocs()
-			b.ResetTimer()
-			for i := 0; i < b.N; i++ {
-				if _, err := repo.GetProfile(context.Background(), "target"); err != nil {
-					b.Fatal(err)
-				}
-			}
-			b.StopTimer()
-
-			for _, name := range metadataNames {
-				if got := fsys.openCount(name); got != b.N {
-					b.Fatalf("metadata %q opens = %d, want %d", name, got, b.N)
-				}
-			}
-		})
-	}
-}

internal/profile/resolving_repository.go

@@ -1,160 +0,0 @@
-package profile
-
-import (
-	"context"
-	"errors"
-	"fmt"
-	"strings"
-
-	"gitea.maximumdirect.net/eric/promptkit/internal/domain"
-	"gitea.maximumdirect.net/eric/promptkit/internal/jsonvalue"
-)
-
-const maximumProfileChainLength = 32
-
-type resolvingRepository struct {
-	source Repository
-}
-
-// NewResolvingRepository resolves inherited profile definitions from source.
-func NewResolvingRepository(source Repository) Repository {
-	return &resolvingRepository{source: source}
-}
-
-func (r *resolvingRepository) GetProfile(ctx context.Context, id string) (*domain.ExecutionProfile, error) {
-	if r == nil || r.source == nil {
-		return nil, fmt.Errorf("%w: profile repository is required", ErrInvalidProfile)
-	}
-	requestedID := strings.TrimSpace(id)
-	if requestedID == "" {
-		return nil, fmt.Errorf("%w: profile id is required", ErrInvalidProfile)
-	}
-	if err := ctx.Err(); err != nil {
-		return nil, err
-	}
-
-	profile, err := r.getRawProfile(ctx, requestedID)
-	if err != nil {
-		return nil, err
-	}
-	if profile == nil {
-		return nil, fmt.Errorf("%w: selected profile %q is nil", ErrInvalidProfile, requestedID)
-	}
-
-	chain := []*domain.ExecutionProfile{profile}
-	chainIDs := []string{requestedID}
-	visited := map[string]struct{}{requestedID: {}}
-	current := profile
-
-	for {
-		baseID := strings.TrimSpace(current.BaseProfileID)
-		if baseID == "" {
-			break
-		}
-		if err := ctx.Err(); err != nil {
-			return nil, err
-		}
-		if _, seen := visited[baseID]; seen {
-			return nil, fmt.Errorf("%w: profile inheritance cycle %s", ErrInvalidProfile, joinProfileChain(chainIDs, baseID))
-		}
-		if len(chain) >= maximumProfileChainLength {
-			return nil, fmt.Errorf("%w: profile inheritance chain exceeds %d profiles: %s", ErrInvalidProfile, maximumProfileChainLength, joinProfileChain(chainIDs, baseID))
-		}
-
-		base, err := r.getRawProfile(ctx, baseID)
-		if err != nil {
-			if errors.Is(err, ErrProfileNotFound) {
-				return nil, fmt.Errorf("%w: base profile %q is missing in chain %s", ErrInvalidProfile, baseID, joinProfileChain(chainIDs, baseID))
-			}
-			return nil, fmt.Errorf("%w: failed to load base profile %q in chain %s: %w", ErrInvalidProfile, baseID, joinProfileChain(chainIDs, baseID), err)
-		}
-		if base == nil {
-			return nil, fmt.Errorf("%w: base profile %q is nil in chain %s", ErrInvalidProfile, baseID, joinProfileChain(chainIDs, baseID))
-		}
-
-		chain = append(chain, base)
-		chainIDs = append(chainIDs, baseID)
-		visited[baseID] = struct{}{}
-		current = base
-	}
-
-	resolved, err := mergeProfileChain(chain)
-	if err != nil {
-		return nil, fmt.Errorf("%w: resolved profile chain %s: %w", ErrInvalidProfile, strings.Join(chainIDs, " -> "), err)
-	}
-	if err := validateResolvedProfile(resolved); err != nil {
-		return nil, fmt.Errorf("%w: resolved profile chain %s: %w", ErrInvalidProfile, strings.Join(chainIDs, " -> "), err)
-	}
-	return resolved, nil
-}
-
-func (r *resolvingRepository) getRawProfile(ctx context.Context, id string) (*domain.ExecutionProfile, error) {
-	profile, err := r.source.GetProfile(ctx, id)
-	if err != nil {
-		return nil, err
-	}
-	if err := ctx.Err(); err != nil {
-		return nil, err
-	}
-	return profile, nil
-}
-
-func joinProfileChain(chain []string, next string) string {
-	return strings.Join(append(append([]string(nil), chain...), next), " -> ")
-}
-
-func mergeProfileChain(chain []*domain.ExecutionProfile) (*domain.ExecutionProfile, error) {
-	resolved := &domain.ExecutionProfile{ID: chain[0].ID}
-	for index := len(chain) - 1; index >= 0; index-- {
-		definition := chain[index]
-		if strings.TrimSpace(definition.BackendID) != "" {
-			resolved.BackendID = definition.BackendID
-		}
-		if strings.TrimSpace(definition.Endpoint) != "" {
-			resolved.Endpoint = definition.Endpoint
-		}
-		if strings.TrimSpace(definition.Model) != "" {
-			resolved.Model = definition.Model
-		}
-		if definition.Temperature != 0 {
-			resolved.Temperature = definition.Temperature
-		}
-		if definition.MaxTokens != 0 {
-			resolved.MaxTokens = definition.MaxTokens
-		}
-		if definition.TopP != 0 {
-			resolved.TopP = definition.TopP
-		}
-		if definition.TimeoutSeconds != 0 {
-			resolved.TimeoutSeconds = definition.TimeoutSeconds
-		}
-		if strings.TrimSpace(definition.ServiceTier) != "" {
-			resolved.ServiceTier = definition.ServiceTier
-		}
-		if strings.TrimSpace(definition.ReasoningEffort) != "" {
-			resolved.ReasoningEffort = definition.ReasoningEffort
-		}
-		if strings.TrimSpace(definition.APIKeyEnv) != "" {
-			resolved.APIKeyEnv = definition.APIKeyEnv
-		}
-		resolved.APIKeyRequired = resolved.APIKeyRequired || definition.APIKeyRequired
-		if len(definition.ExtraParams) != 0 {
-			extraParams, err := jsonvalue.CopyMap(definition.ExtraParams)
-			if err != nil {
-				return nil, err
-			}
-			resolved.ExtraParams = extraParams
-		}
-	}
-	resolved.ID = chain[0].ID
-	resolved.BaseProfileID = ""
-	return resolved, nil
-}
-
-func validateResolvedProfile(profile *domain.ExecutionProfile) error {
-	if profile == nil {
-		return errors.New("resolved profile is required")
-	}
-	profile.BaseProfileID = ""
-	return NormalizeAndValidateDefinition(profile)
-}

