# Troubleshooting

Use this guide with [configuration](config.md) and [operations](operations.md).
Messages are emitted through the standard logger on stderr.

## `config load failed: ... read "config.yml"`

Symptom: startup exits before building sources or sinks.

Likely cause: the process working directory does not contain `config.yml`, or
the runtime user cannot read it.

Diagnostic: run `pwd` in the same working directory used by the process, then
check `ls -l config.yml`.

Safe fix: place the intended config at `./config.yml`, change the working
directory, or mount the file at `/weatherfeeder/config.yml` when using the
provided container image.

## `config load failed: ... parse YAML`

Symptom: startup exits with a YAML parse error or an unknown field error.

Likely cause: invalid YAML syntax, multiple YAML documents, or a misspelled
config struct field.

Diagnostic: inspect the line and field in the error. Feedkit uses strict YAML
field decoding for config struct fields.

Safe fix: correct the YAML and compare the shape with
[configuration](config.md). Driver-specific `params` keys are validated by their
source or sink constructors.

## `config validation failed`

Symptom: startup exits and prints one or more validation messages.

Likely cause: missing `sources` or `sinks`, blank names, duplicate source or sink
names, invalid `mode`, missing `every` for a polling source with `mode: poll`, or
a route that references an unknown sink.

Diagnostic: read every bullet under `config validation failed`; the loader sorts
these messages so multiple issues can be fixed in one edit.

Safe fix: update the top-level config fields as documented in
[configuration](config.md).

## `unknown source driver`

Symptom: startup exits with `build source failed`.

Likely cause: `sources[].driver` does not match a registered weatherfeeder
source driver.

Diagnostic: compare the configured driver with the source driver table in
[configuration](config.md#source-drivers).

Safe fix: correct the driver name. Current drivers include `nws_observation`,
`nws_alerts`, `nws_forecast_hourly`, `nws_forecast_narrative`,
`nws_forecast_discussion`, `nws_weatherstories`, `openmeteo_observation`,
`openmeteo_forecast`, `openweather_observation`, and
`spc_convective_outlook`.

## `unknown sink driver`

Symptom: startup exits with `build sink failed`.

Likely cause: `sinks[].driver` is not registered.

Diagnostic: compare the configured driver with the sink driver table in
[configuration](config.md#sink-drivers).

Safe fix: use `stdout`, `nats`, or `postgres`.

## `source expected kinds validation failed`

Symptom: startup exits after building a source.

Likely cause: `sources[].kinds` declares a kind the source does not emit.

Diagnostic: compare the configured `kinds` list with the source driver kind in
[configuration](config.md#source-drivers).

Safe fix: remove `kinds` or set it to the kind emitted by that driver.

## `params.url is required` Or `params.user_agent is required`

Symptom: startup exits with `build source failed`.

Likely cause: a source is missing required HTTP params, or the values are blank
or not strings.

Diagnostic: inspect the named source in the error and check its `params`.

Safe fix: add non-empty `url` and `user_agent` values. See
[HTTP source params](config.md#http-source-params).

SPC convective outlook sources do not use `params.url`; they require
`latitude`, `longitude`, and `user_agent`. See
[SPC convective outlook params](config.md#spc-convective-outlook-params).

## `params.latitude is required` Or `params.longitude is required`

Symptom: startup exits for an `spc_convective_outlook` source.

Likely cause: the source is missing one of the configured point coordinates.

Diagnostic: inspect the named SPC source in the error and check its `params`.

Safe fix: add numeric `latitude` and `longitude` values in decimal degrees.

## `url must include units=metric`

Symptom: startup exits for an `openweather_observation` source.

Likely cause: the OpenWeather URL omits `units=metric` or sets another unit
system.

Diagnostic: inspect the query string in `params.url`.

Safe fix: add `units=metric` to the OpenWeather current-weather URL. Keep API
keys out of committed configs.

## `source ... sources[].every must be > 0 for polling sources`

Symptom: startup exits while building scheduler jobs.