internal/profile/resolving_repository_test.go

@@ -1,418 +0,0 @@
-package profile
-
-import (
-	"context"
-	"errors"
-	"fmt"
-	"io/fs"
-	"reflect"
-	"strings"
-	"sync"
-	"testing"
-	"testing/fstest"
-
-	"gitea.maximumdirect.net/eric/promptkit/internal/domain"
-)
-
-func TestResolvingRepositoryMergesProfileChain(t *testing.T) {
-	repo := &resolvingTestRepository{profiles: map[string]*domain.ExecutionProfile{
-		"leaf": {
-			ID:              "leaf",
-			BaseProfileID:   "middle",
-			BackendID:       "leaf-backend",
-			TopP:            0.8,
-			TimeoutSeconds:  45,
-			ReasoningEffort: "high",
-		},
-		"middle": {
-			ID:             "middle",
-			BaseProfileID:  "root",
-			Endpoint:       "https://middle.example/v1",
-			Model:          "middle-model",
-			MaxTokens:      256,
-			APIKeyEnv:      "MIDDLE_API_KEY",
-			APIKeyRequired: true,
-			ExtraParams:    map[string]any{"middle": map[string]any{"value": "middle"}},
-		},
-		"root": {
-			ID:          "root",
-			BackendID:   "root-backend",
-			Endpoint:    "https://root.example/v1",
-			Model:       "root-model",
-			Temperature: 0.3,
-			ServiceTier: "priority",
-			ExtraParams: map[string]any{"root": "value"},
-		},
-	}}
-
-	got, err := NewResolvingRepository(repo).GetProfile(context.Background(), "leaf")
-	if err != nil {
-		t.Fatalf("resolve profile: %v", err)
-	}
-	want := &domain.ExecutionProfile{
-		ID:              "leaf",
-		BackendID:       "leaf-backend",
-		Endpoint:        "https://middle.example/v1",
-		Model:           "middle-model",
-		Temperature:     0.3,
-		MaxTokens:       256,
-		TopP:            0.8,
-		TimeoutSeconds:  45,
-		ServiceTier:     "priority",
-		ReasoningEffort: "high",
-		APIKeyEnv:       "MIDDLE_API_KEY",
-		APIKeyRequired:  true,
-		ExtraParams:     map[string]any{"middle": map[string]any{"value": "middle"}},
-	}
-	if !reflect.DeepEqual(got, want) {
-		t.Fatalf("resolved profile:\n got %#v\nwant %#v", got, want)
-	}
-}
-
-func TestResolvingRepositoryRejectsMissingSourceAndProfileID(t *testing.T) {
-	if _, err := NewResolvingRepository(nil).GetProfile(context.Background(), "profile"); !errors.Is(err, ErrInvalidProfile) {
-		t.Fatalf("nil source error = %v, want ErrInvalidProfile", err)
-	}
-
-	repo := &resolvingTestRepository{profiles: map[string]*domain.ExecutionProfile{}}
-	if _, err := NewResolvingRepository(repo).GetProfile(context.Background(), " \t "); !errors.Is(err, ErrInvalidProfile) {
-		t.Fatalf("blank id error = %v, want ErrInvalidProfile", err)
-	}
-	if got := repo.callCount(" "); got != 0 {
-		t.Fatalf("blank id looked up source %d times", got)
-	}
-}
-
-func TestResolvingRepositoryCopiesExtraParams(t *testing.T) {
-	baseParams := map[string]any{"nested": map[string]any{"value": "base"}}
-	repo := &resolvingTestRepository{profiles: map[string]*domain.ExecutionProfile{
-		"child": {ID: "child", BaseProfileID: "base"},
-		"base": {
-			ID:          "base",
-			Endpoint:    "https://base.example/v1",
-			Model:       "model",
-			ExtraParams: baseParams,
-		},
-	}}
-	resolver := NewResolvingRepository(repo)
-
-	first, err := resolver.GetProfile(context.Background(), "child")
-	if err != nil {
-		t.Fatalf("resolve inherited map: %v", err)
-	}
-	first.ExtraParams["nested"].(map[string]any)["value"] = "mutated"
-	second, err := resolver.GetProfile(context.Background(), "child")
-	if err != nil {
-		t.Fatalf("resolve inherited map again: %v", err)
-	}
-	if got := second.ExtraParams["nested"].(map[string]any)["value"]; got != "base" {
-		t.Fatalf("later result retained mutation: %v", got)
-	}
-	if got := baseParams["nested"].(map[string]any)["value"]; got != "base" {
-		t.Fatalf("source map retained mutation: %v", got)
-	}
-
-	repo.set("child", &domain.ExecutionProfile{
-		ID:            "child",
-		BaseProfileID: "base",
-		ExtraParams:   map[string]any{"child": "replacement"},
-	})
-	replaced, err := resolver.GetProfile(context.Background(), "child")
-	if err != nil {
-		t.Fatalf("resolve replacement map: %v", err)
-	}
-	if !reflect.DeepEqual(replaced.ExtraParams, map[string]any{"child": "replacement"}) {
-		t.Fatalf("extra params = %#v, want complete child replacement", replaced.ExtraParams)
-	}
-}
-
-func TestResolvingRepositoryUsesRawOverlayForEachLookup(t *testing.T) {
-	leafSource := NewFSRepository(profileTestFS(map[string]string{
-		"leaf.yaml": "id: leaf\nbase_profile: base\n",
-	}), ".")
-	fallback := NewFSRepository(profileTestFS(map[string]string{
-		"base.yaml": "id: base\nendpoint: https://fallback.example/v1\nmodel: fallback-model\n",
-	}), ".")
-	overlay := NewOverlayRepository(leafSource, fallback)
-	resolver := NewResolvingRepository(overlay)
-
-	got, err := resolver.GetProfile(context.Background(), "leaf")
-	if err != nil {
-		t.Fatalf("resolve fallback base: %v", err)
-	}
-	if got.Model != "fallback-model" {
-		t.Fatalf("fallback base model = %q", got.Model)
-	}
-
-	shadowing := NewOverlayRepository(NewFSRepository(profileTestFS(map[string]string{
-		"leaf.yaml": "id: leaf\nbase_profile: base\n",
-		"base.yaml": "id: base\nendpoint: https://primary.example/v1\nmodel: primary-model\n",
-	}), "."), fallback)
-	got, err = NewResolvingRepository(shadowing).GetProfile(context.Background(), "leaf")
-	if err != nil {
-		t.Fatalf("resolve shadowed base: %v", err)
-	}
-	if got.Model != "primary-model" || got.Endpoint != "https://primary.example/v1" {
-		t.Fatalf("shadowed base = %+v", got)
-	}
-}
-
-func TestResolvingRepositoryReportsSafetyAndSourceErrors(t *testing.T) {
-	sourceErr := errors.New("source failure")
-	tests := []struct {
-		name     string
-		repo     *resolvingTestRepository
-		id       string
-		want     []error
-		wantNot  error
-		contains []string
-	}{
-		{
-			name:    "missing selected profile preserves not found",
-			repo:    &resolvingTestRepository{profiles: map[string]*domain.ExecutionProfile{}},
-			id:      "missing",
-			want:    []error{ErrProfileNotFound},
-			wantNot: ErrInvalidProfile,
-		},
-		{
-			name: "missing base is invalid but not not found",
-			repo: &resolvingTestRepository{profiles: map[string]*domain.ExecutionProfile{
-				"leaf": {ID: "leaf", BaseProfileID: "missing"},
-			}},
-			id:       "leaf",
-			want:     []error{ErrInvalidProfile},
-			wantNot:  ErrProfileNotFound,
-			contains: []string{"missing", "leaf -> missing"},
-		},
-		{
-			name: "direct cycle",
-			repo: &resolvingTestRepository{profiles: map[string]*domain.ExecutionProfile{
-				"a": {ID: "a", BaseProfileID: "a"},
-			}},
-			id:       "a",
-			want:     []error{ErrInvalidProfile},
-			contains: []string{"a -> a"},
-		},
-		{
-			name: "indirect cycle",
-			repo: &resolvingTestRepository{profiles: map[string]*domain.ExecutionProfile{
-				"a": {ID: "a", BaseProfileID: "b"},
-				"b": {ID: "b", BaseProfileID: "c"},
-				"c": {ID: "c", BaseProfileID: "a"},
-			}},
-			id:       "a",
-			want:     []error{ErrInvalidProfile},
-			contains: []string{"a -> b -> c -> a"},
-		},
-		{
-			name: "nil result",
-			repo: &resolvingTestRepository{profiles: map[string]*domain.ExecutionProfile{
-				"leaf": nil,
-			}},
-			id:   "leaf",
-			want: []error{ErrInvalidProfile},
-		},
-		{
-			name: "incomplete resolved profile",
-			repo: &resolvingTestRepository{profiles: map[string]*domain.ExecutionProfile{
-				"leaf": {ID: "leaf", BaseProfileID: "base"},
-				"base": {ID: "base", Model: "model"},
-			}},
-			id:   "leaf",
-			want: []error{ErrInvalidProfile},
-		},
-		{
-			name: "base source error is retained",
-			repo: &resolvingTestRepository{
-				profiles: map[string]*domain.ExecutionProfile{"leaf": {ID: "leaf", BaseProfileID: "base"}},
-				errors:   map[string]error{"base": sourceErr},
-			},
-			id:   "leaf",
-			want: []error{ErrInvalidProfile, sourceErr},
-		},
-	}
-
-	for _, tc := range tests {
-		t.Run(tc.name, func(t *testing.T) {
-			_, err := NewResolvingRepository(tc.repo).GetProfile(context.Background(), tc.id)
-			for _, want := range tc.want {
-				if !errors.Is(err, want) {
-					t.Fatalf("error = %v, want %v", err, want)
-				}
-			}
-			if tc.wantNot != nil && errors.Is(err, tc.wantNot) {
-				t.Fatalf("error = %v, must not match %v", err, tc.wantNot)
-			}
-			for _, fragment := range tc.contains {
-				if !strings.Contains(err.Error(), fragment) {
-					t.Fatalf("error = %v, want %q", err, fragment)
-				}
-			}
-		})
-	}
-}
-
-func TestResolvingRepositoryEnforcesChainLength(t *testing.T) {
-	for _, count := range []int{maximumProfileChainLength, maximumProfileChainLength + 1} {
-		t.Run(fmt.Sprintf("%d profiles", count), func(t *testing.T) {
-			profiles := make(map[string]*domain.ExecutionProfile, count)
-			for index := 1; index <= count; index++ {
-				id := fmt.Sprintf("profile-%d", index)
-				definition := &domain.ExecutionProfile{ID: id}
-				if index == count {
-					definition.Endpoint = "https://root.example/v1"
-					definition.Model = "model"
-				} else {
-					definition.BaseProfileID = fmt.Sprintf("profile-%d", index+1)
-				}
-				profiles[id] = definition
-			}
-
-			got, err := NewResolvingRepository(&resolvingTestRepository{profiles: profiles}).GetProfile(context.Background(), "profile-1")
-			if count == maximumProfileChainLength {
-				if err != nil || got == nil {
-					t.Fatalf("profile = %+v, error = %v, want accepted chain", got, err)
-				}
-				return
-			}
-			if !errors.Is(err, ErrInvalidProfile) {
-				t.Fatalf("error = %v, want ErrInvalidProfile", err)
-			}
-		})
-	}
-}
-
-func TestResolvingRepositoryIsFreshAndCancellationAware(t *testing.T) {
-	repo := &resolvingTestRepository{profiles: map[string]*domain.ExecutionProfile{
-		"leaf": {ID: "leaf", BaseProfileID: "base"},
-		"base": {ID: "base", Endpoint: "https://base.example/v1", Model: "first", ExtraParams: map[string]any{"nested": map[string]any{"value": "first"}}},
-	}}
-	resolver := NewResolvingRepository(repo)
-
-	first, err := resolver.GetProfile(context.Background(), "leaf")
-	if err != nil || first.Model != "first" {
-		t.Fatalf("first result=(%+v, %v)", first, err)
-	}
-	repo.set("base", &domain.ExecutionProfile{ID: "base", Endpoint: "https://base.example/v1", Model: "second", ExtraParams: map[string]any{"nested": map[string]any{"value": "second"}}})
-	second, err := resolver.GetProfile(context.Background(), "leaf")
-	if err != nil || second.Model != "second" {
-		t.Fatalf("second result=(%+v, %v)", second, err)
-	}
-
-	canceled, cancel := context.WithCancel(context.Background())
-	cancel()
-	if _, err := resolver.GetProfile(canceled, "leaf"); !errors.Is(err, context.Canceled) {
-		t.Fatalf("canceled lookup error = %v", err)
-	}
-	if got := repo.callCount("leaf"); got != 2 {
-		t.Fatalf("calls after canceled lookup = %d, want 2", got)
-	}
-
-	duringTraversal, cancelDuringTraversal := context.WithCancel(context.Background())
-	repo.afterGet = func(id string) {
-		if id == "leaf" {
-			cancelDuringTraversal()
-		}
-	}
-	if _, err := resolver.GetProfile(duringTraversal, "leaf"); !errors.Is(err, context.Canceled) {
-		t.Fatalf("during traversal error = %v", err)
-	}
-	if got := repo.callCount("base"); got != 2 {
-		t.Fatalf("base calls after cancellation = %d, want 2", got)
-	}
-
-	terminalLookup, cancelTerminalLookup := context.WithCancel(context.Background())
-	repo.afterGet = func(id string) {
-		if id == "base" {
-			cancelTerminalLookup()
-		}
-	}
-	if _, err := resolver.GetProfile(terminalLookup, "leaf"); !errors.Is(err, context.Canceled) {
-		t.Fatalf("terminal lookup cancellation error = %v", err)
-	}
-	if got := repo.callCount("base"); got != 3 {
-		t.Fatalf("base calls after terminal cancellation = %d, want 3", got)
-	}
-
-	repo.afterGet = nil
-	var wg sync.WaitGroup
-	errors := make(chan error, 8)
-	for index := 0; index < cap(errors); index++ {
-		wg.Add(1)
-		go func() {
-			defer wg.Done()
-			resolved, err := resolver.GetProfile(context.Background(), "leaf")
-			if err != nil {
-				errors <- err
-				return
-			}
-			resolved.ExtraParams["nested"].(map[string]any)["value"] = "mutated"
-		}()
-	}
-	wg.Wait()
-	close(errors)
-	for err := range errors {
-		t.Errorf("concurrent resolution: %v", err)
-	}
-	latest, err := resolver.GetProfile(context.Background(), "leaf")
-	if err != nil || latest.ExtraParams["nested"].(map[string]any)["value"] != "second" {
-		t.Fatalf("latest result=(%+v, %v)", latest, err)
-	}
-}
-
-type resolvingTestRepository struct {
-	mu       sync.Mutex
-	profiles map[string]*domain.ExecutionProfile
-	errors   map[string]error
-	calls    map[string]int
-	afterGet func(string)
-}
-
-func (r *resolvingTestRepository) GetProfile(ctx context.Context, id string) (*domain.ExecutionProfile, error) {
-	if err := ctx.Err(); err != nil {
-		return nil, err
-	}
-	r.mu.Lock()
-	if r.calls == nil {
-		r.calls = make(map[string]int)
-	}
-	r.calls[id]++
-	err := r.errors[id]
-	profile := r.profiles[id]
-	afterGet := r.afterGet
-	r.mu.Unlock()
-	if afterGet != nil {
-		afterGet(id)
-	}
-	if err != nil {
-		return nil, err
-	}
-	if profile == nil {
-		if _, exists := r.profiles[id]; exists {
-			return nil, nil
-		}
-		return nil, ErrProfileNotFound
-	}
-	copy := *profile
-	return &copy, nil
-}
-
-func (r *resolvingTestRepository) set(id string, profile *domain.ExecutionProfile) {
-	r.mu.Lock()
-	defer r.mu.Unlock()
-	r.profiles[id] = profile
-}
-
-func (r *resolvingTestRepository) callCount(id string) int {
-	r.mu.Lock()
-	defer r.mu.Unlock()
-	return r.calls[id]
-}
-
-func profileTestFS(files map[string]string) fs.FS {
-	fsys := make(fstest.MapFS, len(files))
-	for name, content := range files {
-		fsys[name] = profileMapFile(content)
-	}
-	return fsys
-}