Likely cause: a current weatherfeeder polling source has no usable `every`
interval.

Diagnostic: inspect the named `sources[]` entry and check `every`.

Safe fix: set a positive duration such as `1m`, `10m`, or `1h`.

## `build sink failed ... params.url is required`

Symptom: startup exits while building a NATS sink.

Likely cause: the NATS sink is missing `params.url`, or the value is blank or
not a string.

Diagnostic: inspect the named sink in the error and check its `params`.

Safe fix: set a NATS URL such as `nats://localhost:4222`.

## `build sink failed ... params.subject is required`

Symptom: startup exits while building a NATS sink.

Likely cause: the NATS sink is missing `params.subject`, or the value is blank
or not a string.

Diagnostic: inspect the named sink in the error and check its `params`.

Safe fix: set a non-empty subject such as `weatherfeeder`.

## `dispatch: sink ... failed consuming event ... NATS sink: connect`

Symptom: the daemon starts, but NATS events are not published.

Likely cause: the NATS server URL is unreachable, the server is not accepting
connections, or the configured URL is wrong for the runtime network.

Diagnostic: from the same runtime environment, check that the host and port in
`sinks[].params.url` are reachable.

Safe fix: correct the NATS URL or restore broker connectivity. Other configured
sinks continue receiving events.

## `postgres sink ... open db`

Symptom: startup exits while building a Postgres sink.

Likely cause: the database URI, username, password, network path, or database
availability is wrong.

Diagnostic: inspect `sinks[].params.uri`, `username`, and `password`; verify
that the same runtime environment can reach the database.

Safe fix: correct the credentials or URI, restore database connectivity, then
restart the daemon.

## `postgres sink ... ensure table` Or `ensure index`

Symptom: startup exits during Postgres initialization.

Likely cause: the database user cannot create required tables or indexes, an
existing object conflicts with weatherfeeder's expected table contract, or the
database is unavailable during initialization.

Diagnostic: inspect the named table or index in the error and compare existing
database objects with the [Postgres table contract](integrations/postgres.md).

Safe fix: grant the needed database privileges, create a compatible schema, or
perform an operator-managed migration before restarting.

## `postgres sink: insert into ...`

Symptom: the daemon starts, but Postgres writes for some events fail.

Likely cause: a duplicate primary key, incompatible existing table definition,
database constraint error, or connection failure during a write transaction.

Diagnostic: inspect the table name and database error in the log. Compare the
table with [Postgres integration](integrations/postgres.md).

Safe fix: repair the database schema or address the duplicate/connection issue.
Other configured sinks continue receiving events.

## No Events Appear On A Sink

Symptom: the daemon is running but the expected sink receives no events.

Likely cause: the route does not match the event kind, the source has not
emitted changed content, or the sink is failing per event.

Diagnostic: check `routes`, source `kinds`, and logs for `scheduler: poll
failed`, `dispatcher: pipeline error`, or `dispatch: sink ... failed consuming
event`.

Safe fix: correct the route or source configuration. If the source uses
conditional HTTP and the upstream has not changed, no event is emitted for a
`304 Not Modified` response; wait for changed upstream content or temporarily
set `params.conditional: false` for diagnosis.

## `scheduler: poll failed`

Symptom: one source logs poll failures while the daemon keeps running.

Likely cause: upstream HTTP error, bad URL, timeout, response body limit, or
provider response shape that the source cannot parse.

Diagnostic: inspect the source name in the log and review its HTTP params.

Safe fix: correct the URL, user agent, timeout, or body limit. The next
scheduled poll will retry.

## `dispatcher: pipeline error`

Symptom: source polling succeeds, but one event is dropped before sinks.

Likely cause: a normalizer could not decode or map the raw payload, or dedupe
received an invalid event ID.

Diagnostic: inspect the error text and the source/schema that produced the
event. Review the [event wire contract](integrations/events.md) for expected
canonical fields.

Safe fix: correct source configuration if it points to the wrong upstream
product. If the upstream payload changed shape, update the relevant normalizer
and tests.