internal/profile/testdata/invalid_yaml.yaml

@@ -1,3 +0,0 @@
-id: invalid_yaml
-endpoint: http://localhost:8000/v1
-model: [broken

internal/profile/testdata/missing_endpoint.yaml

@@ -1,2 +0,0 @@
-id: missing-endpoint
-model: gpt-4o-mini

internal/profile/testdata/missing_id.yaml

@@ -1,2 +0,0 @@
-endpoint: http://localhost:8000/v1
-model: gpt-4o-mini

internal/profile/testdata/missing_model.yaml

@@ -1,2 +0,0 @@
-id: missing-model
-endpoint: http://localhost:8000/v1

internal/profile/testdata/raw_api_key.yaml

@@ -1,4 +0,0 @@
-id: raw-api-key
-endpoint: http://localhost:8000/v1
-model: gpt-4o-mini
-api_key: super-secret-should-not-be-here

internal/profile/testdata/unknown_field.yaml

@@ -1,4 +0,0 @@
-id: unknown-field
-endpoint: http://localhost:8000/v1
-model: gpt-4o-mini
-foo: bar

internal/profile/testdata/valid_local_profile.yaml

@@ -1,7 +0,0 @@
-id: local-default
-endpoint: http://localhost:8000/v1
-model: gpt-4o-mini
-temperature: 0.2
-max_tokens: 700
-top_p: 1.0
-timeout_seconds: 120

internal/profile/testdata/valid_with_api_key_env.yaml

@@ -1,8 +0,0 @@
-id: local-secure
-endpoint: http://localhost:8000/v1
-model: gpt-4o-mini
-api_key_env: PROMPTKIT_API_KEY
-service_tier: priority
-reasoning_effort: medium
-extra_params:
-  provider: local

internal/prompt/go_renderer.go

@@ -21,12 +21,20 @@ var (
 
 const artifactTextChunkSize = 64 * 1024
 
-type goRenderer struct{}
+type goRenderer struct {
+	templates TemplateLookup
+}
 
 func NewGoRenderer() Renderer {
 	return &goRenderer{}
 }
 
+// NewCompiledRenderer renders definitions using templates captured with the
+// configuration snapshot. Per-call clones bind request-specific input helpers.
+func NewCompiledRenderer(templates TemplateLookup) Renderer {
+	return &goRenderer{templates: templates}
+}
+
 func (r *goRenderer) Render(ctx context.Context, definition *domain.PromptDefinition, inputs map[string]*domain.Artifact, vars map[string]string) (*domain.RenderedPrompt, error) {
 	if err := ctx.Err(); err != nil {
 		return nil, err
@@ -49,11 +57,30 @@ func (r *goRenderer) Render(ctx context.Context, definition *domain.PromptDefini
 	funcs := template.FuncMap{
 		"input": resolver.resolve,
 	}
+	var compiled CompiledTemplates
+	if r.templates != nil {
+		var found bool
+		compiled, found = r.templates.GetCompiledTemplates(definition.ID, definition.Version)
+		if !found || len(compiled.Messages) != len(definition.Templates) {
+			return nil, fmt.Errorf("%w: captured templates are unavailable", ErrRenderFailure)
+		}
+	}
 
 	if err := ctx.Err(); err != nil {
 		return nil, err
 	}
-	sessionID, err := renderSessionID(ctx, definition.SessionID, funcs, vars)
+	var sessionID string
+	var err error
+	if r.templates != nil {
+		if definition.SessionID != "" {
+			if compiled.Session == nil {
+				return nil, fmt.Errorf("%w: captured session template is unavailable", ErrRenderFailure)
+			}
+			sessionID, err = renderCompiledSessionID(ctx, compiled.Session, funcs, vars)
+		}
+	} else {
+		sessionID, err = renderSessionID(ctx, definition.SessionID, funcs, vars)
+	}
 	if err != nil {
 		return nil, err
 	}
@@ -76,7 +103,19 @@ func (r *goRenderer) Render(ctx context.Context, definition *domain.PromptDefini
 		if err := ctx.Err(); err != nil {
 			return nil, err
 		}
-		tmpl, parseErr := template.New(fmt.Sprintf("msg_%d", i)).Funcs(funcs).Option("missingkey=error").Parse(tmplMsg.Content)
+		var tmpl *template.Template
+		var parseErr error
+		if r.templates != nil {
+			if compiled.Messages[i] == nil {
+				return nil, fmt.Errorf("%w: captured message template is unavailable", ErrRenderFailure)
+			}
+			tmpl, parseErr = compiled.Messages[i].Clone()
+			if parseErr == nil {
+				tmpl.Funcs(funcs)
+			}
+		} else {
+			tmpl, parseErr = parseTemplate(fmt.Sprintf("msg_%d", i), tmplMsg.Content, funcs)
+		}
 		if err := ctx.Err(); err != nil {
 			return nil, err
 		}
@@ -167,14 +206,32 @@ func renderSessionID(ctx context.Context, raw string, funcs template.FuncMap, va
 	if err := ctx.Err(); err != nil {
 		return "", err
 	}
-	tmpl, parseErr := template.New("session_id").Funcs(funcs).Option("missingkey=error").Parse(raw)
+	tmpl, parseErr := parseTemplate("session_id", raw, funcs)
 	if err := ctx.Err(); err != nil {
 		return "", err
 	}
 	if parseErr != nil {
 		return "", fmt.Errorf("%w: session_id: %v", ErrInvalidTemplate, parseErr)
 	}
+	return executeSessionTemplate(ctx, tmpl, vars)
+}
 
+func renderCompiledSessionID(ctx context.Context, compiled *template.Template, funcs template.FuncMap, vars map[string]string) (string, error) {
+	if err := ctx.Err(); err != nil {
+		return "", err
+	}
+	tmpl, err := compiled.Clone()
+	if err := ctx.Err(); err != nil {
+		return "", err
+	}
+	if err != nil {
+		return "", fmt.Errorf("%w: session_id: %v", ErrRenderFailure, err)
+	}
+	tmpl.Funcs(funcs)
+	return executeSessionTemplate(ctx, tmpl, vars)
+}
+
+func executeSessionTemplate(ctx context.Context, tmpl *template.Template, vars map[string]string) (string, error) {
 	if err := ctx.Err(); err != nil {
 		return "", err
 	}

internal/prompt/template.go

@@ -0,0 +1,27 @@
+package prompt
+
+import "text/template"
+
+// CompiledTemplates is the immutable parsed template set for one captured
+// prompt. Callers must not mutate its templates after handing it to a renderer.
+type CompiledTemplates struct {
+	Session  *template.Template
+	Messages []*template.Template
+}
+
+// TemplateLookup provides parsed templates for a captured prompt identity.
+type TemplateLookup interface {
+	GetCompiledTemplates(id, version string) (CompiledTemplates, bool)
+}
+
+// CompileTemplate checks static syntax with the same grammar and function
+// names as rendering, without evaluating request inputs or variables.
+func CompileTemplate(name, raw string) (*template.Template, error) {
+	return parseTemplate(name, raw, template.FuncMap{
+		"input": func(string) (string, error) { return "", nil },
+	})
+}
+
+func parseTemplate(name, raw string, funcs template.FuncMap) (*template.Template, error) {
+	return template.New(name).Funcs(funcs).Option("missingkey=error").Parse(raw)
+}

internal/promptdef/content_source.go

@@ -1,98 +0,0 @@
-package promptdef
-
-import (
-	"fmt"
-	"io/fs"
-	"os"
-	"path"
-	"path/filepath"
-	"strings"
-
-	"gitea.maximumdirect.net/eric/promptkit/internal/filecatalog"
-)
-
-type contentSourceRoot interface {
-	readContentFile(sourcePath string, contentFile string) (string, string, error)
-}
-
-type osContentSourceRoot struct {
-	root                string
-	sourcePathsRelative bool
-}
-
-func (r osContentSourceRoot) readContentFile(sourcePath string, contentFile string) (string, string, error) {
-	if strings.TrimSpace(contentFile) == "" {
-		return "", "", fmt.Errorf("path is required")
-	}
-	if filepath.IsAbs(contentFile) {
-		return "", "", fmt.Errorf("path %q must be relative", contentFile)
-	}
-
-	root, err := filepath.Abs(r.root)
-	if err != nil {
-		return "", "", fmt.Errorf("resolve source root %q: %w", r.root, err)
-	}
-	canonicalRoot, err := filepath.EvalSymlinks(root)
-	if err != nil {
-		return "", "", fmt.Errorf("resolve source root %q: %w", r.root, err)
-	}
-
-	promptPath := sourcePath
-	if r.sourcePathsRelative && !filepath.IsAbs(promptPath) {
-		promptPath = filepath.Join(root, filepath.FromSlash(promptPath))
-	} else {
-		promptPath, err = filepath.Abs(promptPath)
-		if err != nil {
-			return "", "", fmt.Errorf("resolve prompt source %q: %w", sourcePath, err)
-		}
-	}
-	resolvedPath := filepath.Clean(filepath.Join(filepath.Dir(promptPath), contentFile))
-	if !containsOSPath(root, resolvedPath) {
-		return "", "", fmt.Errorf("path %q escapes source root %q", contentFile, r.root)
-	}
-
-	canonicalPath, err := filepath.EvalSymlinks(resolvedPath)
-	if err != nil {
-		return "", "", err
-	}
-	if !containsOSPath(canonicalRoot, canonicalPath) {
-		return "", "", fmt.Errorf("path %q escapes source root %q", contentFile, r.root)
-	}
-
-	body, err := os.ReadFile(canonicalPath)
-	if err != nil {
-		return "", "", err
-	}
-	return string(body), resolvedPath, nil
-}
-
-type fsContentSourceRoot struct {
-	fsys fs.FS
-	root string
-}
-
-func (r fsContentSourceRoot) readContentFile(sourcePath string, contentFile string) (string, string, error) {
-	root := filecatalog.CleanFSRoot(r.root)
-	cleanSourcePath := path.Clean(sourcePath)
-	if cleanSourcePath == root {
-		root = path.Dir(root)
-	}
-
-	resolvedPath, _, err := filecatalog.ResolveFSPath(root, path.Dir(cleanSourcePath), contentFile)
-	if err != nil {
-		return "", "", err
-	}
-	body, err := fs.ReadFile(r.fsys, resolvedPath)
-	if err != nil {
-		return "", "", err
-	}
-	return string(body), resolvedPath, nil
-}
-
-func containsOSPath(root string, name string) bool {
-	relative, err := filepath.Rel(root, name)
-	if err != nil || filepath.IsAbs(relative) {
-		return false
-	}
-	return relative != ".." && !strings.HasPrefix(relative, ".."+string(filepath.Separator))
-}

internal/promptdef/filesystem_repository.go

@@ -1,328 +0,0 @@
-package promptdef
-
-import (
-	"bytes"
-	"context"
-	"errors"
-	"fmt"
-	"io"
-	"io/fs"
-	"strings"
-
-	"gitea.maximumdirect.net/eric/promptkit/internal/domain"
-	"gopkg.in/yaml.v3"
-)
-
-var (
-	ErrPromptDefinitionNotFound = errors.New("prompt definition not found")
-	ErrInvalidYAML              = errors.New("invalid YAML format")
-	ErrInvalidPromptDefinition  = errors.New("invalid prompt definition configuration")
-)
-
-type sourceRepository struct {
-	source promptDefinitionSource
-}
-
-type promptDefinitionFile struct {
-	ID             string                   `yaml:"id"`
-	Version        string                   `yaml:"version"`
-	DefaultProfile *string                  `yaml:"default_profile"`
-	Description    string                   `yaml:"description"`
-	SessionID      string                   `yaml:"session_id"`
-	Inputs         []promptInputFile        `yaml:"inputs"`
-	Messages       []promptMessageFile      `yaml:"messages"`
-	Output         promptOutputContractFile `yaml:"output"`
-}
-
-type promptInputFile struct {
-	Name        string `yaml:"name"`
-	Required    bool   `yaml:"required"`
-	ContentType string `yaml:"content_type"`
-	Description string `yaml:"description"`
-}
-
-type promptMessageFile struct {
-	Role         string            `yaml:"role"`
-	Content      string            `yaml:"content"`
-	ContentFile  string            `yaml:"content_file"`
-	CacheControl *cacheControlFile `yaml:"cache_control"`
-}
-
-type cacheControlFile struct {
-	Type string `yaml:"type"`
-	TTL  string `yaml:"ttl"`
-}
-
-type promptOutputContractFile struct {
-	Format         domain.OutputFormat   `yaml:"format"`
-	ValidationMode domain.ValidationMode `yaml:"validation_mode"`
-	SchemaPath     string                `yaml:"schema_path"`
-	RepairAttempts int                   `yaml:"repair_attempts"`
-}
-
-func NewFilesystemRepository(dir string) Repository {
-	return &sourceRepository{
-		source: osPromptSource{
-			root:        dir,
-			contentRoot: osContentSourceRoot{root: dir},
-		},
-	}
-}
-
-func NewFSRepository(fsys fs.FS, root string) Repository {
-	return &sourceRepository{
-		source: fsPromptSource{
-			fsys:        fsys,
-			root:        root,
-			contentRoot: fsContentSourceRoot{fsys: fsys, root: root},
-		},
-	}
-}
-
-// NewFileRepository constructs a repository for one operating-system prompt file.
-func NewFileRepository(fsys fs.FS, file string, sourceDir string) Repository {
-	return &sourceRepository{
-		source: fsPromptSource{
-			fsys: fsys,
-			root: file,
-			contentRoot: osContentSourceRoot{
-				root:                sourceDir,
-				sourcePathsRelative: true,
-			},
-		},
-	}
-}
-
-func (r *sourceRepository) GetPromptDefinition(ctx context.Context, id string, version string) (*domain.PromptDefinition, error) {
-	if strings.TrimSpace(id) == "" {
-		return nil, fmt.Errorf("%w: prompt id is required", ErrInvalidPromptDefinition)
-	}
-	if r == nil || r.source == nil {
-		return nil, errors.New("failed to read prompt definition directory: source is nil")
-	}
-
-	files, err := r.source.findYAMLFiles(ctx)
-	if err != nil {
-		return nil, fmt.Errorf("failed to read prompt definition directory: %w", err)
-	}
-
-	var matches []promptDefinitionMatch
-	for _, fullPath := range files {
-		select {
-		case <-ctx.Done():
-			return nil, ctx.Err()
-		default:
-		}
-
-		relPath := r.source.displayPath(fullPath)
-		data, err := r.source.readDefinition(fullPath)
-		if err != nil {
-			return nil, fmt.Errorf("failed to read prompt definition file %s: %w", relPath, err)
-		}
-		raw, err := decodePromptDefinition(data)
-		if err != nil {
-			if promptDefinitionDataMatches(data, id, version) {
-				return nil, fmt.Errorf("%w: %s: %v", ErrInvalidYAML, relPath, err)
-			}
-			continue
-		}
-		if !promptDefinitionMatches(raw, id, version) {
-			continue
-		}
-		matches = append(matches, promptDefinitionMatch{
-			raw:        raw,
-			sourcePath: fullPath,
-			path:       relPath,
-		})
-	}
-
-	if len(matches) > 1 {
-		paths := make([]string, 0, len(matches))
-		for _, match := range matches {
-			paths = append(paths, match.path)
-		}
-		if version != "" {
-			return nil, fmt.Errorf("%w: duplicate prompt definition id %q version %q found in: %s", ErrInvalidPromptDefinition, id, version, strings.Join(paths, ", "))
-		}
-		return nil, fmt.Errorf("%w: duplicate prompt definition id %q found in: %s", ErrInvalidPromptDefinition, id, strings.Join(paths, ", "))
-	}
-
-	if len(matches) == 1 {
-		match := matches[0]
-		def, err := normalizePromptDefinition(match.raw, r.source, match.sourcePath)
-		if err != nil {
-			return nil, fmt.Errorf("%w: %s: %v", ErrInvalidPromptDefinition, match.path, err)
-		}
-		return def, nil
-	}
-
-	return nil, ErrPromptDefinitionNotFound
-}
-
-type promptDefinitionMatch struct {
-	raw        *promptDefinitionFile
-	sourcePath string
-	path       string
-}
-
-func decodePromptDefinition(data []byte) (*promptDefinitionFile, error) {
-	var raw promptDefinitionFile
-	decoder := yaml.NewDecoder(bytes.NewReader(data))
-	decoder.KnownFields(true)
-	if err := decoder.Decode(&raw); err != nil {
-		return nil, err
-	}
-	var additional yaml.Node
-	if err := decoder.Decode(&additional); err != io.EOF {
-		if err != nil {
-			return nil, err
-		}
-		return nil, errors.New("prompt definition file must contain exactly one YAML document")
-	}
-	return &raw, nil
-}
-
-func promptDefinitionDataMatches(data []byte, id string, version string) bool {
-	var raw struct {
-		ID      string `yaml:"id"`
-		Version string `yaml:"version"`
-	}
-	if err := yaml.NewDecoder(bytes.NewReader(data)).Decode(&raw); err != nil {
-		return false
-	}
-	return promptSelectorMatches(raw.ID, raw.Version, id, version)
-}
-
-func promptDefinitionMatches(raw *promptDefinitionFile, id string, version string) bool {
-	if raw == nil {
-		return false
-	}
-	return promptSelectorMatches(raw.ID, raw.Version, id, version)
-}
-
-func promptSelectorMatches(rawID string, rawVersion string, id string, version string) bool {
-	if strings.TrimSpace(rawID) != id {
-		return false
-	}
-	return version == "" || strings.TrimSpace(rawVersion) == version
-}
-
-func normalizePromptDefinition(raw *promptDefinitionFile, sourceRoot contentSourceRoot, sourcePath string) (*domain.PromptDefinition, error) {
-	return normalizePromptDefinitionWithContent(raw, func(contentFile string) (string, string, error) {
-		return sourceRoot.readContentFile(sourcePath, contentFile)
-	})
-}
-
-func normalizePromptDefinitionWithContent(raw *promptDefinitionFile, readContentFile func(string) (string, string, error)) (*domain.PromptDefinition, error) {
-	if raw == nil {
-		return nil, errors.New("prompt definition is nil")
-	}
-
-	id := strings.TrimSpace(raw.ID)
-	if id == "" {
-		return nil, errors.New("id is required")
-	}
-
-	version := strings.TrimSpace(raw.Version)
-	if version == "" {
-		return nil, errors.New("version is required")
-	}
-
-	if len(raw.Messages) == 0 {
-		return nil, errors.New("at least one message is required")
-	}
-
-	inputs := make([]domain.PromptInput, 0, len(raw.Inputs))
-	seenInputNames := make(map[string]struct{}, len(raw.Inputs))
-	for i, in := range raw.Inputs {
-		name := strings.TrimSpace(in.Name)
-		if name == "" {
-			return nil, fmt.Errorf("input %d has empty name", i)
-		}
-		if _, exists := seenInputNames[name]; exists {
-			return nil, fmt.Errorf("duplicate input name %q", name)
-		}
-		seenInputNames[name] = struct{}{}
-
-		inputs = append(inputs, domain.PromptInput{
-			Name:        name,
-			Required:    in.Required,
-			ContentType: strings.TrimSpace(in.ContentType),
-			Description: strings.TrimSpace(in.Description),
-		})
-	}
-
-	templates := make([]domain.PromptMessageTemplate, 0, len(raw.Messages))
-	for i, msg := range raw.Messages {
-		role, err := domain.NormalizeMessageRole(msg.Role)
-		if err != nil {
-			return nil, fmt.Errorf("message %d role: %w", i, err)
-		}
-
-		hasContent := strings.TrimSpace(msg.Content) != ""
-		hasContentFile := strings.TrimSpace(msg.ContentFile) != ""
-		if hasContent == hasContentFile {
-			return nil, fmt.Errorf("message %d must set exactly one of content or content_file", i)
-		}
-
-		var rawCacheControl *domain.CacheControl
-		if msg.CacheControl != nil {
-			rawCacheControl = &domain.CacheControl{
-				Type: domain.CacheControlType(msg.CacheControl.Type),
-				TTL:  msg.CacheControl.TTL,
-			}
-		}
-		cacheControl, err := domain.NormalizeCacheControl(rawCacheControl)
-		if err != nil {
-			return nil, fmt.Errorf("message %d cache_control: %w", i, err)
-		}
-
-		templateContent := msg.Content
-		resolvedContentFile := ""
-		if hasContentFile {
-			body, resolvedPath, err := readContentFile(msg.ContentFile)
-			if err != nil {
-				return nil, fmt.Errorf("prompt %q message %d: failed to read content_file %q: %w", id, i, msg.ContentFile, err)
-			}
-			templateContent = body
-			resolvedContentFile = resolvedPath
-		}
-
-		templates = append(templates, domain.PromptMessageTemplate{
-			Role:         role,
-			Content:      templateContent,
-			ContentFile:  resolvedContentFile,
-			CacheControl: cacheControl,
-		})
-	}
-
-	outputContract := domain.OutputContract{
-		Format:         raw.Output.Format,
-		ValidationMode: raw.Output.ValidationMode,
-		SchemaPath:     strings.TrimSpace(raw.Output.SchemaPath),
-		RepairAttempts: raw.Output.RepairAttempts,
-	}
-	if err := domain.ValidateOutputContract(outputContract); err != nil {
-		return nil, fmt.Errorf("output: %w", err)
-	}
-
-	defaultProfile := ""
-	if raw.DefaultProfile != nil {
-		defaultProfile = strings.TrimSpace(*raw.DefaultProfile)
-		if defaultProfile == "" {
-			return nil, errors.New("default_profile must be a non-empty string when set")
-		}
-	}
-
-	return &domain.PromptDefinition{
-		ID:             id,
-		Version:        version,
-		DefaultProfile: defaultProfile,
-		Description:    strings.TrimSpace(raw.Description),
-		SessionID:      strings.TrimSpace(raw.SessionID),
-		Inputs:         inputs,
-		Templates:      templates,
-		OutputFormat:   raw.Output.Format,
-		Validation:     outputContract,
-	}, nil
-}

internal/promptdef/hash.go

@@ -0,0 +1,19 @@
+package promptdef
+
+import (
+	"crypto/sha256"
+	"encoding/hex"
+	"encoding/json"
+
+	"gitea.maximumdirect.net/eric/promptkit/internal/domain"
+)
+
+// HashDefinition hashes an execution-ready prompt, including captured content.
+func HashDefinition(definition *domain.PromptDefinition) (string, error) {
+	bytes, err := json.Marshal(definition)
+	if err != nil {
+		return "", err
+	}
+	sum := sha256.Sum256(bytes)
+	return hex.EncodeToString(sum[:]), nil
+}

internal/promptdef/repository.go

@@ -2,11 +2,15 @@ package promptdef
 
 import (
 	"context"
+	"errors"
 
 	"gitea.maximumdirect.net/eric/promptkit/internal/domain"
 )
 
-// Repository loads prompt definitions.
+// ErrPromptDefinitionNotFound identifies an absent captured prompt definition.
+var ErrPromptDefinitionNotFound = errors.New("prompt definition not found")
+
+// Repository selects prompt definitions from a captured index.
 type Repository interface {
 	GetPromptDefinition(ctx context.Context, id string, version string) (*domain.PromptDefinition, error)
 }

internal/promptdef/source.go

@@ -1,63 +0,0 @@
-package promptdef
-
-import (
-	"context"
-	"errors"
-	"io/fs"
-	"os"
-
-	"gitea.maximumdirect.net/eric/promptkit/internal/filecatalog"
-)
-
-type promptDefinitionSource interface {
-	contentSourceRoot
-	findYAMLFiles(context.Context) ([]string, error)
-	readDefinition(string) ([]byte, error)
-	displayPath(string) string
-}
-
-type osPromptSource struct {
-	root        string
-	contentRoot osContentSourceRoot
-}
-
-func (s osPromptSource) findYAMLFiles(ctx context.Context) ([]string, error) {
-	return filecatalog.FindYAMLFiles(ctx, s.root)
-}
-
-func (s osPromptSource) readDefinition(name string) ([]byte, error) {
-	return os.ReadFile(name)
-}
-
-func (s osPromptSource) displayPath(name string) string {
-	return filecatalog.RelativePath(s.root, name)
-}
-
-func (s osPromptSource) readContentFile(sourcePath string, contentFile string) (string, string, error) {
-	return s.contentRoot.readContentFile(sourcePath, contentFile)
-}
-
-type fsPromptSource struct {
-	fsys        fs.FS
-	root        string
-	contentRoot contentSourceRoot
-}
-
-func (s fsPromptSource) findYAMLFiles(ctx context.Context) ([]string, error) {
-	if s.fsys == nil {
-		return nil, errors.New("filesystem is nil")
-	}
-	return filecatalog.FindFSYAMLFiles(ctx, s.fsys, s.root)
-}
-
-func (s fsPromptSource) readDefinition(name string) ([]byte, error) {
-	return fs.ReadFile(s.fsys, name)
-}
-
-func (s fsPromptSource) displayPath(name string) string {
-	return filecatalog.DisplayPath(s.root, name)
-}
-
-func (s fsPromptSource) readContentFile(sourcePath string, contentFile string) (string, string, error) {
-	return s.contentRoot.readContentFile(sourcePath, contentFile)
-}

internal/promptdef/testdata/both_content_and_content_file.yaml

@@ -1,10 +0,0 @@
-id: both-content-and-content-file
-version: "1.0.0"
-messages:
-  - role: user
-    content: "Hi"
-    content_file: ./messages/user_prompt.tmpl
-output:
-  format: text
-  validation_mode: none
-  repair_attempts: 0

internal/promptdef/testdata/duplicate_input_names.yaml

@@ -1,14 +0,0 @@
-id: duplicate-input-names
-version: "1.0.0"
-inputs:
-  - name: transcript
-    required: true
-  - name: transcript
-    required: false
-messages:
-  - role: user
-    content: "Hi"
-output:
-  format: text
-  validation_mode: none
-  repair_attempts: 0

internal/promptdef/testdata/empty_cache_control_type.yaml

@@ -1,10 +0,0 @@
-id: empty-cache-control-type
-version: "1.0.0"
-messages:
-  - role: system
-    content: "Use cached instructions."
-    cache_control: {}
-output:
-  format: markdown
-  validation_mode: basic
-  repair_attempts: 0

internal/promptdef/testdata/invalid_validation_mode.yaml

@@ -1,9 +0,0 @@
-id: invalid-validation-mode
-version: "1.0.0"
-messages:
-  - role: user
-    content: "Hi"
-output:
-  format: text
-  validation_mode: nope
-  repair_attempts: 0

internal/promptdef/testdata/invalid_yaml.yaml

@@ -1,9 +0,0 @@
-id: invalid-yaml
-version: "1.0.0"
-messages:
-  - role: user
-    content: [broken
-output:
-  format: text
-  validation_mode: none
-  repair_attempts: 0

internal/promptdef/testdata/json_schema_without_schema_path.yaml

@@ -1,9 +0,0 @@
-id: json-schema-without-schema-path
-version: "1.0.0"
-messages:
-  - role: user
-    content: "Return JSON"
-output:
-  format: json
-  validation_mode: json_schema
-  repair_attempts: 0

internal/promptdef/testdata/messages/user_prompt.tmpl

@@ -1,2 +0,0 @@
-Use transcript:
-{{input "transcript"}}

internal/promptdef/testdata/missing_content_file.yaml

@@ -1,9 +0,0 @@
-id: missing-content-file
-version: "1.0.0"
-messages:
-  - role: user
-    content_file: ./messages/does_not_exist.tmpl
-output:
-  format: text
-  validation_mode: none
-  repair_attempts: 0

internal/promptdef/testdata/missing_id.yaml

@@ -1,8 +0,0 @@
-version: "1.0.0"
-messages:
-  - role: user
-    content: "Hi"
-output:
-  format: text
-  validation_mode: none
-  repair_attempts: 0

internal/promptdef/testdata/neither_content_nor_content_file.yaml

@@ -1,8 +0,0 @@
-id: neither-content-nor-content-file
-version: "1.0.0"
-messages:
-  - role: user
-output:
-  format: text
-  validation_mode: none
-  repair_attempts: 0

internal/promptdef/testdata/no_messages.yaml

@@ -1,6 +0,0 @@
-id: no-messages
-version: "1.0.0"
-output:
-  format: text
-  validation_mode: none
-  repair_attempts: 0